• 자원환경지질
• /
• 제34권5호
• /
• pp.437-446
• /
• 2001

부산 보배견운모 광상의 프로필리틱 열수변질대에서 형성된 녹염석은 다양한 누대구조를 수반하는데, 다중결정성장 누대구조, 진동누대구조, patchy누대구조 및 강도가 약한 불규칙한 누대구조가 특징적이다. 누대구조는 주로 열수용 액의 AI Fe의 활동도에 좌우되며, 전반적으로 결정의 중심부에서는 AI, 가장자리에서는 Fe의 함량이 높다. 녹염석 의 Ps는 18.5-34.3 mot.% 범위이다. 여러 결정이 중첩하여 형성된 누대구조에서는 잔류조직이 부분적으로 흡수용해 되었으며, 이후에 결정들이 새로 성장하였다. 다중결정성장 누대구조나 진동누대구조는 열수시스템의 유체의 화학조성, 산화환원전위, 온도 등과 같은 물리화학적 변수들이 급격하게 변동하였음 지시한다

• 전기화학회지
• /
• 제7권3호
• /
• pp.138-142
• /
• 2004

본 연구에서 CSA로 도핑된 EB와 LEB 형태의 폴리아닐린 필름을 ITO전극위에 m-cresol, chloroform 혼합용액을 도포시켜 제조하였다. UV 실험결과로부터 m-cresol에 의한 이차 도핑 효과를 확인 할 수 있었으며, m-cresol의 양이 증가할수록 폴리아닐린 필름의 전도도는 증가하였다. 폴리아닐린의 전기화학적 실험결과 LEB로 제작된 폴리아닐린 전극의 산화$\cdot$환원 피크 전류는 EB로 제작된 폴리아닐린 전극보다 더 크고 가역적인 것을 CV를 통해 구할 수 있었다. 또한 전하전달 저항은 m-cresol의 양이 증가할수록 감소하였으며, LEB/CSA전극의 전하 전달 저항 갈이 EB/CSA 전극보다 작았다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.687-690
• /
• 2004

Fabrication and characterization of dye-sensitized TiO2 solar cells(DSSC) consisting of spray-coated TiO2 electrode, an electrolyte containing I-/I3- redox couple, and a Pt-coated counter electrode carried out, using mainly FE-SEM and solar simulator. Also, effect of rapid thermal annealing(RTA) temperatue on I-V curves of DSSCS consisting of approximately 10m thickness and $5{\times}5mm2$ active area. No significant difference in the apparent size of TiO2 clusters was observed with increasing RTA temperature. Also, an open circuit voltage(Voc) of approximately 0.70V and a short-circuit photocurrent(Jsc) of 8 to 12mA/cm2 were observed in the TiO2 solar cell. With increasing RTA temperature upto 550oC, photocurrent density of dye-sensitized solar cells was enhanced, leading to enhancing the efficiency of dye-sensitized solar cells having Pt-electroplated counter electrode.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권1호
• /
• pp.80-84
• /
• 2008

We systematically investigated the resistive switching properties of thin $TiO_2$ films on Pt/Ti/$SiO_2$/Si substrates that were embedded with a Co ultra thin layer. An in-situ sputtering technique was used to grow both films without breaking the chamber vacuum. A stable bipolar switching in the current-voltage curve was clearly observed in $TiO_2$ films with an embedded Co ultra thin layer, addressing the high and low resistive state under a bias voltage sweep. We propose that the underlying origin involved in the bipolar switching may be attributed to the interface redox reaction between the Co and $TiO_2$ layers. The improved reproducible switching properties of our novel structures under forward and reverse bias stresses demonstrated the possibility of future non-volatile memory elements in a simple capacitive-like structure.

• Natural Product Sciences
• /
• 제12권4호
• /
• pp.175-192
• /
• 2006

Screening for the cytotoxicity from plant origin is the first stage for anti-cancer drug development. A variety of terpenoids with exomethylene, epoxide, allyl, $\alpha,\beta-unsaturated$ carbonyl, acetylenes, and $\alpha-methylene-\gamma-lactone$ induces apoptosis and/or differentiation as well as cytotoxicity through the ROS signal transduction pathways. These are found among monoterpenes, sesquiterpenes, triterpenes, flavonoids, coumarins, diarylheptanoids, and even organosulfuric compounds. The most essential characteristics of natural cytotoxic substances is to possess the strong electrophilicity that is susceptible to nucleophilic biomolecules in the cell. Thiol-reductants and superoxide dismutase can block or delay apoptosis. Thus, ROS and the resulting cellular redox-potential changes can be parts of the signal transduction pathway during apoptosis. Disturbance of the balance of oxireduction by the pigment of natural quinones also caused the induction of the differentiation and apoptosis. Saponins with the cytotoxicity are restricted to their monodesmosides, rather than to bisdesmosides. Those saponins exhibited calcium ion-mediated apoptosis in addition to cytotoxicity whereas they showed also differentiation without extracellular calcium ion. The properties on cytotoxicity, apoptosis, and differentiation were assumed to depend on resultant oxidative stress to the cells. In this review, we describe a spectrum of cytotoxic compounds with various action mechanisms.

• 한국대기환경학회지
• /
• 제22권3호
• /
• pp.373-381
• /
• 2006

The catalytic combustion of toluene was investigated on the Cu-Mn oxide catalysts prepared by the deposition-precipitation method. Experiment of toluene combustion was performed with a fixed bed flow reactor in the temperature range of $100{\sim}280^{\circ}C$. Among the catalysts, 1.29Cu/Mn showed the most activity at $260^{\circ}C$. The deposition-precipitation method may be showed the potential to enhance the activity of catalysts. The catalysts were characterized by BET, scanning electron microscopy (SEM), temperature-programmed reduction (TPR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) techniques. On the basis of catalyst characterization data, the results showed that the surface of catalysts by deposition-precipitation method had uniform distribution and smaller particle size, which enhanced the reduction capability of catalysts. The XRD results showed that $Cu_{1.5}Mn_{1.5}O_{4}$ spinel phase was made by deposition-precipitation method, and increased catalyst activity and redox characteristic. It was assumed that the reduction step of $Cu_{1.5}Mn_{1.5}O_{4}$ spinel phase progressed $Cu_{1.5}Mn_{1.5}O_{4}\;to\;CuMnO_{2},\;and\;Cu_{2}O\;to\;CuMn_{2}O_{4}\;and\;Cu$.

• 한국환경과학회지
• /
• 제23권10호
• /
• pp.1745-1753
• /
• 2014

Sediment microbial fuel cell (SMFC), equipped with Zn, Al, Cu, Fe or graphite felt (GF) anode and marine sediment, was performed. Graphite felt was used as a common cathode. SMFC was single chambered and did not use any redox mediator. The aim of this work was to find efficient anodic material. Oxidation reduction potential (ORP), cell voltage, current density, power density, pH and chemical oxygen demand (COD) were measured for SMFC's performance.. The order of maximum power density was $913mWm^{-2}$ for Zn, $646mWm^{-2}$ for Fe, $387.8mWm^{-2}$ for Cu, $266mWm^{-2}$ for Al, and $127mWm^{-2}$ for graphite felt (GF). The current density over voltage was found to be strongly correlated with metal electrodes, but the graphite felt electrode, in which relatively weaker electricity was observed because of its bio-oriented mechanism. Metal corrosion reactions and/or a complicated microbial electron transfer mechanism acting around the anodic compartment may facilitate to generate electricity. We presume that more sophisticated selection of anodic material can lead to better performance in SMFC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.93-94
• /
• 2006

In this research, the enhancement of electron-transfer activity of hemoglobin (Hb) in dodecanoic acid film was investigated for the first time. This type of composite film was made on glassy carbon electrode by casting method. Cyclic voltammetric result of the modified electrode displays a well defined redox peaks which was attributed to the direct electrochemical response of Rb. Our results illustrate that Rb exchange electrons directly with electrode and exhibits the characteristics of peroxidase. When we apply this modified electrode as a biosensor, it gives excellent performances in the electrocatalytic reduction of hydrogen peroxide ($H_{2}O_{2}$). Through the optimal conditions, the proposed biosensor shows the linear range for H2O2 determination was from $1{\times}10^{-5}$ to $1.25{\times}10^{-4}mol/L$ with a detection limit of $1{\times}10^{-7}mol/L$. The biosensor retained more than 90% of the initial response after 14 days.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권3호
• /
• pp.115-118
• /
• 2005

Currently, molecular devices are reported utilizing active self-assembled monolayers (SAMs) containing the nitro group as the active component, which has active redox centers [1]. SAMs are ordered molecular structures formed by the adsorption of an active surfactant on a solid surface. The molecules will be spontaneously oriented toward the substrate surface and form an energetically favorable ordered layer. During this process, the surface-active head group of the molecule chemically reacts with and chemisorbs onto the substrate In this paper, the electrical properties of the 4'4- di(ethynylphenyl)-2'-nitro-1-benzenethiolate was confirmed. This material is well known as a conducting molecule having possible application to molecular level negative differential resistance (NDR) device. To deposit the self-assembly monolayers onto the gold electrode, the prefabricated Au(1 l l) substrates were immersed into 0.5[mM/l] self-assembly molecule in THF solution. Then, the electrical properties and surface morphologies of 4' 4-di(ethynylphenyl)-2' -nitro-1-benzenethiolate were measured by using the ultra-high vacuum scanning tunneling microscopy (UHV-STM).

• 한국전기전자재료학회논문지
• /
• 제32권3호
• /
• pp.223-228
• /
• 2019

We fabricated a printed Ag:CNT film as a liquid sensor for the detection of HNS (hazardous and noxious substances) in seawater. The paste required for printing was prepared using Ag powder, MWCNTs (multi-walled carbon nanotubes), and an organic binder. The heat treatment process for binder removal was optimized. In order to confirm that the sensor was operational, the resistance change characteristics in brine (3.5%) and methanol (99.8%) were assessed at $20^{\circ}C$. EDL (electrical double layer) formation and redox reactivity were confirmed as the most important reactions affect each electrical property of sensor in brine and methanol. From these results, it was determined that printed Ag:CNT film can be applied as a sensor to detect HNS in seawater.