• 한국군사과학기술학회지
• /
• 제24권5호
• /
• pp.527-536
• /
• 2021

In wireless environments, wideband receivers are used in a communication intelligent system to detect unknown signals and obtain azimuth information. To design a wideband receiver that performs multiple signal detection and direction finding simultaneously, it is necessary to consider a reception structure composed of multiple channels. In this paper, we propose a wideband multi-channel receiver for direction finding of unknown wideband communication signals including frequency hopping signals. A signal processing method for detecting received signals and estimating azimuth information is presented, and components of the manufactured wideband receiver are described. In addition, test results of the signal detection performance by mounting the proposed wideband multi-channel receiver on the flight system are included.

• 한국군사과학기술학회지
• /
• 제23권1호
• /
• pp.52-58
• /
• 2020

In this paper, a 2-dimensional phase comparison direction finding receiver was designed and fabricated. For 2-D comparison direction finding, direction finding formulas were derived from a uniformly arranged of four antennas. Based on this, a direction finding receiver was designed using Matlab simulink, and the direction finding receiver was fabricated. To analyze the performance of the designed direction finding receiver, the injection direction finding accuracy and simulation results were compared. As a result of the test, the fabricated direction finding receiver showed a maximum of 3° RMS precision, and the result of both tests showed similar trends. Also, it was confirmed that the direction finding accuracy of elevation angle is about 2.7 times better than azimuth angle, and both models performed well within 0.7° RMS at the boresight.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1388-1391
• /
• 1996

This paper presents the structure and functions of the differential beacon receiver for receiving DGPS error correction data. The differential beacon receiver is designed using commercially available components. Its functions are being implemented and tested in laboratory. Filed test is scheduled for the end of this year.

• 천문학회보
• /
• 제40권1호
• /
• pp.51.1-51.1
• /
• 2015

Over several decades, a historical review of receiver development for radio astronomy in Korea such TRAO, SRAO and KVN will be presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.35-38
• /
• 2005

In this study, S-Band receiver for low orbit satellite is implemented. The developed receiver is double super-heterodyne type and STDN compatible. Input/output frequency of receiver is 2034.747MHz and 18.414MHz used for KOMPSAT 2 satellite. Overall gain(@AGC=0V) and image rejection were 92.4dB and 50.2dB respectively. It was verified that receiver has stable performance to the temperature limit, power supply voltage variation and input signal level range.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1376-1379
• /
• 1996

In this paper a GPS receiver is developed using commercial chipsets. GP2010 RF front end and GP2021 Multi-channel correlator of GEC PLESSY are adapted in designing the receiver hardware. MC 68340 is used for controlling the correlator GP2021 and implementing the navigation processing. Also presented are some test results of the developed receiver whose software has an interrupt driven structure rather than common real-time kernel based structure.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.48-56
• /
• 2004

This paper presents the GPS receiver's inherent interference effectiveness based on the receiver's internal processing gain. This research is to verify the weakness of the GPS satellite signals and evaluate the receiver's vulnerability in an interference situation. The experiment for the narrow band interference effectiveness for the L1 C/A code GPS receiver has been performed by using the Spirent GSS4765 jamming simulator. After analyzing the experimental result, it is compared with the calculated J/S value of the two different L1 C/A code GPS receivers. By the above result, the narrowband jamming effectiveness of the each jamming source and the jamming margin for the each receiver are to be analyzed in detail. Finally, we could utilize the result to analyze the jamming effectiveness on the GNSS receiver.

• Journal of Astronomy and Space Sciences
• /
• 제21권1호
• /
• pp.29-38
• /
• 2004

VLBI(Very Long Baseline Interferometer)에서 요구되는 고위상 안정도를 갖는 국부발진기를 사용하여 초저잡음 Q-band우주 전파 수신기를 개발하였다. 냉각용 HEMT 중폭기를 사용하여, 관측 주파수 범위인 420㎓에서 44㎓까지의 대역폭에서는 65K정도의 수신기 잡음 온도를 얻었으며, 390㎓ -46㎓의 대역폭에서는 l00k 이하의 잡음 온도를 얻었다. SiO분자선 관측이 주된 목적이며, 이 대역에서 얻어진 수신기 잡음온도는 독일$.$일본 전파천문대에서 개발된 수신기보다 우수한 성능을 나타낸다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.280-287
• /
• 2006

Advent of the new European satellite positioning system, Galileo will result in development of new satellite receivers such as, GPS/Galileo dual mode receiver. Furthermore, a new GNSS satellite receiver would be required to be self-reconfigured to certain navigational environments like, indoor, high interference, integrity, etc. In this paper, design and implementation issue of a FPGA based flexible GNSS receiver which gets navigation solution using L1 band signals of GPS and Galileo simultaneously is addressed.

• Journal of electromagnetic engineering and science
• /
• 제6권2호
• /
• pp.110-116
• /
• 2006

A reflective array type surface acoustic wave(SAW) dispersive delay line(DDL) with high time-bandwidth at the V/UHF-band is designed and fabricated for compressive receiver applications. This type of the SAW DDL has the properties of the relative bandwidth of 20 %, the time delay of 49.89 usec, the insertion loss of 38.5 dB and the side lobe rejection of 39 dB. In comparison with a commercial SAW DDL, the insertion loss, amplitude ripple and side lobe rejection are improved by $1.5dB{\pm}0.6dB$ and 4 dB respectively. Using the fabricated SAW DDL, the prototype of the compressive receiver is developed. It is composed of RF converter, fast tunable LO, chirp LO, A/D converter, signal processing unit and control unit. This prototype system shows a fine frequency resolution of below 30 kHz with high scan rate.