• 제목/요약/키워드: Real-flight simulation

검색결과 157건 처리시간 0.03초

레이트자이로를 이용한 스트랩다운 비행자세측정장치 (Strapdown attitude reference system consisting of rate gyro)

  • 신용진;전창배;김현백;송기원;오문수
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
    • /
    • pp.50-53
    • /
    • 1989
  • This paper presents the configuration and performance test results of a SDARS, which consists of three rate gyros and Zilog 8002 microprocessor. Real time hardware-inthe-loop simulation was performed by 3 axis flight motion simulator applying the assumed typical profiles of angular motion. Test results showed that the performance of SDARS was satisfactory. And, attitude errors was reduced by compensation of gyro errors.

  • PDF

Intelligent Attitude Control of an Unmanned Helicopter

  • An, Seong-Jun;Park, Bum-Jin;Suk, Jin-Young
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.265-270
    • /
    • 2005
  • This paper presents a new attitude stabilization and control of an unmanned helicopter based on neural network compensation. A systematic derivation on the dynamics of an unmanned small-scale helicopter is performed. Combined rotor-fuselage-tail dynamics is derived in body-fixed reference frame with its origin at the C.G. of the helicopter. And the resulting nonlinear equation of motion consists of 6-DOF air vehicle dynamics as well as the rotor flapping and engine torque equations. A simulation model was modified using the existing simulator for an unmanned helicopter dynamic model, which reflects the unmanned test helicopter(CNUHELI). The dynamic response of the refined model was compared with the flight test data. It can be shown that a good coincidence was accomplished between the real unmanned helicopter system and the mathematical model. This dynamic model was linearized for classical controller design using small perturbation method. A Neuro-PD control system was designed for both longitudinal and lateral flight modes, and the results were compared with the PD-only control response. Simulation results show that the proposed Neuro-PD control system demonstrates better performance.

  • PDF

고속 카메라를 CCD 이용한 비행골프공의 데이터 측정 시스템 (The Flight Data Measurement System of Flying Golf Ball Using the High Speed CCD Camera)

  • 김기현;조재익;윤창옥;박현우;주우석;이동훈;윤태수
    • 한국HCI학회:학술대회논문집
    • /
    • 한국HCI학회 2009년도 학술대회
    • /
    • pp.168-172
    • /
    • 2009
  • 최근 체감형 스포츠 게임이 늘어나면서 실제 사용자의 동작을 인식하는 연구가 활발히 진행 중이다. 그 중에서도 골프에 관한 연구가 활발하다. 본 논문에서는 고속CCD카메라를 이용하여 골프공의 비행데이터를 측정한다. 고속CCD카메라는 촬영 시, 한 장의 이미지에 여러 번의 노출을 이용하여 고속으로 촬영하여 획득한 영상은 영상처리과정을 통하여 촬영된 공의 위치를 측정한다. 계산된 골프공의 위치는 물리공식을 이용하여 골프공의 비행데이터인 속도, 날아가는 방향을 계산한다. 본 시스템은 향후 비행하는 골프공뿐만 아니라, 야구, 테니스 등과 같은 타격 스포츠에서 체감형 게임 형태로 적용이 가능하다.

  • PDF

초음속 비행체의 소닉붐 측정과 도래각 추정 (Measurement and Arrival Direction Estimation of Supersonic Flight Sonic Boom)

  • 하재현;정석영;이영환;진현
    • 한국항공우주학회지
    • /
    • 제49권3호
    • /
    • pp.175-183
    • /
    • 2021
  • 초음속 비행체에서 발생하는 소닉붐은 일반적인 환경소음과 달리 초저주파 영역을 포함한 충격음으로 전파된다. 본 논문에서는 배열 음향센서를 이용하여 소닉붐의 특징을 왜곡 없이 측정하기 위한 계측방법과 소닉붐의 전파방향을 추정하기 위한 도래각 추정 방법에 대해 연구하였다. 음향센서의 배치에 따른 도래각 추정성능을 이론적인 방법으로 제시하였고 모의실험에서 얻은 통계값을 이용하여 본 연구에서 제안하는 도래각 추정 방법의 성능을 검증하였다. 또한 실제 초음속 비행체에서 발생한 소닉붐을 제안한 방법으로 측정하였고 그 결과를 분석하였다. 본 연구에서 얻은 결과로 소닉붐 측정을 위한 시스템 구성, 도래각 추정 방법과 그 성능에 대한 직관적인 개념을 제공하였다.

Photogrammetry-based reverse engineering method for aircraft airfoils prediction

  • Ba Zuhair, Mohammed A.
    • Advances in aircraft and spacecraft science
    • /
    • 제8권4호
    • /
    • pp.331-344
    • /
    • 2021
  • Airframe internal and external specifications are the product of intensive intellectual efforts and technological breakthroughs distinguishing each aircraft manufacturer. Therefore, geometrical information characterizing aircraft primary aerodynamic surfaces remain classified. When attempting to model real aircraft, many members of the aeronautical community depend on their personal expertise and generic design principles to bypass the confidentiality obstacles and sketch real aircraft airfoils, which therefore vary for the same aircraft due to the different designers' initial assumptions. This paper presents a photogrammetric shape prediction method for deriving geometrical properties of real aircraft airframe by utilizing their publicly accessible static and dynamic visual content. The method is based on extracting the visually distinguishable curves at the fairing regions between aerodynamic surfaces and fuselage. Two case studies on B-29 and B-737 are presented showing how to approximate the sectional coordinates of their wing inboard airfoils and proving the good agreement between the geometrical and aerodynamic properties of the replicated airfoils to their original versions. Therefore, the paper provides a systematic reverse engineering approach that will enhance aircraft conceptual design and flight performance optimization studies.

연속강하운용을 이용한 궤적 기반의 항공기 도착 관리 효과 분석 연구 (A Study on Effect Analysis of Trajectory-Based Arrival Management using Continuous Descent Operations)

  • 오은미;전대근
    • 한국항공운항학회지
    • /
    • 제30권4호
    • /
    • pp.1-8
    • /
    • 2022
  • In this study, we propose trajectory-based arrival management using CDO (Continuos Descent Operations). The operational procedures with TBO (Trajectory-Based Operations) concept were established to allow aircraft and ground system to share the trajectories with each other in real time. The proposed operational concept was validated in the air traffic control simulation environment, which consists of controller working position, pseudo pilot system, air traffic generation system, and controllers' decision support system for arrival management using CDO. Simulation results compared with actual flight data indicate that proposed concept could improve the efficiency of traffic flow management in terms of total descending time and fuel consumption. And it was confirmed that if there is a system that can share and utilize the synchronized trajectory, it can be helpful to control arrival aircraft and apply CDO concept.

편대비행위성의 항법 및 궤도제어를 위한 실시간 Hardware-In-the-Loop 시뮬레이션 테스트베드 초기 설계 (A Preliminary Development of Real-Time Hardware-in-the-Loop Simulation Testbed for the Satellite Formation Flying Navigation and Orbit Control)

  • 박재익;박한얼;심선화;박상영;최규홍
    • Journal of Astronomy and Space Sciences
    • /
    • 제26권1호
    • /
    • pp.99-110
    • /
    • 2009
  • 이 연구의 목적은 편대비행위성의 항법 및 궤도제어를 위한 실시간 Hardware-In-the-Loop(HIL) 시뮬레이션 테스트베드를 개발하는데 있다. HIL 시뮬레이션 테스트베드는 실제와 비슷한 하드웨어 환경을 구성하여 주어진 편대비행임무 요구조건에 따른 새로운 개념의 알고리즘을 테스트할 수 있는 시뮬레이터이다. HIL 시뮬레이션 테스트베드는 실제의 인공위성 시스템 인터페이스와 최대한 유사하게 설계되었으며 환경 컴퓨터, GPS 시뮬레이터, GPS 수신기, 비행제어 컴퓨터, 시각화 컴퓨터 등 총 5개의 독립적인 시스템으로 구성되어 있다. Spirent Communication사의 GSS6560 다중패널 RF 시뮬레이터와, (주)세트렉아이에서 제작한 우주용 GPS 수신기를 사용하여 실제와 유사한 GPS 관측데이터를 사용한다. GPS 수신기로부터 획득한 관측데이터는 비행제어 컴퓨터 시스템으로 전송되고 이를 통해 편대비행위성의 절대위치 및 상대위치결정을 수행하였다. 또한 이 결과를 바탕으로 비행제어 컴퓨터 시스템은 궤도조정에 필요한 제어값을 계산하여 환경 컴퓨터 시스템으로 전송한다. 이렇게 5개의 독립적인 시스템을 유기적으로 통합하여 폐순환반복(closed-loop) HIL 시뮬레이션 테스트베드를 설계하였다. 이 논문에서는 편대비행 위성의 항법 및 제어 알고리즘 테스트를 위한 실시간 HIL 시뮬레이션 테스트베드의 전반적인 구성방법과 세부적인 구성요소에 대해 설명하였다 저궤도 편대비행위성의 편대유지 임무에 대한 가상의 시나리오를 설정하여 위성 편대비행의 항법 및 궤도제어 알고리즘을 실험적으로 검증하였다.

시뮬레이션 기반의 지상지연 프로그램 적용방안에 관한 연구 - 제주국제공항을 사례로 - (A Study on Simulation-based Method for Implementation of Ground Delay Program for Jeju International Airport)

  • 이영종;조지은;백호종
    • 한국항공운항학회지
    • /
    • 제23권1호
    • /
    • pp.41-48
    • /
    • 2015
  • Being a cost-efficient solution for alleviating the traffic congestion in airspace, Air Traffic Flow Management (ATFM) has drawn more attentions from not only air traffic controllers but also researchers in the field of Air Traffic Management (ATM). Among other ATFM initiatives, it is believed that Ground Delay Program (GDP) could be effectively applied to reduce the congestion particularly in the relatively small airspace with dense traffic demand. This paper introduces a novel way that suggests flights to be delayed on the departing airports together with amount of the delays (in time) for those flights to be delayed. Adopting a fast-time simulation for predicting airspace delay of each flight for a given flight plan, the method is designed to iteratively and incrementally adjust the departure times in the plan towards reducing total airspace delays. Applying the method to Jeju airport with a hypothetically high demand, the paper demonstrates the airspace delay could be significantly reduced by applying GDP at Gimpo airport where more than 60% of Juju-bound flights departure. Although the simulation model needs to be calibrated and validated for the real-world application, the results clearly shows that the approach can possibly implemented as a tool for preparing the daily plan at the pre-tactical stage defined in the ICAO ATFM manual.

동시다발적인 유도무기 비행시험 수요에 대응하기 위한 모델기반 비행시험 시스템 개발 (Model-Based Approach to Flight Test System Development to Cope with Demand for Simultaneous Guided Missile Flight Tests)

  • 박웅;이재천
    • 한국산학기술학회논문지
    • /
    • 제20권1호
    • /
    • pp.268-277
    • /
    • 2019
  • 유도무기 비행시험 시스템은 비행시험 중 여러 가지 상태를 실시간으로 감시하고 비상상황 발생 시 안전조치를 수행할 수 있어야 한다. 점차 복잡화, 광역화되고 있는 비행시험의 환경 변화 속에서 시험안전 확보의 중요성이 더욱 증대되고 있다. 또한 국내외 정세 변화와 전시작전권 전환 등으로 인하여 다수의 유도무기체계가 동시에 개발되어야 하고 동시에 연구개발 및 시험평가 기간단축을 통한 조기 전략화 및 예산절감도 요구되는 상황이다. 이에 따라 국내의 부족한 시험장 자원 여건 하에서 비행시험 시 발생되는 위험은 증가하고 있으며 시험안전 확보를 위한 대책 마련이 시급한 실정이다. 이러한 요구에 부응하기 위해서 연구개발 초기 단계에서부터 비행시험 시스템의 문제를 식별하고 대처방안을 마련할 수 있도록 모델기반 비행시험 시스템 개발을 본 연구의 목표로 설정하였다. 구체적으로 유도무기 비행시험의 설계 및 검증 방법을 제안하였다. 제안된 방법은 선진 시험평가기관에서 연구하고 있는 Agile 방식의 Shift Left 시험평가 방법론과 항공우주분야에서의 시스템 참조모델을 활용하였다. 연구개발 단계에서 유도무기체계와 동시에 설계를 진행하고 비행시험 요구사항에 대한 상호 간의 결함을 조기에 식별하여 수정함으로써 시험평가 단계에서 수행하는 비행시험 시 발생될 위험을 완화할 수 있다. 또한 항공우주분야에서 복잡한 시스템을 통합하고 검증하는 데 적용하고 있는 참조모델을 기반으로 시스템 모델링 표준 언어인 SysML을 활용하여 모델기반 비행시험 시스템을 구현함으로써 다수의 유도무기 비행시험 설계에 적용할 수 있는 확장성을 갖고 있으며, 시뮬레이션 분석을 통해 비행시험에서 발생하는 문제를 조기에 식별하고 조치함으로써 시험평가 기간의 지연을 방지할 수 있다.

최적화 기법 기반의 항공기 스케줄러 개발 및 실제 공항의 수치적 모사 (A development of an Optimization-Based Flight Scheduler and Its Simulation-Based Application to Real Airports)

  • 유민석;송재훈;최성임
    • 한국항공우주학회지
    • /
    • 제41권9호
    • /
    • pp.681-688
    • /
    • 2013
  • 불가피하게 급증하는 항공기 수요량에 따른 여러 가지 문제들을 해결하는 방안으로 항공기의 지연시간을 줄여, 공항의 수용력을 극대화하는 항공교통관리가 주목받고 있다. 본 논문은 공항주변 항공교통흐름을 원활히 하여 항공기 처리량을 최대화하는 항공기 스케줄링의 최적화를 목적으로 한다. 본 연구에서 개발한 스케줄링 기법은 스케줄링 문제를 수학적으로 모델링한 후, 혼합정수선형계획법과 유전자 알고리즘을 도입하여 항공기 지연시간을 최소로 하는 최적의 스케줄링을 제공한다. 최적화된 스케줄링과 실제 인천 공항에서의 항공기 스케줄링과 비교해 보았고, 그 결과 최적화된 스케줄링이 제공하는 항공기 처리량이 현재 인천 공항에서 처리하는 항공기보다 현저히 높다는 결과를 확인할 수 있었다. 본 연구에서 개발한 스케줄러는 향후 항공기의 포화 상태를 적절하게 대처하는데 큰 도움을 줄 것이라 예상되어진다.