• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.59-62
• /
• 2002

Before a developed digital Power System Stabilizer(PSS) is installed to real power system, an efficient trial test for installing PSS is needed. In this paper, the performance of developed digital PSS for a single hydro-turbine generator and infinite bus system has been investigated using Real Time Digital Simulator(RTDS) in order to install PSS to real power system practically. The test system was composed of RTDS, three phase voltage/current amplifier and the PSS and the test scheme provided a very efficient way to verify the design and control performance of a PSS to be applied to real power system. The trial installation test through AVR 3% step test and three fault analysis may be guaranteed to install PSS to real power system.

• Korean Journal of Clinical Laboratory Science
• /
• v.41 no.4
• /
• pp.153-157
• /
• 2009

The production of extended-spectrum ${\beta}$-lactamases ($ESBL_S$) of the TEM or SHV type by bacterial pathogens is a major threat to the use of the clinically important expanded-spectrum cephalosporins. The characterization of the SHV ESBLs producing Klebsiella pneumoniae strains present in clinical isolates is time-consuming processes. We describe here in the development of a novel system, which consists of a real time PCR. We found 11 K. pneumoniae strains to be presumptive strains ESBLs producers by clinical and laboratory standards institute (CLSI) guidelines. The double disk synergy test showed 8 ESBL positive and conventional PCR showed 10 SHV ESBL positive, which were K. pneumoniae strains isolates. By real time PCR analysis, SHV gene in 11 of 11 strains were identified. When sequencing analysis was compared with real time PCR, both analysis were presented 99% similarity. In this study, we used a rapid, sensitive, and specific real-time PCR (RT-PCR) method for detection of the assay SHV ESBL producing K. pneumoniae strains in clinical isolates.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.6
• /
• pp.91-98
• /
• 1998

A DEDS is a system whose stated change in response to the occurrence of events from a predefined event set. A major difficulty in developing analytical results for the system is the lack of appropriate modeling techniques. In this paper, we consider the modeling and control problem for Discrete Event Dynamic Systems(DEDS) in the Temporal Logic framework(TLF) which have been recently defined. The traditional TLF is enhanced with time functions for real time control of Discrete Event Dynamic Systems. A sequence of event which drive the system from a given initial state to a given final state is generated by pertinently operating the given plants. This paper proposes the use of Real-time Temporal Logic as a modeling tool for the analysis and control of DEDS. An given example of fixed-time traffic control problem is shown to illustrate our results with Real-time Temporal Logic Framework.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.1
• /
• pp.1-6
• /
• 1999

This paper is on the analysis for the real-time software requirement. This method can be used for TNPN(Timed Numerical Peri Net) as a easy communication means with real-users. It is based on the RTTL(Real Time Temporal Logic) for correctness the system. TNPN is used to represent a behavior specification language, the validity of specified behaviors in TNPN is expressed in RTTL, and analyzed through the teachability graph. Thus, the requirement between user and system is satisfied Using the example of shared track, the validity of the property of real-time(safetiness, responsiveness, liveness, priority) is verified. Also this framework if given to connection with a object, natually.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.463-465
• /
• 1998

COncurrent Design Approach for Real-Time System(이하 COSATRS) 방법론은 Gomaa가 제안한 실시간 설계 방법론으로서 Real-Time Structured Analysis(이하 RTSA)또는 Concurrent Object-Based Real-Time Analysis(이하 COBRA)방법론을 이용하여 Control and Data Flow Diagram(이하 C&DFD)를 구성하고 이것에 병렬 태스크 구조화 지침, 정보 은닉 모듈 구조화 지침을 적용하여 Task Architecture Diagram (이하 TDA), Information Hiding Module(이하 IHM)을 구성하고 나서 이 둘을 결합하여 Software Architecture Diagram(이하 SAD)를 구성하게 된다. 본 논문에서는 CODARTS 방법론의 적용과정을 테이블을 구성하여 적용함으로써 실시간 S/W 설계 지원 시스템을 설계하였다.

• Journal of Mechanical Science and Technology
• /
• v.15 no.6
• /
• pp.776-787
• /
• 2001

The turbofan engine performance analysis for a medium scale commercial aircraft was carried out and the LQR control scheme for performance optimization was studied. By using scaled component maps from well-known CF6 engine characteristics, the steady-state performance analysis result was compared with BR715-56 engine performance data. The transient performance analysis was performed with four fuel schedules. The linear simulation was done at the maximum take-off condition. The real time linear simulation was performed by interpolation of the system matrices, which used the least square method as the function of LPC rotational speed. By using linear system matrices of design point, the LQR controller which used control variables for the fuel flow and the LPC bleed air was designed.

• Journal of Ubiquitous Convergence Technology
• /
• v.1 no.1
• /
• pp.3-8
• /
• 2007

This paper presents a set of techniques used in a real-time visual surveillance system. The system is implemented on a low-cost embedded DSP platform that is designed to work with stationary video sources. It consists of detection, a tracking and a classification module. The detector uses a statistical method to establish the background model and extract the foreground pixels. These pixels are grouped into blobs which are classified into single person, people in a group and other objects by the dynamic periodicity analysis. The tracking module uses mean shift algorithm to locate the target position. The system aims to control the human density in the surveilled scene and detect what happens abnormally. The major advantage of this system is the real-time capability and it only requires a video stream without other additional sensors. We evaluate the system in the real application, for example monitoring the subway entrance and the building hall, and the results prove the system's superior performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.2
• /
• pp.175-185
• /
• 2005

The scheduling methods of the distributed real-time systems have been proposed. However, they have some weak points. They did not schedule both sporadic and periodic tasks and messages at the same time or did not consider the end-to-end constraints such as precedence relations between sporadic tasks. This means that system scheduling must guarantee the constraints of practical systems and be applicable to them. This paper proposes a new scheduling method that can be applied to more practical model of distributed real-time systems. System model consists of sporadic and periodic tasks with precedence relations and sporadic and periodic messages and has end-to-end constraints. The proposed method is based on a binary search-based period assignment algorithm, an end-to-end laxity-based priority assignment algorithm, and three kinds of schedulability analysis, node, network, and end-to-end schedulability analysis. In addition, this paper describes the application model of sporadic tasks with precedence constraints in a distributed real-time system, shows that existing scheduling methods such as Rate Monotonic scheduling are not proper to be applied to the system having sporadic tasks with precedence constraints, and proposes an end-to-end laxity-based priority assignment algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1239-1244
• /
• 2013

In the field of clinical medicine and research, the analysis of such as protein and DNA at the molecular level and even at the cell level are necessary for disease diagnosis and treatment. In many cases, a real time image of samples is needed for the accurate analysis and manipulation of samples since experimental samples are degenerated with time. In this research, a three-dimensional fluorescence microscope device was developed for taking images of protein and DNA inside a single cell and the server-client based image analysis system was made for an integrated management of the real-time images taken from the microscope device. The system consists of a fluorescent measurement device, the associated software and a client program on smartphone. The developed system allows doctors or experimental managers to receive and look at the real-time experimental images taken from the samples of patients anywhere in the emergency, to analyze results and to instantly diagnose the disease and to transfer the results to the patients. As a result, the system is able to be utilized in the implementation of ubiquitous health as well.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.520-522
• /
• 2005

This paper presents the design and analysis of the electromagnetic system such as jumping ring system. Also, we study the characteristics of dynamics for system with initial parameter. For the propose of system control,, first, we simulate the MATLAB tool solving coupled differential equations with electric parameter, inductance and mutual inductances. Therefore, we design a jumping ring system using design results, implement, and analyze the jumping ring system real situation. For the near time, we present a control process, and compare of real system and software technique.