• 제목/요약/키워드: Red luminescence

검색결과 157건 처리시간 0.023초

대기중에서 aged된 다공성 실리콘의 2가지 발광 band에 관한 연구 (On the study of two luminescence band structfue from ambient air aged porous silicon)

  • Sung-Sik Chang;Akira Sakai
    • 한국결정성장학회지
    • /
    • 제6권4호
    • /
    • pp.564-570
    • /
    • 1996
  • 급속 열산화 없이 다공성 실리콘으로부터 적색 및 청색 발광을 관찰할 수 있었다. 묽은 HF 농도에서, 특히 짧은 양극 산화 북식으로제조한 aged 된 다공성 실리콘은 청색band 의 증가를 나타내었다. 상온에서 측정된 발광 decay 시간은 약 100 ps를 나타내었고 20K에서 측정된 값에 비하여 상당히 빠른 값을 지니고 있었다. 청색 광발광 peak 최대값은 액체질소온도에서 청색전이를 나타내지 않았다. 그러나 적색 광발광 band는 77K 에서 적색으로 전이를 하였고 황색을 나타내었다. 적색 발광의 origin은 Si 결정과 연관이 있는 것으로 사료되어지는 한편 청색 발광은 Si결정과 무관한 것으로 생각되어 진다.

  • PDF

(Sr1Ca)TiO3:Pr1Al 형광체의 제조와 발광특성 (Preparation and Luminescent Properties of (Sr1Ca)TiO3:Pr1Al Phosphors)

  • 박창섭;이정운;유일
    • 한국전기전자재료학회논문지
    • /
    • 제19권5호
    • /
    • pp.422-426
    • /
    • 2006
  • [ $Sr_xCa_{(1-x)}TiO_3$ ] red phosphors doped with Pr(0.13 mol%) and Al(0.23 mol%) were synthesized by solid state reaction method. Change of crystal structure occurred in $Sr_xCa_{(1-x)}TiO_3:Pr,Al$ phosphors with increasing value of x. Green and red luminescence were observed from $SrTiO_3:Pr,Al$ phosphors at low temperature. However, only red luminescence in the case of $CaTiO_3:Pr,Al$ phosphors was measured at low temperature. The main cause of green luminescence was explained by the bandgap reduction.

Luminescence Enhancement by Ba in SrTiO3:Pr, Al Red Phosphor for Field Emission Displays

  • Won, Chang-Whan;Lee, Jong-Eun;Won, Hyung-Il;Kim, Kwang-Bok;Song, Yoon-Ho;Kang, Seung-Youl;Koo, Kyoung-Wan
    • 한국세라믹학회지
    • /
    • 제43권11호
    • /
    • pp.743-745
    • /
    • 2006
  • The luminescence properties of $Sr_{1-x}Ba_xTiO_3:Pr$, Al red phosphor for Field Emission Displays (FEDs) have been investigated in powders prepared though solid-state reactions. $Sr_{1-x}Ba_xTiO_3:Pr$, Al red phosphors indicate a higher luminescent intensity, and have been found to have potential for field emission displays. The addition of Ba increased the luminescence intensity at 617 nm by up to 30%. Ba ions are effective in producing the energy transfers from host-to-activator in 4f-5d transitions.

이가 양이온 금속 친환 및 유기 첨가제를 이용하여 분무열분해법으로 제조된 Y2O3:Eu3+ 적색 형광체의 휘도 개선 (Photoluminescence Enhancement of Y2O3:Eu3+ Red Phosphor Prepared by Spray Pyrolysis using Aliovalent Cation Substitution and Organic Additives)

  • 민병호;정경열
    • 한국분말재료학회지
    • /
    • 제27권2호
    • /
    • pp.146-153
    • /
    • 2020
  • The co-doping effect of aliovalent metal ions such as Mg2+, Ca2+, Sr2+, Ba2+, and Zn2+ on the photoluminescence of the Y2O3:Eu3+ red phosphor, prepared by spray pyrolysis, is analyzed. Mg2+ metal doping is found to be helpful for enhancing the luminescence of Y2O3:Eu3+. When comparing the luminescence intensity at the optimum doping level of each Mg2+ ion, the emission enhancement shows the order of Zn2+ ≈ Ba2+ > Ca2+ > Sr3+ > Mg2+. The highest emission occurs when doping approximately 1.3% Zn2+, which is approximately 127% of the luminescence intensity of pure Y2O3:Eu3+. The highest emission was about 127% of the luminescence intensity of pure Y2O3:Eu3+ when doping about 1.3% Zn2+. It is determined that the reason (Y, M)2O3:Eu3+ has improved luminescence compared to that of Y2O3:Eu3+ is because the crystallinity of the matrix is improved and the non-luminous defects are reduced, even though local lattice strain is formed by the doping of aliovalent metal. Further improvement of the luminescence is achieved while reducing the particle size by using Li2CO3 as a flux with organic additives.

Synthesis and Luminescence Properties of CaS:Eu2+,Si4+,Ga3+ for a White LED

  • Oh, Sung-Il;Jeong, Yong-Kwang;Kang, Jun-Gill
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권2호
    • /
    • pp.419-422
    • /
    • 2009
  • The luminescence intensity of calcium sulfide codoped with $Eu^{2+},\;Si^{4+}\;and\;Ga^{3+}$ was investigated as a function of the dopant concentration. An enhancement of the red luminescence resulted from the incorporation of $Si^{4+}\;and\;Ga^{3+}\;into\;CaS:Eu^{2+}.\;The\;non-codoped\;CaS:Eu^{2+}$ converted only 3.0% of the absorbed blue light into luminescence. As the $Si^{4+}\;and\;Ga^{3+}$ were embedded into the host lattice, the luminescence intensity increased and reached a maximum of Q = 10.0% at optimized concentrations of the codopants in CaS. Optimized CaS:$Eu^{2+},Si^{4+},Ga^{3+}$ phosphors were fabricated with blue GaN LED and the chromaticity index of the phosphor-formulated GaN LED was investigated as a function of the wt% of the optimized phosphor.

Synthesis and Luminescence Properties of Sr/SmSi5N8:Eu2+ Phosphor for White Light-Emitting-Diode

  • Luong, Van Duong;Lee, Hong-Ro
    • 한국표면공학회지
    • /
    • 제47권4호
    • /
    • pp.192-197
    • /
    • 2014
  • Red-emitting nitride phosphors recently attracted considerable attention because of their high thermal stability and high color rendering index properties. For excellent phosphor of white light-emitting-diode, ternary nitride phosphor of $Sr/SmSi_5N_8:Eu^{2+}$ with different $Eu^{2+}$ ion concentration were synthesized by solid state reaction method. In this work, red-emitting nitride $Sr/SmSi_5N_8:Eu^{2+}$ phosphor was successfully synthesized by using multi-step high frequency induction heat treatment. The effects of molar ratio of component and experimental conditions on luminescence property of prepared phosphors have been investigated. The structure and luminescence properties of prepared $Sr/SmSi_5N_8:Eu^{2+}$ phosphors were investigated by XRD and photoluminescence spectroscopy. The excitation spectra of $Sr/SmSi_5N_8:Eu^{2+}$ phosphors indicated broad excitation wavelength range of 300 - 550 nm, namely from UV to visible area with distinct enhanced emission peaks. With an increase of $Eu^{2+}$ ion concentration, the peak position of emission in spectra was red-shifted from 613 to 671 nm. After via multi-step heat treatment, prepared phosphor showed excellent luminescence properties, such as high emission intensity and low thermal quenching, better than commercial phosphor of $Y_3Al_5O_{12}:Ce^{3+}$. Using $Eu_2O_3$ as a raw material for $Eu^{2+}$ dopant with nitrogen gas flowing instead of using commercial EuN chemical for $Sr/SmSi_5N_8:Eu^{2+}$ synthesis is one of characteristic of this work.

Synthesis and luminescence properties of SrS:Eu red phosphors by solid state method

  • Kim, Jae-Myung;Kim, Kyung-Nam;Park, Joung-Kyu;Kim, Chang-Hae;Jang, Ho-Gyeom
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.640-643
    • /
    • 2004
  • We have synthesized SrS:Eu red phosphor by solid state method and investigated to adopt a red phosphor for LEDs. The SrS:Eu phosphor shows broad emission band at 600nm region due to f-d energy transfer of $Eu^{2{\cdot}}$. Our results show that the SrS:Eu red phosphor exhibits the better luminescence efficiency than that of the industrially available product SrS:Eu phosphor.

  • PDF

Detection of Gamma-irradiated Red and Black Pepper Powders in a Model Meat Product by Photostimulated Luminescence

  • Shin, Mee-Hye;Yoon, Yo-Han;Sharma, Arun Kumar;Lee, Ju-Woon
    • 한국축산식품학회지
    • /
    • 제30권2호
    • /
    • pp.232-235
    • /
    • 2010
  • This study examined the photostimulated luminescence (PSL) detection method suggested by the Korean Food and Drug Administration to assess whether the method can be used to identify irradiated spices in restructured pork patties, which served as a model system for processed meat products. Red and black pepper powders were irradiated at 0, 5.0, 7.5, and 10 kGy, and pork patties were formulated with the spice at irradiated pepper concentrations of 0.1% and 0.5%. PSL was then used to estimate amounts of light derived from the spice itself and pork patties. The results of PSL analysis showed that red and black pepper powders were determined as positive and presumptive positive, respectively, when irradiated at more than 7.5 kGy. However, when used in pork patties, all samples were negative for irradiation. Thus, PSL may not be useful in detecting irradiated ingredients used in processed meat products.

Luminescence Characteristics of ZnGa2O4:Mn2+,Cr3+ Phosphor and Thick Film

  • Cha, Jae-Hyeok;Choi, Hyung-Wook
    • Transactions on Electrical and Electronic Materials
    • /
    • 제12권1호
    • /
    • pp.11-15
    • /
    • 2011
  • In this study, $ZnGa_2O_4$ phosphors in its application to field emission displays and electroluminescence were synthesized through the precipitation method and $Mn^{2+}$ ions. A green luminescence activator, $Cr^{3+}$ ions, and a red luminescence activator were separately doped into $ZnGa_2O_4$, which was then screen printed to an indium tin oxide substrate. The thick films of the $ZnGa_2O_4$ were deposited with the various thicknesses using nano-sized powder. The best luminescence characteristics were shown at a thickness of 60 ${\mu}m$. Additionally, green-emission $ZnGa_2O_4:Mn^{2+}$ and red-emission $ZnGa_2O_4:Cr^{3+}$ phosphor thick films, which have superior characteristics, were manufactured through the screen-printing method. These results indicate that $ZnGa_2O_4$ phosphors prepared through the precipitation method have wide application as phosphor of the full color emission.

Er과 Y을 첨가한 SrTiO3:Al1Pr 형광체의 발광특성 (Luminescent Properties of SrTiO3:Al1Pr Phosphors doped with Er and Y)

  • 박창섭;이종백;유일
    • 한국전기전자재료학회논문지
    • /
    • 제19권10호
    • /
    • pp.971-975
    • /
    • 2006
  • [ $SrTiO_3:Al,Pr$ ] red phosphors doped with Y and Er were synthesized by solid state reaction method. The luminescence properties of $SrTiO_3:Al,Pr$ phosphors before and after doping were examined by photoluminescence. Efforts were paid to elucidate the cause of the increase of green luminescence in $(Sr_{0.95}Y_{0.05})TiO_3:Pr,Er\;and\;(Sr_{0.95}Y_{0.05})TiO_3:Pr,Al$ phosphors. The enhanced green luminescence was interpreted by the energy transfer between $Er^{3+}\;and\;Pr^{3+}$ ions, and the change of bandgap in the $(Sr_{0.95}Y_{0.05})TiO_3:Pr$ phosphors.