• Journal of the Society of Disaster Information
• /
• v.12 no.2
• /
• pp.122-129
• /
• 2016

In this study, a dual structured pipe for a preventive monitoring on a accident damage, a smartphone app program for a survey and a construction data collection and a server program for a real-time monitoring were developed. A pilot system was installed in the test field to analyze effects of a system developed in this study. The data for a damage prevention was detected by the attached sensors on the pipe. Exclusion was tested by the pressure sensors to be installed at regular intervals. The app and server programs was enabled to the real-time data collection and real-time monitoring linked by VRS survey equipments and a smartphone.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.573-576
• /
• 2013

In this paper, analysis method for current collection performance based on real-time current of catenary system is proposed. An innovative method based on track-side of railway system is used for measurement of currents for overhead contact line during the collection with pantograph. The evaluation of a qualitative ratio for current collection performance were conducted using proposed algorithm under various conditions such as laboratory and track-side. To check the validity of our approach, we compared between calculation results from current of contact wire and measurement results from arcing of pantograph using simulator in laboratory conditions. The results show that the behavior of current collection performance were analysis from currents of overhead contact line in AC electric railway system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.6
• /
• pp.463-475
• /
• 2009

Flash memory is suitable for real time systems because of its consistent performance for random access, low power consumption and shock resistance. However, flash memory needs blocking time to perform a garbage collection to reclaim invalidated pages. Moreover, the worst-case garbage collection time is significantly longer than the best-case garbage collection time. In this paper, we propose a FTL (Flash Translation Layer) mapping scheme called KAST (K-Associative Sector Translation). In the KAST scheme, user can control the maximum association of the log block to limit the worst-case garbage collection time. Performance evaluation using simulation shows that not only KAST completes the garbage collection within the specified time but also provides about 10~15% better average performance than existing FTL schemes.

• Journal of Computing Science and Engineering
• /
• v.7 no.2
• /
• pp.89-98
• /
• 2013

This paper presents a complete survey of recent techniques that are applied in the field of real-time Java computing. It focuses on the issues that are especially important for hard real-time applications, which include time predictable garbage collection, worst-case execution time analysis of Java programs, real-time Java threads scheduling and compiler techniques designed for real-time purpose. It also evaluates experimental frameworks that can be used for researching real-time Java. This overview is expected to help researchers understand the state-of-the-art and advance the research in real-time Java computing.

• International Journal of Oral Biology
• /
• v.46 no.3
• /
• pp.140-145
• /
• 2021

This study aimed to develop Lautropia mirabilis-specific quantitative real-time polymerase chain reaction (qPCR) primers based on the sequence of DNA-directed RNA polymerase subunit beta gene. The PrimerSelect program was used in designing of the qPCR primers, RTLam-F4 and RTLam-R3. The specificity of the qPCR primers were performed by conventional PCR with 37 strains of 37 oral bacterial species, including L. mirabilis. The sensitivity of the primers was determined by qPCR with the serial dilution of purified genomic DNA of L. mirabilis KCOM 3484, ranged from 4 ng to 4 fg. The data showed that the qPCR primers could detect only L. mirabilis strains and as little as 40 fg of genome DNA of L. mirabilis KCOM 3484. These results indicate that this qPCR primer pair (RTLam-F4/RTLam-R3) may be useful for species-specific detection of L. mirabilis in epidemiological studies of oral bacterial infectious diseases such as periodontal disease.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.1
• /
• pp.67-76
• /
• 2003

Recently consideration of health and interest on bio aerosols have been growing steadily. In this study, inertial impactor, which can be used to collect airborne particles and bio aerosols, was newly devised for real-time observation on the particles collected on impaction plate. and named Visual Impactor. Flow field and particle trajectory in the space between nozzle and impaction plate was analyzed numerically, and the collection effciencies were calculated. Calibration and performance evaluation of the Visual Impactor was conducted with polydisperse aerosols generated from 0.1％ sodium chloride solution. Cut-off diameter from numerical simulation was in good agreement with that from experimental results. Because of particle bounce and particle deposition on nozzle tip due to short jet-to-plate distance, the collection efficiencies from numerical and experimental analyses were different slightly. Visual Impactor was used to collect airborne particles, and the features of collected particles could be seen in real-time. Airborne particles in different weather conditions (fine, cloudy, and rainy) were sampled and compared one another The features of collected airborne particles were dependent strongly upon relative humidity. In addition, with hours elapsing, shapes and colors of collected particles were changed by evaporation and surface tension, etc.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1256-1261
• /
• 2015

Along with the increase of railway catenary system operation speed to 400 km/h, there have been growing demands for good quality current collection systems that satisfy quality standards as well as criteria for safe working. Retaining uniform elasticity tension of contact wires is essential in maintaining high quality contact between pantograph and OCL (Overhead Contact Line) of current collection systems in high speed railways. Therefore, the tension of contact wire must be kept within tight tolerance limits in both working conditions and adverse weather conditions of catenary system. In accordance with these conditions, this paper presents a real time monitoring system for the tensioning device of the newly installed catenary system on the special route of Honam high speed line for 400 km/h operation. For the verification of the true value of tension of contact wires, we have developed ring-type tensioning sensors which were installed on supporting points of mast which compose the catenary system. According to the field test performed on the Honam high speed line catenary system, variation of tension was measured accurately in real-time.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.4
• /
• pp.153-161
• /
• 2021

Real-time access is required to handle continuous and unstructured data and should be flexible in management under dynamic state. Platform can be built to allow data collection, storage, and processing from local-server or multi-server. Although the former centralize method is easy to control, it creates an overload problem because it proceeds all the processing in one unit, and the latter distributed method performs parallel processing, so it is fast to respond and can easily scale system capacity, but the design is complex. This paper provides data collection and processing on one platform to derive significant insights from various data held by an enterprise or agency in the latter manner, which is intuitively available on dashboards and utilizes Spark to improve distributed processing performance. All service utilize dockers to distribute and management. The data used in this study was 100% collected from Kafka, showing that when the file size is 4.4 gigabytes, the data processing speed in spark cluster mode is 2 minute 15 seconds, about 3 minutes 19 seconds faster than the local mode.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.672-674
• /
• 1998

Java virtual machine has the garbage collector that automate memory management. Mark-compact algorithm is one of the garbage collection algorithm that operating in 2 phases, marking and sweeping. One is Marking is marking live objects reachable from root object set. Sweeping is sweeping unmarked object from memory(return to free memory pool). This algorithm is easy to implement but cause a memory fragmentation. So compacting memory, before memory defragmentation become serious. When compacting memory, all other processes are suspended. It is critical for embedded system that must guarantee real-time processing. This paper introduce enhanced mark-compact garbage collection algorithm. Grouping the objects by their size that minimize memory fragmentation. Then apply smart algorithm to the grouped objects when allocating objects and compacting memory.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.344-351
• /
• 2005

It was discussed to satellite based DCS (NOAA, Orbcomm, ADEOS-II, CBERS in polar satellite and GMS, GOES, METEOSAT, INSAT, FY-2 in geostationary satellite) with PTT (Platform Transmitter Terminal) and DCP (Data collection Platform) in order to application of real-time DCS (Data Collection System) in the ocean and fisheries. For covering ocean data link area in the eastern hemisphere, it was proposed to take DCS on the Korean geostationary satellite in the marine environments.