• 천문학논총
• /
• 제28권1호
• /
• pp.7-13
• /
• 2013

We present a multi-dimensional reduction method of the surveyed cube database obtained using a single- dish radio telescope in Taeduk Radio Astronomy Observatory (TRAO). The multibeam receiver system installed at the 14 m telescope in TRAO was not optimized at the initial stage, though it became more stabilized in the following season. We conducted a Galactic Plane survey using the multibeam receiver system. We show that the noise level of the first part of the survey was higher than expected, and a special reduction process seemed to be definitely required. Along with a brief review of classical methods, a multi-dimensional method of reduction is introduced; It is found that the 'background' task within IRAF (Image Reduction and Analysis Facility) can be applied to all three directions of the cube database. Various statistics of reduction results is tested using several IRAF tasks. The rms value of raw survey data is 0.241 K, and after primitive baseline subtraction and elimination of bad channel sections, the rms value turned out to be 0.210 K. After the one-dimensional reduction using 'background' task, the rms value is estimated to be 0.176 K. The average rms of the final reduced image is 0.137 K. Thus, the image quality is found to be improved about 43% using the new reduction method.

• 한국음향학회지
• /
• 제19권4호
• /
• pp.52-57
• /
• 2000

본 논문에서는 CS-ACELP와 호환성을 갖는 광대역 음성 부호화기를 설계하였다. 16㎑로 샘플링된 광대역 음성신호는 QMF 필터와 Decimation에 의하여 두 개의 협대역 음성신호로 나누어진다. 나누어진 두 개의 협대역 음성신호는 CS-ACELP와 ATC(Adaptive Transform Coding) 방법으로 각각 부호화되어 전송된다. 두 대역으로부터 부호화된 정보는 16 Kbps의 전송률을 갖고, 수신단에서는 각 대역을 CS-ACELP와 ATC 방법으로 역 부호화하여 음성신호를 합성한다. 설계된 광대역 음성부호화기의 성능을 평가하기 위하여 ITU-T의 표준안인 G.722를 포함하여 MOS 시험을 하였다.

• 융합신호처리학회논문지
• /
• 제15권4호
• /
• pp.169-175
• /
• 2014

NG-SDH 시스템은 광케이블 통하여 연결된 네트워크이다. 네트워크 동기제어기는 광전송시스템에서 데이터 동기에서 필수적이다. 본 논문에서 SOPC(system on a programmable chip) 설계 기술을 활용하여 네트워크 동기제어기를 설계한다. 설계를 위해 Altera사의 FPGA를 활용하고, FPGA안에는 32Bit CPU, DPRAM(dual port ram), 디지털 입출력포트, 송신 및 수신 프레이머, 위상차 검출기 등이 포함되어있다. 설계된 네트워크 동기제어기는 ITU-T G. 813에서 권고하는 동기기준(일시적인 응답에서의 MTIE, 원더 특성시 MTIE 및 TDEV, Holdover시 MTIE)을 만족함을 확인할 수 있다.

• ETRI Journal
• /
• 제35권2호
• /
• pp.245-252
• /
• 2013

In this work, we study the physical layer solutions for 10-gigabit-capable passive optical networks (PONs), particularly for an optical link terminal (OLT) including a 10-Gbit/s electroabsorption modulated laser (EML) and a 2.5-Gbit/s burst mode receiver (BM-Rx) in a novel bidirectional optical subassembly (BOSA). As unique features, a bidirectional mini-flat package and a 9-pin TO package are developed for a 10-gigabit-capable PON OLT BOSA composed of a 1,577-nm EML and a 1,270-nm avalanche photodiode BM-Rx, including a single-chip burst mode integrated circuit that is integrated with a transimpedance and limiting amplifier. In the developed prototype, the 10-Gbit/s transmitter and 2.5-Gbit/s receiver characteristics are evaluated and compared with the physical media dependent (PMD) specifications in ITU-T G.987.2 for XG-PON1. By conducting the 10-Gbit/s downstream and 2.5-Gbit/s upstream transmission experiments, we verify that the developed 10-gigabitcapable PON PMD prototype can operate for extended network coverage of up to a 40-km fiber reach.

• 전자통신동향분석
• /
• 제34권5호
• /
• pp.81-90
• /
• 2019

The data rate for transmission through fiber-optic cables has increased to 400 Gbps in single-wavelength channels. However, speeds up to 1 Tbps are required now to meet the ever-increasing bandwidth demand driven by the diverse requirements of contemporary applications for high-quality on-demand video streaming, cloud services, various social media, and emerging 5G-enabled applications. Because the data rates of the per-channel optical interfaces depend strongly on the operational speed of the optoelectronic devices used in optical transceivers, ultrahigh-speed photonic devices and components, and eventually, chip-level transmitter and receiver technologies, are essentially required to realize futuristic optical transceivers with data rates of 1 Tbps and beyond. In this paper, we review the recent progress achieved in high-speed optoelectronic devices, such as laser diodes, optical modulators, photodiodes, and the transmitter-receiver optical subassembly for optical transceivers in data centers and in metro/long-haul transmission.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권6호
• /
• pp.2697-2710
• /
• 2018

Owing to the development of Internet of Things (IoT), the fifth-generation (5G) wireless communication is going to foresee a substantial increase of mobile traffic demand. Energy efficiency and spectral efficiency are the challenges in a 5G network. Non-orthogonal multiple access (NOMA) is a promising technique to increase the system efficiency by adaptive power control (PC) in a 5G network. This paper proposes an efficient PC scheme based on evolutionary game theory (EGT) model for uplink power-domain NOMA system. The proposed PC scheme allows users to adaptively adjusts their transmit power level in order to improve their payoffs or throughput which results in an increase of the system efficiency. In order to separate the user signals, a successive interference cancellation (SIC) receiver installed at the base station (BS) site. The simulation results demonstrate that the proposed EGT-based PC scheme outperforms the traditional game theory-based PC schemes and orthogonal multiple access (OMA) in terms of energy efficiency and spectral efficiency.

• 한국통신학회논문지
• /
• 제30권9C호
• /
• pp.877-886
• /
• 2005

Various frame recovery algorithms have been suggested to overcome the communication quality degradation problem due to Internet-typical impairments on Voice over IP(VoIP) communications. In this paper, we propose a new receiver-based recovery method which is able to enhance recovered speech quality with almost free computational cost and without an additional increment of delay and bandwidth consumption. Most conventional recovery algorithms try to recover the lost or erroneous speech frames by reconstructing missing coefficients or speech signal during speech decoding process. Thus they eventually need to modify the decoder software. The proposed frame recovery algorithm tries to reconstruct the missing frame itself, and does not require the computational burden of modifying the decoder. In the proposed scheme, the Vector Quantization(VQ) codebook indices of the erased frame are directly estimated by referring the pre-computed VQ Codebook Index Interpolation Tables(VCIIT) using the VQ indices from the adjacent(previous and next) frames. We applied the proposed scheme to the ITU-T G.723.1 speech coder and found that it improved reconstructed speech quality and outperforms conventional G.723.1 loss recovery algorithm. Moreover, the suggested simple scheme can be easily applicable to practical VoIP systems because it requires a very small amount of additional computational cost and memory space.

• 한국산업정보학회논문지
• /
• 제23권4호
• /
• pp.23-31
• /
• 2018

본 논문은 1.7 GHz 주파수 대역에서 HD 비디오를 무선으로 송수신하는 2T-2R(2 Transmitter-2 Receiver) 시스템을 설계 및 구현하였다. 해당 시스템은 HDL로 설계한 LTE-TDD 송수신 모뎀을 USRP RIO에 내장된 Xilinx Kintex-7칩에 구현하여 USRP RIO를 베이스밴드로 사용하였으며, USRP RIO에서 송수신되는 신호는 자체 설계한 1.7 GHz RF송수신 모듈로 업 다운 변환을 수행한 후 자체 설계한 2x9 서브 배열 안테나를 통해 최종적으로 HD 비디오 데이터를 통신하게 된다. USRP RIO와 Host PC의 통신방식은 데이터 송수신시 발생되는 지연을 최소화하기 위해　PCI express(Peripheral Component Intercon nect express)x4를 사용하였다. 구현한 시스템은 EVM 32 dBc의 기본 성능을 보였으며, 실험환경 내 어디서든 HD 비디오를 성공적으로 송수신하였다. 본 논문에서 제안하는 내용은 6 GHz 이하의 차세대 5G 이동통신 시스템뿐만 아니라 추후 밀리미터 대역을 사용하는 광대역 5G 이동통신 시스템으로의 활용이 가능하다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.765-768
• /
• 2012

본 논문에서는 USB형 DRM(Digital Radio Mondiale) 디지털라디오 수신기의 수신신호 성능 검사를 위한 DRM 수신 모니터링의 응용 S/W의 설계를 통한 수신 시스템의 신호를 분석함으로서 DRM30/DRM+신호를 수신하여, RF 상태 분석, 복조와 관련된 파라메터 확인, 오디오 서비스 정보 확인 및 오디오 재생, 텍스트 활용위한 데이터 표현, GPS 위치 정보 수신이 가능한 통합모듈 응용 S/W를 제안하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.339-342
• /
• 2003

This paper describes an RF/IF module for 2.4GHz wireless video and audio receivers The designed circuits are implemented using a Teflon board of which the size is $53mm\times42mm$. The measured LNA gain is 15dB, and the VCO output levels are around 2dBm. The sensitivity of the receiver is about -80dBm. The manufactured module consumes 140nA from a 8V supply.