• 한국CDE학회논문집
• /
• 제17권1호
• /
• pp.54-61
• /
• 2012

In this paper, we performed numerical analysis to improve the heat exchange efficiency of wasted heat recovery ventilator which has a delivery and a exhaustion fan. One of the most important design factors that affect the efficiency of heat exchange is uniform counter-flow between inbound and outbound air flows. We had simulated several types of porous plates which were installed at air intake area. With plate having 45 degrees of installation angle and 15 mm diameter holes which are uniformly arranged, we can generate a uniform air flows at the area of porous media where inbound and outbound air flows are cross over. In addition, we installed a duct to reduce vortex flows at the outlet and to discharge exhaust airs rapidly. By using the proposed numerical assessment, we expect the improvement of the heat exchange efficiency of ventilator.

• 전자공학회논문지A
• /
• 제30A권11호
• /
• pp.1-10
• /
• 1993

A Study on New Digital In this paper, we propose a new Angular Form Carrier Recovery Loop(AFCR loop) for PSK modulation technique. AF CR loop includes detected angle symbol and Multi Level Hardlimiter. Using zero crossing DPLL, we model 1st 2nd AF CR loop, and also derive SCurve. In order to prove steady state operation of AF CR loop, we evaluate performance of this loop by Monte-Carlo and analytical simulation method. We also compare the performance of AF CR loop to that of other loop in terms of acquisition, S-Curve, and RMS jitter. From the comparison result, we verify that the performance of AF CR loop operates well in steady state.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.541-551
• /
• 2009

Configuration of the inlet transition square duct (hereinafter referred to as "transition duct") for heat recovery steam generator (hereinafter referred to as "HRSG") in combined cycle power plant is limited by the construction type of HRSG and plant site condition. The main purpose of the present study is to analyze the effect of a variation in turbulent flow pattern by roof slop angle change of transition duct for horizontal HRSG, which is influencing heat flux in heat transfer structure to the finned tube bank. In this study, a computational fluid dynamics(CFD) is applied to predict turbulent flow pattern and comparisons are made to 1/12th scale cold model test data for verification. Re-normalization group theory (RNG) based k-$\epsilon$ turbulent model, which improves the accuracy for rapidly strained flow and swirling flow in comparison with standard k-$\epsilon$ model, is used for the results cited in this study. To reduce the amount of computer resources required for modeling the finned tube bank, a porous media model is used.

• 한국의류학회지
• /
• 제22권7호
• /
• pp.862-871
• /
• 1998

In this study, the effect of sizing on the physical and mechanical characteristics of Hansan ramie was studied. 2 kinds of Hansan ramie were used for this study and one kind of the chinese ramie was also used for comparing with the characteristics of Hansan ramies. The following results were obtained from this experimental study. The wrinkle recovery angle was gradually reduced according to the increasing of the concentration of sizing agent. As the size agent could easily penetrate between the thick yarms, the effect of sizing on the wrinkle recovery angle was evident on the Chinese and Hansan coarse ramie. The result of KES-F system showed that the sizing affected much on the bending properties and shear properties. As the size concentration was increased the shear properties were increased more evidently on the Chinese and Hansan coarse ramie. The result of KES-F system showed that the sizing affected much on the bending properties and shear properties. As the size concentration was increased the shear properties were increased more evidently than the bending properties. The other mechanical properties didn't changed much by sizing. The calculated primary hand value also showed that the ramie became more stiff after sizing.

• The Journal of Korean Physical Therapy
• /
• 제26권4호
• /
• pp.240-248
• /
• 2014

Purpose: The purpose of study was to determine the effects of muscle reeducation training in patients with acute facial nerve paralysis. Methods: Thirty patients were randomly assigned to either the experimental group (n=15) or the control group (n=15). The experimental group received muscle reeducation training for 20 minutes after electrotherapy and the control group received conventional electrotherapy for only 40 minutes. Therapeutic intervention for each group was performed four times per week for four weeks. The patients were measured for recovery of paralysis using the House-Brackmann Grading System (H-B grade), the Movement Distance of Mouth, Nasolabial Angle (NA), and Facial Disability Index (FDI). Results: In within group comparison, the experimental group showed significant improvements for all variables (p<0.01). In comparison between two groups, the experimental group showed relatively greater significant improvements for all variables (p<0.01). Conclusion: These findings suggest that muscle reeducation training is more effective than conventional therapy in improving the condition of patients with facial nerve paralysis. In particular, the results of this study indicate that muscle reeducation training can be recommended by clinicians since it provides more benefits.

• 한국추진공학회지
• /
• 제6권2호
• /
• pp.65-74
• /
• 2002

전압력 회복율을 최대로 하기 위한 IRR형 램젯 공기 흡입구 초음속 확산부의 최적형상 설계를 수행하였다. 질량유량을 제약조건으로 고려하고 외부램프에서의 두 번째 경사충격파와 카울립 형상, 그리고 흡입구 목의 단면적을 설계변수로 선택하였다. 효율적인 최적화를 위해 설계변수 변환을 통한 개선된 반응면 기법을 사용하였으며 설계반복을 통해 높은 신뢰도의 반응면을 구성할 수 있었다. 최적화 기법으로 유전자 알고리즘을 사용하였으며, 이차원 Euler Code를 사용하여 공력해석을 수행하였다. 배압조건의 적용을 위해 흡입구 목 뒤로 가상의 노즐을 장착하였고 총 20회의 계산으로 종말충격파 이후의 전압력 회복율이 기준형상에 비하여 14% 향상된 초음속 확산부 최적형상을 설계할 수 있었다.

• 한국통신학회논문지
• /
• 제17권11호
• /
• pp.1299-1310
• /
• 1992

최근에, 디지탈 데이터 전송을 위한 수신기 타이밍 검출 회로의 디지탈화에 관한 관심이 점점 증가하고 있다. 타이밍 검출 회로의 디지탈화의 결과로 인하여, 타이밍 에러 검출을 위한 새로운 디지탈 알고리즘이 필요하게 된다. 본 논문에서는, 직접 QPSK변조 기법에 적용할 수 있는 Angular Form(AF) Algorithm을 제시하였다. AF Algorithm은 기본적으로 복조된 각 (Detected Angle)과 천이논리표 (Transition Logic Table)등의 개념을 근거로 하여 개발되었다. Gaussian과 Impulsive 잡음을 모델링하여, 이들 두 잡음환경하에서 Monte-Carlo 시뮬레이션을 통하여 알고리즘 성능평가를 하였다. 성능평가 결과, AF Algorithm이 Gardner Algorithm보다 BER, RMS Jitter, S-curve등에서 성능이 개선됨을 알 수 있었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권3호
• /
• pp.293-299
• /
• 2008

Bite force is created by the force of adjacent teeth accompanied with tension of masticatory muscle. The bite force value is greater in male than in female and ha maximum value at first molar. Masseter muscle is associated with bite force and during muscle contraction the electric signal is expressed in EMG form. The aim of the study is to assess recovery time for masseter muscle activity and according to each part of bite force after open reduction with internal fixation when mandibular angle fracture and subcondyle fracture occurred. And to determine the appropriate period for mandibular fracture patients to have normal masticatory activity. 30 patients with normal bite condition was selected for control group and from April, 2007 to September, 2007, 20 patients who visited our department of oral and maxillofacial surgery of Dankook University, were selected for the study and were diagnosed as mandibular angle fracture and subcondyle fracture. For control group, the bite force for incisors, canine, premolars and molars and activity of the masseter muscle was measured and compared for 1, 2, 3, 4, 6 and 8 weeks. That was divided as fracture side and normal side. Mann-Whitney U test was performed for significant difference and the following result was obtained. 1. The maximum voluntary bite force for incisors, canine, premolars and molars portion were 0.113 kN, 0.182kN, 0.295kN and 0.486kN and the masseter muscle activity was 0.192 volts in the control group. 2. The maximum bite force at fracture side was recovered by 4th weeks for incisors, 6th weeks for canine and premolars and 8th weeks for molars and the masseter muscle activity was recovered by 6th weeks in the experimental group. 2. The maximum bite force at normal side was recovered by 4th weeks for incisors, 6th weeks for canine, premolars and molars and the masseter muscle activity was recovered by 3rd weeks in the experimental group. 3. The method for internal fixation by 2.0mm miniplates at both superior and inferior border had no complications according for twenty patients and had a satisfactory recovery. According to the result, patient with mandibular angle fracture and subcondyle fracture, 8 weeks was required for bite force recovery. Therefore, patients with open reduction and internal fixation under general anesthesis, it can be assumed that 8 weeks was needed after operation in order to have normal bite force and masseter muscle recovery.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.6-8
• /
• 2001

This report describes the effect of the blending of poly(trifluoropropylmethylvinylsiloxane) (PTFPMVS) with poly(dimethylsiloxane) (PDMS) on the surface properties such as water repellency using dynamic contact angle (DCA) measurement. We have investigated the surface molecular mobility of the PDMS/PTFPMVS blends via a DCA measurement and an adhesion tension relaxation. It could be shown that a flexible side-chain segment in PTFPMVS having higher surface energy, could be reoriented easily in water to decrease the interfacial tension of the polymer/water interface, which seems to play a major role at the decrease of the receding contact angle and the surface resistivity of PDMS/PTFPMVS blends.

• 제어로봇시스템학회논문지
• /
• 제10권5호
• /
• pp.415-420
• /
• 2004

We present a new algorithm for the calibration of a camera and the recovery of 3D scene structure up to a scale from image sequences using known angles between lines in the scene. Traditional method for calibration using scene constraints requires various scene constraints due to the stratified approach. Proposed method requires only one type of scene constraint of known angle and also it directly recovers metric structure up to an unknown scale from projective structure. Specifically, we recover the matrix that is the homography between the projective structure and the Euclidean structure using angles. Since this matrix is a unique one in the given set of image sequences, we can easily deal with the problem of varying intrinsic parameters of the camera. Experimental results on the synthetic and real images demonstrate the feasibility of the proposed algorithm.