• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.19-26
• /
• 2004

This study constructs the reduced system by two-level condensation scheme. This scheme consists of two steps. First step selects the candidate area for the primary degrees of freedom by energy estimation in element level. In the second step, the primary degrees of freedom are selected by the sequential elimination scheme. The efficiency and reliability of this scheme is shown through the prediction of eigenvalues of a few numerical examples. Time integration in the reduced system can save the computing time effectively. The well-constructed reduced system can present the accurate behavior of the structure under arbitrary dynamic loads so much as the global system. Through the numerical example, the efficiency and reliability of the proposed scheme will be demonstrated.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.501-504
• /
• 2010

In this study, fire behavior for subway coach fire in the 1/10 reduced scale model is analyzed using numerical analysis method (FDS). The size of the reduced model coach is 1.9 m long, 0.290 m high and 0.235 m. The simulation is carried out only one-sided four doors of the coach are opened. A fire source is the n-heptane pool fire with a mean heat release rate 2.33 kW. Smoke temperature, heat release rate and mass loss rate for the model are calculated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.343-348
• /
• 2003

In this study, optimum designs of the air-bearing surface (ABS) are achieved using the reduced basis concept which can effectively reduce the number of design variables without cutting down on the design space. Even though the optimization method is easier and more applicable to handle than the trial-and-error method, its efficiency is largely dependent on the number of the design variables. Hence, the reduced basis concept is applied, by which the desired design can be defined as a linear combination of basis designs. The simulation results show the effectiveness of the proposed approach by obtaining the optimum solutions of the sliders whose target flying heights are 25, 20, and 15nm.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.491-496
• /
• 2003

In sensitivity analysis, semi-analytical method(SAM) reveals severe inaccuracy problem when relatively large rigid body motions are identified for individual elements. Recently such errors of SAM resulted by the finite difference scheme have been improved by the separation of rigid body mode. But the eigenvalue should be obtained first before the sensitivity analysis is performed and it takes much time in the case that large system is considered. In the present study, by constructing a reduced one from the original system, iterative method combined with mode decomposition technique is proposed to compute reliable semi-analytical design sensitivities. The sensitivity analysis is performed by the eigenvector acquired from the reduced system. The error of SAM caused by difference scheme is alleviated by Von Neumann series approximation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.5
• /
• pp.235-242
• /
• 2020

This paper analyzes the effect of reduced output width of the truncated logarithmic multiplication and application to inferences using convolutional neural networks (CNNs). For small hardware overhead, output width is reduced in the truncated Mitchell multiplier, so that fractional bits in multiplication output are minimized in error-resilient applications. This analysis shows that when reducing output width in the truncated Mitchell multiplier, even though worst-case relative error increases, average relative error can be kept small. When adopting 8 fractional bits in multiplication output in the evaluations, there is no significant performance degradation in target CNNs compared to existing exact and original Mitchell multipliers.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.6
• /
• pp.439-444
• /
• 2002

In this paper, a new model reduction method is proposed to obtain a reduced order model in the frequency domain. The method is developed based on the second-order plus dead time modeling technique. The initial value of the reduced model parameters can be obtained using this method coinciding four point(0, -$\pi$/2, -$\pi$, -3$\pi$/2) on the Nyquist curve. The optimal parameters of the reduced model is obtained through calculation procedure with three steps. It is shown that Nyquist curves and unit step responses of the reduced models of numerical examples closely agree with those of original models.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.948-955
• /
• 1987

The model reduction method of the high order linear time invariant systems is proposed. The continuous fraction expansion of Auxiliary denominator polynomial is used to obtain denominator polynomial of the reduced order model, and the numerator polynomial of the reduced order model is obtained by equating the first some moments of the original and the reduced order model, using simplified moment function. This methiod does not require the calculation of the reciprocal transformation which should be calculated in Routh approximation, furthemore the stability of the reduced order model is guaranted if original system is stable. Responses of this method showed us good characteristics.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.2
• /
• pp.155-160
• /
• 2007

A fault detection and isolation (FDI) problem is considered for inertial sensors, such as gyroscopes and accelerometers and a new FDI method for double faults is proposed using reduced-order parity vector. The reduced-order parity vector (RPV) algorithm enables us to isolate double faults with 7 sensors. Averaged parity vector is used to reduce false alarm and wrong isolation, and to improve correct isolation. The RPV algorithm is analyzed by Monte-Carlo simulation and the performance is given through fault detection probability, correct isolation probability, and wrong isolation probability.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.9
• /
• pp.50-59
• /
• 1997

This paper is on the generalized singular perturbation approximation (GSPA) preserving the discrete positive real property. We transform the discrete positive real(PR) system into a stochastically banlanced system and get the reduced order discrete system from the GSPA of the full order stochastically balanced system. eSPECIALLY, WHEN THE FREE PARAMETER OF THE gspa IS .+-.1, we show that the reduced order discrete system retains stability, minimality, and positive real and stochstically balancing properties. And we derived the .inf.-norm error bound with the reduced order discrete strictly positive real(SPR) system by the proposed method. Finally, we give an example to ascertain the properties of the proposed reduced order discrete system and to compare with the conventional methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.12
• /
• pp.2315-2325
• /
• 2011

We propose a novel reduced-state maximum-likelihood sequence detection (MLSD) structure using the Viterbi algorithm based on the second-order Volterra kernel modeling nonlinear distortion due to square law detection of multipath channels commonly occurring in chromatic dispersion (CD) or polarization mode dispersion (PMD) in optical communication systems. While all existing MLSD methods for square-law detection receivers are based on direct computation of branch metrics, the proposed algorithm provides an efficient and structured way to implement reduced-state MLSD with almost the same complexity of a MLSD for linear channels. As a result, the proposed algorithm reduces the number of parameters to be estimated and the complexity of computation.