• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.113.3-113
• /
• 2001

In this paper, we have designed the VHDL module of DS/SS QPSK wireless modem processor for digital data communication. The spread spectrum method is used for modern processor, because this method guarantees good frequency efficiency and higher security. Also, it guarantees good performance in digital communication system under multi-path interferences. The differential encoder and decoder are used for simple circuit composition in the signal detection. For the synchronization of receiver, matched filter and power detector are used. And the IF modulation/demodulation of QPSK method is used in the digital level. The transmitter of VHDL modem processor consists of differential encoder, PN code generator, and QPSK ...

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.903-908
• /
• 2005

Existing ATC/ATO/TWC system has a ATC(Automatic Train Control) antenna for receiving the speed code, a ATO(Automatic Train Operation) antenna for obtaining the exact distance to go to platform and TWC(Train and Wayside Communication) antenna for communication between on-board and wayside system. This paper proposes the ATO/TWC antenna with tele-powering module, telegram transmitter/receiver module. This antenna communicates with a passive type tag(wayside Precision Stop Marker) for the information of distance from the stop position and a active type tag for the door command and status in the platform.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.305-308
• /
• 2001

In this paper, we realized a transceiver system for short distance communication with a commercial RF module working in ISM band and a microprocessor. Also we measured system performance by transmitting baseband data in a building and then we compared the demodulated 긴ta bits with stored data bits in a PC connected with demodulator. The RF module in the experiments works oかy in the bandwidth, 424MHz - 429MHz. with FM mode. The signal level degrades as the distance between transmitter and receiver increases we measured the signal level and bit error in the building of engineering college of our university. we present the measured data with various locations in the building. and the data may be used in design short distance network in a building.

• Journal of Industrial Technology
• /
• v.34
• /
• pp.27-32
• /
• 2014

Infrared remote controllers are widely used in controlling electronic devices due to its simplicity and convenience. This paper presents a smart phone application unifying any infrared remote controllers. We can select a device from device list menu of the application. Any new device can be added easily by downloading the protocol file of the device from protocol file server. Remote controller protocol files are stored in audio file format, and the file related to a specific menu button is transmitted through the audio jack of smart phones. The protocol file server is a standard file server, and protocol files for various devices are collected by infrared receiver module. For smart phones without infrared facility, a small infrared module translating audio signal to infrared signal is applied.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.33-35
• /
• 2006

We studied the prototypal developments of Plastic Cortex Stimulator (PCS) for stroke patients. The PC sends the stimulation parameters (amplitude, pulse width, cycle, etc.) to the transmitter ZigBee module through serial port. The receiver ZigBee module generates stimulation waveform. The generated output can be controlled by the PC program. Further study can be expanded to portable handset such as PDA using ZigBee. The wireless control of PCS with the handset can help the tele-rehabilitation.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.135-136
• /
• 2007

2.45 GHz RF Transceiver composed RF module and Digital module for USN(Ubiquitous Sensor Network) has been implemented in this paper. The proposed RF system is designed based on IEEE 802.15.4-2006 PHY standard which has a frequency range from $2.4{\sim}2.4835GHz$. In this transmitter chain, the output power is controlled form 0 to 30 dBm. In this receiver chain, less than 20 dB of NF was obtained.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.1-5
• /
• 2002

본 논문에서는 UART(Universal Asynchronous Receiver-Transmitter)를 soft IP(Intellectual Property) 모듈 형태로써 VLSI 설계과정을 통하여 구현하였다. 이 모듈은 현재 각종 통신 디바이스에서 최하 말단에서 직렬 데이터를 시스템으로 받아들이거나 병렬 데이터를 직렬 라인에 실어 보내는 중요한 역할을 담당한다. 본 연구에서 설계한 UART는 간단한 모듈 형태로 제작되어 있어 Verilog-HDL을 사용하여 직렬 송ㆍ수신을 필요로 하는 시스템에 내장되어 사용될 수 있다. 본 논문에서는 설계 순서에 따라 UART를 설계하고 Simulation을 하고 Synopsys Tool을 사용하여 Compile 과 Synthesis 후 Gate Area 와 Belay를 검출해 내었다. 합성결과 0.25$\mu$m 공정의 CMOS Cell Library를 사용하였을 경우 전체 면적은 1,013 gate가 나왔다. 본 논문에서 설계한 UART의 최장경로가 최대 4.12ns로 나타났으며, 최대 동작 클럭 주파수는 200MHz 로써 150Mbps 이상의 전송 속도를 가진다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.139-140
• /
• 2010

This paper presents an indoor prototype for wireless digital signal transmission using Visible Light Communications (VLC) in which high power Light Emitting Diode (LED) is used. Using low cost and off-the-shelf components, the transmitter module is constructed using an AVR Atmega128 microcontroller and commercial white beam LEDs. Modulating the light intensity of the LED enables digital signals to be transmitted across the optical link. The receiver module employs a high speed PIN photodetector for optical signal detection and a recovery circuit for optical-electro signal conversion. By sending digitalized data via VLC technology, many applications can be realized in the areas of consumer advertising, traffic safety information and disaster control.

• Journal of information and communication convergence engineering
• /
• v.18 no.4
• /
• pp.254-259
• /
• 2020

Phased-array antennas comprise a demanding antenna design methodology for commercial wireless communication systems or military radar systems. In addition to these two important applications, the phased-array antennas can be used in beamforming for wireless charging. In this study, a four-way analog beamforming front-end module (FEM) for a hybrid beamforming system is developed for 2.4 GHz operation. In a hybrid beamforming scheme, an analog beamforming FEM in which the phase and amplitude of RF signal can be adjusted between the RF chain and phased-array antenna is required. With the beamforming and beam steering capability of the phased-array antennas, wireless RF power can be transmitted with high directivity to a designated receiver for wireless charging. The four-way analog beamforming FEM has a 32 dB gain dynamic range and a phase shifting range greater than 360°. The maximum output RF power of the four-way analog beamforming FEM is 40 dBm (=10 W) when combined the four individual RF paths are combined.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.2
• /
• pp.186-193
• /
• 2006

This paper proposes a DGPS (Differential GPS) mobile reference station. The proposed systems can provide user with real-time correction data when the internet connention is possible. Since the GPS receiver part and network hardware are designed in a module, it can be easily moved and fixed. In order to verify the proposed system, several tersts have been carried out and the test results show the validity of the proposed system.