• 제목/요약/키워드: Recycled paper

검색결과 586건 처리시간 0.02초

컬화가 펄프 섬유의 특성에 미치는 영향 (Effect of Curling on the Characteristics of Pulp Fibers)

  • 원종명;이재훈;한창석
    • 펄프종이기술
    • /
    • 제33권1호
    • /
    • pp.45-52
    • /
    • 2001
  • Recycling of wastepaper is very important for the environmental protection. However inferior strength and slower drainage characteristic that are brought by the hornification and the increase of fines respectively limited the increase of wastepaper recycling. The purpose of this study is to obtain some fundamental information that is helpful to develop the technologies which can improve the characteristics of recycled fibers. Softwood bleached kraft pulp was curlated with Hobart mixer at several different consistency. The curlation of fibers can cause the internal fibrillation and decreasing the crystallinity without serious damage of fiber surface. Curl index, kink index, freeness and WRV were increased, but crystallinity was decreased with the increase of curlation consistency.

  • PDF

고지재생연구(제 8보) -제지 공정수 폐쇄화에 따른 오여- (Recycling of Wastepaper(Ⅷ)-Contamination of Process WAter by System Closure)

  • 여성국;류정용;신종호;송봉근;오세균
    • 펄프종이기술
    • /
    • 제31권4호
    • /
    • pp.1-7
    • /
    • 1999
  • This study was carried out to simulate the change of various properties of recycled water when zero-discharge system was applied to a KOCC recycling process. contaminants such as chemical oxygen demand, anionic trash, and calcium hardness were gradually increased in the process water as the recycling was repeated . Especially, the increase of anionic trash and COD were closely related to the starch derived from corrugating adhesive in KOCC. Four kinds of water were compared in the preparation of handsheet to evaluate the performance of retention program. Waters used in this work were laboratory tab water, process water from Dong-II mill and the same one treated by UASB process, and closed white water prepared by KRICT. The result revealed that one the major factors fro reducing a retention power was the anioni trash accumulated in the recycled water.

  • PDF

리사이클링 횟수에 따른 일차미세섬유와 이차미세섬유의 폴리아크릴아미드 흡착특성 변화 (Effects of Recycling on Adsorption Characteristics of Cationic Polyacrylamide onto Primary and Secondary Fines)

  • 주성범;이학래
    • 펄프종이기술
    • /
    • 제31권2호
    • /
    • pp.34-41
    • /
    • 1999
  • Adsorption of cationic polyacrylamide dry strength resins onto the surface of papermaking fibers and fines is critical for their effective utilization. Since dry strength resins are frequently employed when recycled fibers containing a great deal of fines are used as a raw material, their adsorption characteristic onto the recycled fiber fines is of great importance. In this study, effects of recycling on adsorption characteristics of cationic polyacrylamide onto primary and secondary fines were examined. Never dried bleached hardwood kraft pulp was beaten and dried for recycling. In each recycling step the adsorption characteristic of a cationic PAM onto primary and secondary fines was evaluated by kjeldahl nitrogen analysis method. The influence of recycling on water retention value and carboxyl content along with the sheet density and tensile strength was examined. Secondary fines of never dried pulp adsorbed twice as much of C-PAM as the primary fines, however, the adsorption capacity of the secondary fines decreased rapidly during the course of recycling and showed lower adsorption capacily than primary fines.

  • PDF

백상지 고지의 탈묵 (Deinking of Computer Printed Out and White Ledger)

  • 한신호
    • 펄프종이기술
    • /
    • 제32권1호
    • /
    • pp.48-56
    • /
    • 2000
  • The objective of this study was to investigate the enzymatic deinking technology. Office recycled papers such as computer printed out(CPO) and white ledger(WL) were used in the evaluation of four different deinking conditions ; alkaline deinking , neutral deinking and enzymatic deinking at alkaline and neutral pH. Filltering pads were prepared after flotation deinking to measure brighteness gain and ink removal efficiency. Three different surfactants were also used in the evaluation of deinking efficiency including surface chemical properties by measuring foam height and stability, surface tension and cloud point of views. The results indicated that the neutral deinking method with enzyme and surfactant addition showed highest deinking efficiency of office recycled papers.

  • PDF

신형 탈묵용 잉크제거 분리기의 성능에 관한 연구 (A Study on the Performance of the Newly Developed De-inking Machine)

  • 김홍;강영구;한지원;박형주
    • 한국안전학회지
    • /
    • 제11권4호
    • /
    • pp.90-96
    • /
    • 1996
  • This paper examines the De-inking characteristics of mechanical methods using the newly developed De-inking machine along with experiments to enhance the manufacture of recycled kraft pulp with the addition of newspaper. This study concluded that : First, the De-Inking ratio was affected by shear stress and friction resistance operating In the stainless steel net. Second, the brightness improvement ratio was raised by 6.2% under the following conditions : 120rpm rotor speed, 2.18% concentration, using two treatment cycles. Third, it was shown that the tearing strength was improved by about 10 to 20% , and the tensile strength remained the same when recycled kraft pulp was added with 20% wasted paper. In sum, by these experiments we have proven that the performance of the newly developed De-inking machine can be improved.

  • PDF

A Review of Nanomaterials in Cement-Based Composite

  • 이무;김진만
    • 한국건설순환자원학회논문집
    • /
    • 제7권2호
    • /
    • pp.174-186
    • /
    • 2019
  • This paper reviews the development condition of nanomaterials used in concrete over years. The definitions of nanomaterial, nanotechnology, and nano-concrete are reviewed. The impacts of nanomaterials on cementitious material in the point of advantages and disadvantages are analyzed. Moreover, this paper analyzes and classifies the nanomaterials into the extra quality enhancement and modification to plain cementitious composite. Indeed, the outstanding properties of the embedded nanomaterials can be introduced to concrete such as the mechanical improvement, pore structure refinement, hydrate acceleration, and smartness modifying of self-cleaning, and/or self-sensing. Before the full potential of nanotechnology can be realized in concrete applications, various techniques have to be solved including proper dispersion, compatibility of the nanomaterials in cement, processing, manufacturing, safety, handling issues, scale-up, cost, the impact on the environment and human health.

생활쓰레기 분리수거와 재활용 활동에 관한 조사연구 (Source Separation and Citizen's Recycling Activity of Solid Waste)

  • 정재춘;이무춘
    • 유기물자원화
    • /
    • 제1권2호
    • /
    • pp.299-315
    • /
    • 1993
  • 시민들의 생활폐기물에 대한 재활용활동을 알아보기 위하여 서울시 도봉구, 시흥시, 김포군을 선정하여 발생원별로 그 실태를 조사하였다. 3개 조사지역의 재활용량은 0.02 kg/인/일 -0.10 kg/인/일 범위에 있었으며, 회수율은 폐지가 42.7%로 가장 높고, 빈병, 유리류가 10.7%, 캔류가 14.8%, 플라스틱류가 2.8%로 가장 낮았다. 수집 및 판매되는 재활용품에서는 중량비나 판매금액의 구성비에 있어서 폐지가 60% 이상으로 가장 중요한 품목이었으며, 다음이 빈병류이었다. 재활용품의 판매금액은 주택지역이나 사무지역 모두 5원/인/일 이하로 미미한 액수였다. 시민조직의 일종인 재활용추진협의회의 구성을 보면 대부분이 통 반장 중심의 조직으로 구성되어 있었고 활동은 쓰레기의 재분류작업에 한정되어 있었다. 일반적으로 시민들의 참여도와 회원들의 만족도는 낮았으며 경제적 유인동기가 낮아서 가까스로 명맥을 유지하고 있었다. 이 논문에서는 재활용 활성화방안으로 분리수거지침의 제정, 적정 인구규모별 자생적 주민조직의 활성화, 유휴노동력의 활용, 민간수거업체의 육성에 대하여 검토하였다.

  • PDF