본 연구는 석탄가스화 용융슬래그(이하 CGS)를 콘크리트용 잔골재로의 활용성을 검토하기 위한 기초 단계로 시멘트 모르타르 조건에서 CGS 치환율에 따른 특성을 평가하였는데, 그 결과를 요약하면 다음과 같다. 플로는 양호한 품질의 부순 잔골재(이하 CSa) 및 불량 입도의 부순 잔골재와 해사를 혼합한 잔골재(이하 CSb+SS) 공히 CGS 치환율이 증가할수록 증가하였으나, 공기량은 반대의 경향으로 감소하였다. 압축강도는 CGS 치환율이 증가할수록 포물선의 경향을 보였으며, 재령 28일을 기준으로 CSa를 사용한 경우는 CGS 50%, CSb+SS를 사용한 경우는 CGS 75%에서 가장 높은 강도값을 나타내었다. 휨강도는 CGS 25% 및 50%에서 최대치를 나타냈으나 전반적으로는 압축강도와 유사한 경향으로 나타났다. 상호비교로서 CSb+SS와 대비하여 CSa에서 압축강도 및 휨강도가 약 5% 정도 높게 나타났으며, CGS 사용 유무에 따라서는 CGS를 사용하였을 때 높은 강도일수록 크게 나타났다. CGS 치환율에 따른 모르타르의 품질을 종합적으로 검토한 결과, CGS를 잔골재에 50% 전후로 혼합하여 사용한다면 유동성 확보 및 강도증진에 긍정적으로 기여하여 자원 재활용 및 품질향상을 동시에 도모할 수 있을 것으로 사료된다.
본 연구에서는 동일 작업성 조건에서 저품질 잔 굵은 골재가 콘크리트의 공학적 특성에 미치는 영향을 실험적으로 분석 하고자 하였는데, 그 결과를 요약하면 다음과 같다. 먼저, 슬럼프 및 공기량을 단위수량과 AE제 혼입량 변화로 동일하게 배합설계 하였다. 따라서, 양호한 품질의 골재를 사용한 배합에 비해 저품질의 골재 사용시 불량의 입도 및 미립자량 등의 영향으로 단위수량 및 AE제 혼입량이 각각 약 18%, 98% 증가하는 경향이 나타났다. 압축강도의 경우는 양호한 품질의 부순 굵은 골재를 사용한 배합에 비해 저품질의 발파석 굵은 골재를 사용한 배합에서 특히, 발파석 마사토 및 해사와 같은 저품질 잔골재와 복합될 때 20~35% 까지 저하하는 결과를 나타내었다. 또한, 저품질 잔 굵은 골재를 사용한 콘크리트인 경우는 압축강도뿐만 아니라 탄성계수와 내구성으로 동결융해, 건조수축, 탄산화 및 염해저항성 측면에서도 크게 저하하여 그 심각이 문제시 되었다. 따라서 저품질 골재를 순환자원으로 활용하고자 할 때에는 물씻기, 혼합골재에 의한 입도 조정 등 별도의 처리를 거쳐 사용하거나 혹은 사용을 철저히 규제하는 특별한 대책이 수립 되어야 할 것으로 사료된다.
Recently, interest grew recently on the quality of aggregates following the diminution of primary resources from river and the growing construction demand which exhausted high-quality sand sources around large cities and incited the use of low grade aggregates like shore sand and sea sand that can be supplied in natural state. Especially, the environmental preservation concern and the augmentation of public grievance about the exploitation of sea sand as substitute to river sand are gradually impeding the supply. This situation aggravated by the recent interdiction to extract sea sand which resulted in sand crisis that even led once to the suspension of construction works. The lack of sea sand and river sand increased the exploitation of crushed sand which occupies now nearly 20% of the whole quantity of fine aggregates. And, the use of crushed sand may be expected to grow continuously in the future. This paper described that the properties of crushed sand and the concrete using the crushed sand, the technologies to improve quality of crushed sand and the concrete in order to provide information for the production of high-quality concrete using crushed sand.
This study was performed to evaluate the strength and durability properties of recycled concrete containing water - redispersible copolymer powder(WRP) and blast furnace slag powder(BSP) [RCWS]. Material used were cemente, recycled coarse aggregare, natural fine aggregate, water-redispersible copolymer powder, blast-furnace slag powder. Especially, Water-redispersible powder was used for blending with Inorganic binders such as cemente, gypsum and hydrated lime etc. First of all, Mixed ratio method of RCWS made Two Type. One was called type-1 which used to BSP content 5% and WRP(Water-redispersible powder) content 0%, 1%, 2%, 3%, 4%, 5%, 6%. respectively. Another was called Type-2 which used to BSP(blast furnace slag powder)content 10% and WRP(Water-redispersible powder) content 0%, 1%, 2%, 3%, 4%, 5%, 6%. respectively. According to the experimental results of (RCWS), Incase Type-2 at curing age 28days, Compressive strength, pulse velocity and dynamic modulous of elasticity were shown higher than Type-1 and The more WRP content increasing($0%{\sim}6%$) was the lower Compressive strength, Pulse velocity and Dynamic modulous of elasticity. Water absorption ratio was in the range of $3.85%\;{\sim}\;3.23%$, it was almost equal to Type-1, 2 but Increasing the WRP content($0%{\sim}6%$), The water absorption ratio is decreased.
In this study, a zero-cement brick is manufactured by replacing cement with recycled aggregates and blast furnace slag powder. Experimental tests were conducted with standard sized samples of $190{\times}57{\times}90mm$ (KS F 4004), and this manufacturing technique was simulated in practice. Results showed that the zero-cement brick with 0.35 W/B had the highest compressive strength, but the lowest absorption ratio. This absorption ratio of zero-cement brick with 0.35 W/B was lower than the required level determined by KS F 4004. Hence, to increase the absorption ratio, crushed fine aggregate (CA) and emulsified waste vegetable oil (EWO) were used in combination in the zero-cement brick. It was found that the zero-cement brick with CA of 20% and EWO of 1% had the optimum combination, in terms of having the optimum strength development (12 MPa) and the optimum absorption ratio (8.4%) that satisfies the level required by KS. In addition, it is demonstrated that for the manufacturing of zero-cement brick of 1000, this technique reduces the manufacturing cost by 5% compared with conventional cement brick.
폐목재의 활용에 관한 특허동향 분석을 위해 한국특허정보원의 특허정보검색서비스(KIPRIS)에서 관련 키워드로 한국, 미국 및 일본의 특허 검색을 실시하여 2011년 12일 31일까지 특허 등록된 한국 77건, 미국 316건 및 일본 317건의 특허 자료를 수집하였다. 수집된 자료 중 거절, 소멸, 무효, 취하, 포기 및 폐목재와 관련이 적은 내용의 특허를 제외시키고 얻은 한국특허 71건, 미국특허 216건, 일본특허 227건에 대한 분석을 실시하였다. 또한 폐목재를 콘크리트용 경량골재로 활용하기 위한 기초 연구로서 파쇄시킨 소나무 임목부산물을 No. 8(2.4 mm)체로 쳐서 이를 통과시킨 것을 $100{\pm}5^{\circ}C$에서 24시간 동안 건조시킨 다음 잔골재의 일부로서 대체 사용한 모르타르 물성 실험을 실시하였다. 목재와 시멘트를 혼합하는 경우 목재의 수종과 부위에 따라서는 시멘트의 경화를 저해하는 것으로 알려져 있기 때문에 본 연구에서는 파쇄폐목재를 $20^{\circ}C$, $50^{\circ}C$, $80^{\circ}C$ 및 $100^{\circ}C$의 수중에서 일정 시간 동안 침지시킨 후 건조시킨 다음 이를 사용한 모르타르의 물성실험을 실시하여 파쇄폐목재의 전처리 효과를 함께 고찰하였다.
본 연구의 목적은 석탄회 중 바텀애시를 이용하여 시멘트압출성형 패널에 잔골재대체재(보형성 유지)의 용도로 적용을 함으로써 산업 부산물을 처리함과 동시에 새로운 용도를 창출하기 위한 기초자료를 제시하는 것이다. 선행연구에서는 건식벽체로 사용되는 시멘트 압출성형 패널에 비정제 플라이애시를 시멘트계 재료로 대체하여, 최대 80%까지 대체가 가능하였다. 하지만, 압출성형체는 압출 직후 자중에 의해 약간의 침하가 발생을 하게 되는데, 이는 반응성이 느린 플라이애시를 대량 사용한 경우에 늦은 경화로 인한 것이다. 본 연구에서는 자중에 의한 침하에 저항하기 위한 용도로 바텀애시를 잔골재대체재로의 사용가능성과 최적사용량을 검토하였다. 그 결과 바텀애시의 대체율이 증가함에 따라 압출경화체의 압출성은 저하 되었지만 관입저항성은 증가하였다. 그러므로 기존의 자중에 의한 패널의 침하현상은 잔골재 대체재를 사용함으로써 보완이 가능하였다. 또한 바텀애시 대체율 20%, 최대 입자 크기 0.6mm, 오토클레이브 양생에서 적절한 강도특성을 발현하고 있다. 본 연구의 결과를 통해 차후 바텀애시의 활용방법이 확대되고, 바텀애시를 잔골재로 활용함으로서 부가가치 상승에 기여할 것으로 예상된다.
In this research the processing method of Desulfurized Plaster is changed to cyclotomy, 0.3mm sieve analysis and 500℃ heat exposure, and by changing the mix rate of the binding agent to 0~20%, it was applied to mortar that used cyclic aggregate and blast furnace slag for testing. The test results showed that the flow decreased in the order of cyclotomy, high heat exposure, and sieve analysis according to the mix rate of FGD, and while the air volume decreased for cyclotomy, it was shown to have almost no effect on sieve analysis and high heat exposure. The setting time accelerated as the mixing rate of FGD increased, and the compression strength increased as the mixing rate of FGD increased and especially showed a high trend with cyclotomy and sieve analysis.
Foam concrete can be considered as environmental friendly material due to its low weight, its minimal cost and a possibility to add waste materials in its production. This paper investigates the possibility of producing foam concrete with waste glass as powder and aggregate. Then, the effect of using waste glass on strength and drying shrinkage of foam concrete was examined. Also, the effect of incorporating polypropylene fibers (12 mm length and proportion of 0.5% of a mix volume) on distribution of waste glass as coarse particles within 1200 kg/m3 foam concrete mixes was evaluated. Waste glass was used as powder (20% of cement weight), as coarse particles (25%, 50% and 100% instead of sand volume) and as fine particles (25% instead of sand volume). From the results, the problem of non-uniform distribution of coarse glass particles was successfully solved by adding polypropylene fibers. It was found that using of waste glass as coarse aggregate led to reduce the strength of foam concrete mixes. However, using it with polypropylene fibers in combination helped in increasing the strength by about 29- 50% for compressive and 55- 71% for splitting tensile and reducing the drying shrinkage by about (31- 40%). In general, not only the fibers role but also the uniformly distributed coarse glass particles helped in improving and enhancing the strength and shrinkage of the investigated foam concrete mixes.
최근 들어 건축구조물은 초고층화 및 대규모화 하는 경향에 있으며, 콘크리트 기술의 발달로 인하여 철근콘크리트 구조로 초고층 건축물을 축조하는 것이 일반화 되어 가고 있는 실정이다. 초고층 건축물에 적용되는 철근콘크리트주조는 고유동·고강도 콘크리트가 적용되기 때문에 시공성이 향상되고 단면축소가 가능하게 되었다. 또한 철근콘크리트구조의 초고층 건축물에는 슬라이딩폼, ACS(Auto Climbing Form) 등 시스템 거푸집을 적용하기 때문에 시공의 신속성을 기할 수 있으며, 철골구조보다 저렴한 가격에 내화·내진 등 우수한 품질로 빠른 시일 내에 완성할 수 있게 되었다. 그러나 초고층 건축물을 철근콘크리트 구조로 시공할 경우는 자중이 커지게 된다는 단점을 가지게 된다. 이러한 단점을 보완하고자 개발된 것이 경량골재(LWA, Low Weight Aggregate)이며, 최근까지 다양한 종류의 경량골재가 개발되어지고 있다. 이러한 경량골재를 이용하여 콘크리트를 제조하면 철근콘크리트 구조물의 자중을 줄일 수 있다는 장점을 가지게 되지만, 콘크리트의 강도가 줄어든다는 단점을 가진다. 이는 경량골재가 일반적인 천연골재에 비하여 낮은 강도를 가지고 있기 때문으로 최근에는 이러한 경량골재의 취약점을 보완하기 위한 연구가 진행되고 있다. 본 연구에서는 경량골재 표면코팅 유무에 따른 시멘트 경화체의 강도특성을 알아보기 위한 실험적 연구를 진행하였다. 그 결과, 압축강도는 표면코팅 한 경량골재가 코팅하지 않은 경량골재보다 높은 강도발현을 나타냈으며, 물/시멘트 비 50 %에서 표면코팅 경량골재가 높은 압축강도를 발현하는 것을 알 수 있었다. 이는 표면코팅 경량골재 혼입 시멘트 경화체의 계면 공극이 고로슬래그 미분말 입자로 메워졌기 때문인 것으로 확인되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.