• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1992.10a
• /
• pp.2-29
• /
• 1992

According to the increase of occupation density of microwave frequency band on use microwave environments have been congested extensively. For shielding unnecessary electromagnetic wave of preventing the electromagnetic wave reflection a good conductor a low resistive material or a lossy material is mainly used. As a method to measure the absorbing characteristics of microwave absorber the fundamental microwave measuring method can be used. There is however a big problem in measuring errors since the wavelength of microwave is very short especially as in the case as microwave absorber for RADAR. Therefore this research aimed to a converting adaptor of 20mm${\Phi}$ coaxial tube from a Type-N connector to 20mm${\Phi}$ coaxial tube and to use it for designing microwave absorber and evaluating absorbing characteristics. Furthermore the measurements of absorbing characteristics and material constants have performed and reviewed which were carried out by using the coaxial tube in the short type and by using rectangular waveguide respectively As a result the validity of the measured values have been confirmed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.4
• /
• pp.321-328
• /
• 1989

The propagation characteristics of dielectric waveguides has been analyzed by finite element method. We have proposed the finite element formutation of the variational expression in the three-component magnetic field based on Galerkin's method which seek for the propagation constant by a given value of frequency. In this approach, the divergence relation for H is satisfied and spurious modes does not appear and finite element solustions agree with the exact solutions. In order to varify the validity of the present method the numerical results for a rectangular waveguide partilly filled with dielectric are compared with other results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.777-785
• /
• 1999

For an efficient calculation of scattering matrix in mode matching techniques, mode combination has been studied in this paper. A conducting post in rectangular waveguide, which is most commonly utilized in the combline filter structure, is adopted and its scattering matrix is derived. We eliminates the TE and TM modes having little influence on result, which results in the different number of TE and TM modes in each discontinuous region.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.6 no.1
• /
• pp.12-18
• /
• 1969

The characteristics of microwave reflection in the media of cold gaseous plasma is analysed to various external magnetic flux density. The DC discharge plasma is generated in the rectangular waveguide which contains two electrodes and helium gas at the pressure of 10-2mm Hg. The reflected and transmitted power of microwave is measured when the electric field is parallel to, and perpendicular to the external magnetic field. It shows that the reflected power is increased as the magnetic flux density is increased in the parallel case, but the maximum value of the reflected power is occured at the cyclotron resonance (3120 Gauss) in the perpendicular case.

• Journal of electromagnetic engineering and science
• /
• v.13 no.4
• /
• pp.214-223
• /
• 2013

This paper proposes a theoretical analysis of hidden device detection and a design of multiband circular polarization patch array antenna for non-linear junction detector system application. A good axial ratio of circular polarization patch antenna is realized by a new approach that employs inclined slots, two rectangular grooves and a truncated ground for the conventional antenna. A good axial ratio of the 1.5 dB lower is measured by having an asymmetric gap distance between the ground planes of the coplanar waveguide feeding structure. The common ground plane of the linear array has an optimum trapezoidal slot array to reduce the mutual coupling without increasing the distance between the radiators. The higher gain of about 1 dBi is realized by using the novel common ground structure. The measured return loss, gain, and axial ratio of the proposed single radiator, as well as the proposed array antennas, showed a good agreement with the simulated results.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.4
• /
• pp.11-19
• /
• 1993

The complex permittivity and the linewidth of microwave ferrites are measured using the well known cavity perturbation method. The cavity perturbation method has been widely used for the measurement of complex permittivity and conductivity of low loss magnetic and dielectric materials at microwave frequencies. TT1-2000, TT73-2200, and G-113 samples ordered from Trans-Tech Inc, are tested. TE$_{103}$ and TE$_{106}$ rectangular waveguide cavities are fabricated and the ferrite sample of cylidrical rod and sphere shapes are prepared. The error between the measurement values and the supplier's data is less than 1 percent in case of $\varepsilon$’ and about 10 percent in case of linewidth ($\Delta$H). Worst case error analysis shows that our measured results are well within the error bound calculated from the accuracy specification of the measuring instruments.

• Journal of the Korean Institute of Navigation
• /
• v.16 no.4
• /
• pp.25-34
• /
• 1992

As a method of measure the absorbing characteristics of microwave absorber, the various microwave measuring method can be used fundamentally. There is, however, a big problem in measuring errors, since the wavelength of microwave such as used for radar is very short. Therefore, this research aimed to design and fabricate a converting adaptor of $20mm^{\phi}$ coaxial tube from a Type-N connector to $20mm^{\phi}$ coaxial tube and to use it for evaluating absorption characteristics of microwave absorber. Furthermore, the measurements of absorbing characteristics and material constants have been performed and review, which were carried out by using the coaxial tube and by using rectangular waveguide, respective. As a result, the validity of the proposed measuring method has been confirmed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.4 no.3
• /
• pp.9-18
• /
• 1967

Analytic results, valid at resonance, for the admittance properties of an edge shunt slot on the narrow wall of rectangular waveguide have been derived by the use of electromagnetic field equations. Furthermore, additional formulas for the reflection, transmission coefficient and voltage amplitude generated by given incident wave are described. Finally, the measured results are compared with the theoretical values. It was found that the measured results were consistent with the theoretical results. Also the errors between computed and measured data are described.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.33-36
• /
• 2000

KrF excimer laser, which is useful for fabrication of fiber gratings, was irradiated on the PLC-type WDM directional coupler and the transmission wavelength shift was observed as a function of UV exposure time. The effective refractive index change of rectangular silica waveguide was calculated from the wavelength shift measurement and the coupled mode theory. heory.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.736-742
• /
• 2003

This paper presents the propagation path loss in a tunnel which is a kinds of underground environments. To predict propagation path loss more accurately, we choose a straight tunnel with rectangular cross-section. The simulated receiver powers that are using a hybrid waveguide model and a Ray-Tracing method, are compared with the measured ones as a function of distance between TX and RX antennas in tunnel. The attenuation value of regression analysis for measured power in the tunnel is 0.0238dB/m which is similar to the one of the EH1.2 mode, 0.0246dB/m in hybrid waveguide model. By comparing simulation with measurement in tunnels, it has been shown that the measured values are approximate to the simulated results of ray-tracing model. In the analysis of wide-band channel characteristics of the tunnel, the more the distance between TX and RX antennas in tunnel increases, RMS delay spread increases and coherence bandwidth decreases.