• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.59-62
• /
• 2002

Before a developed digital Power System Stabilizer(PSS) is installed to real power system, an efficient trial test for installing PSS is needed. In this paper, the performance of developed digital PSS for a single hydro-turbine generator and infinite bus system has been investigated using Real Time Digital Simulator(RTDS) in order to install PSS to real power system practically. The test system was composed of RTDS, three phase voltage/current amplifier and the PSS and the test scheme provided a very efficient way to verify the design and control performance of a PSS to be applied to real power system. The trial installation test through AVR 3% step test and three fault analysis may be guaranteed to install PSS to real power system.

• 대한임상검사과학회지
• /
• 제41권4호
• /
• pp.153-157
• /
• 2009

The production of extended-spectrum ${\beta}$-lactamases ($ESBL_S$) of the TEM or SHV type by bacterial pathogens is a major threat to the use of the clinically important expanded-spectrum cephalosporins. The characterization of the SHV ESBLs producing Klebsiella pneumoniae strains present in clinical isolates is time-consuming processes. We describe here in the development of a novel system, which consists of a real time PCR. We found 11 K. pneumoniae strains to be presumptive strains ESBLs producers by clinical and laboratory standards institute (CLSI) guidelines. The double disk synergy test showed 8 ESBL positive and conventional PCR showed 10 SHV ESBL positive, which were K. pneumoniae strains isolates. By real time PCR analysis, SHV gene in 11 of 11 strains were identified. When sequencing analysis was compared with real time PCR, both analysis were presented 99% similarity. In this study, we used a rapid, sensitive, and specific real-time PCR (RT-PCR) method for detection of the assay SHV ESBL producing K. pneumoniae strains in clinical isolates.

• 한국지능시스템학회논문지
• /
• 제8권6호
• /
• pp.91-98
• /
• 1998

A DEDS is a system whose stated change in response to the occurrence of events from a predefined event set. A major difficulty in developing analytical results for the system is the lack of appropriate modeling techniques. In this paper, we consider the modeling and control problem for Discrete Event Dynamic Systems(DEDS) in the Temporal Logic framework(TLF) which have been recently defined. The traditional TLF is enhanced with time functions for real time control of Discrete Event Dynamic Systems. A sequence of event which drive the system from a given initial state to a given final state is generated by pertinently operating the given plants. This paper proposes the use of Real-time Temporal Logic as a modeling tool for the analysis and control of DEDS. An given example of fixed-time traffic control problem is shown to illustrate our results with Real-time Temporal Logic Framework.

• 한국산업정보학회논문지
• /
• 제4권1호
• /
• pp.1-6
• /
• 1999

이 논문은 실시간 소프트웨어의 요구 분석을 위한 구조이다. 이 방법은 실제 사용자들과의 쉬운 통신 수단으로 TNPN(Timed Numerical Petri Net)을 사용하는데, 시스템의 정확성을 위해서 RT시(Real Time Temporal Logic)에 기초한다. TNPT은 행위 명세언어로서 사용되며, 그 행위의 정당성은 RTTL로 표현되는데, 도달성 그래프를 통해 분석되었다. 그래서 사용자와 시스템의 두가지 요구사항이 모두 만족된다. 공유트랙 시스템의 예를 통하여 실시간의 성질(안전성, 응답성, 생존성, 우선순위)들이 검증되었다. 또한 이 구조는 자연스럽게 객체와 연결된다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (1)
• /
• pp.463-465
• /
• 1998

COncurrent Design Approach for Real-Time System(이하 COSATRS) 방법론은 Gomaa가 제안한 실시간 설계 방법론으로서 Real-Time Structured Analysis(이하 RTSA)또는 Concurrent Object-Based Real-Time Analysis(이하 COBRA)방법론을 이용하여 Control and Data Flow Diagram(이하 C&DFD)를 구성하고 이것에 병렬 태스크 구조화 지침, 정보 은닉 모듈 구조화 지침을 적용하여 Task Architecture Diagram (이하 TDA), Information Hiding Module(이하 IHM)을 구성하고 나서 이 둘을 결합하여 Software Architecture Diagram(이하 SAD)를 구성하게 된다. 본 논문에서는 CODARTS 방법론의 적용과정을 테이블을 구성하여 적용함으로써 실시간 S/W 설계 지원 시스템을 설계하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.776-787
• /
• 2001

The turbofan engine performance analysis for a medium scale commercial aircraft was carried out and the LQR control scheme for performance optimization was studied. By using scaled component maps from well-known CF6 engine characteristics, the steady-state performance analysis result was compared with BR715-56 engine performance data. The transient performance analysis was performed with four fuel schedules. The linear simulation was done at the maximum take-off condition. The real time linear simulation was performed by interpolation of the system matrices, which used the least square method as the function of LPC rotational speed. By using linear system matrices of design point, the LQR controller which used control variables for the fuel flow and the LPC bleed air was designed.

• Journal of Ubiquitous Convergence Technology
• /
• 제1권1호
• /
• pp.3-8
• /
• 2007

This paper presents a set of techniques used in a real-time visual surveillance system. The system is implemented on a low-cost embedded DSP platform that is designed to work with stationary video sources. It consists of detection, a tracking and a classification module. The detector uses a statistical method to establish the background model and extract the foreground pixels. These pixels are grouped into blobs which are classified into single person, people in a group and other objects by the dynamic periodicity analysis. The tracking module uses mean shift algorithm to locate the target position. The system aims to control the human density in the surveilled scene and detect what happens abnormally. The major advantage of this system is the real-time capability and it only requires a video stream without other additional sensors. We evaluate the system in the real application, for example monitoring the subway entrance and the building hall, and the results prove the system's superior performance.

• 제어로봇시스템학회논문지
• /
• 제11권2호
• /
• pp.175-185
• /
• 2005

The scheduling methods of the distributed real-time systems have been proposed. However, they have some weak points. They did not schedule both sporadic and periodic tasks and messages at the same time or did not consider the end-to-end constraints such as precedence relations between sporadic tasks. This means that system scheduling must guarantee the constraints of practical systems and be applicable to them. This paper proposes a new scheduling method that can be applied to more practical model of distributed real-time systems. System model consists of sporadic and periodic tasks with precedence relations and sporadic and periodic messages and has end-to-end constraints. The proposed method is based on a binary search-based period assignment algorithm, an end-to-end laxity-based priority assignment algorithm, and three kinds of schedulability analysis, node, network, and end-to-end schedulability analysis. In addition, this paper describes the application model of sporadic tasks with precedence constraints in a distributed real-time system, shows that existing scheduling methods such as Rate Monotonic scheduling are not proper to be applied to the system having sporadic tasks with precedence constraints, and proposes an end-to-end laxity-based priority assignment algorithm.

• 한국정보통신학회논문지
• /
• 제17권5호
• /
• pp.1239-1244
• /
• 2013

임상 의료 분야에서 질병 진단 및 치료를 위해서는 분자 수준(프로틴, DNA 등)의 크기 뿐만 아니라, 세포 수준에 대한 분석이 필요하다. 많은 경우 실험 샘플이 시간에 따라 변질되기 때문에 정확한 분석을 위해서는 빠른 분석과 실시간 데이터가 필요하다. 본 연구에서는 나노 마이크로 크기의 세포내 단백질이나 DNA의 변화 과정 등을 촬영할 수 있는 3차원 형광 관측 장치를 제작하고 이로부터 얻은 형광 이미지를 실시간 통합 관리 및 분석하기 위한 서버 클라이언트 기반의 형광 이미지 분석 시스템을 구축하였다. 시스템은 형광 관측 장치와 소프트웨어 그리고 형광 이미지를 실시간으로 분석할 수 있는 모바일 프로그램으로 구성된다. 개발된 시스템은 의료인이 시공간의 제약 없이 응급환자의 샘플에서 획득한 형광이미지를 실시간으로 전송받아 분석 및 진단을 내릴 수 있도록 해 주므로 유비쿼터스 헬스 구현에 활용할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.520-522
• /
• 2005

This paper presents the design and analysis of the electromagnetic system such as jumping ring system. Also, we study the characteristics of dynamics for system with initial parameter. For the propose of system control,, first, we simulate the MATLAB tool solving coupled differential equations with electric parameter, inductance and mutual inductances. Therefore, we design a jumping ring system using design results, implement, and analyze the jumping ring system real situation. For the near time, we present a control process, and compare of real system and software technique.