• Journal of Institute of Control, Robotics and Systems
• /
• 제11권3호
• /
• pp.214-221
• /
• 2005

For decades, airships have being developed in Europe (especially German) and America. Airships are planning to be used for advertisements and airliners as well. In Korea, KARI (Korea Aerospace Research Institute) is developing stratospheric communication airship and the similar research is carried out in Japan. Among them, Zeppelin of German has the cutting-edge airship technology with Zeppelin NT. In this paper, the flight performance and stability were evaluated by comparing mathematical theory and the real test. The stability was examined through dynamic modeling and assured by designing controllers at each flight mode. Elevator angle, rudder angle, magnitude of thrust and tilting angle of thrust vector were used as control inputs. Moreover, after measuring the airship velocity, flight direction, magnitude and direction of the wind, attitude angles and trajectories of the airship at each flight mode, the results were compared with the simulation. To get the reasonable data, low-pass filter and band-stop filter were designed to get rid of the sensor noise and engine vibration. The test was accomplished at cruise mode, turning mode, and deceleration. To conclude, with comparing the simulation data and flight test data, it could be known that the dynamic model used in this paper was reasonable.

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2016년도 춘계학술대회
• /
• pp.269-275
• /
• 2016

This paper considers the arrival, airport and departure capacity as a whole, through which, the network effect between airports is fully emphasized, the flight action is coordinated, and the flight demand pattern is reasonably assigned. The optimization problem of flight queues in multi-airport is studied in detail; the mathematical model of multi-airport opening non-real time flow management in terminal area is established, and related problems such as the parameters, the simplification and the solving of the model are discussed in detail to some extent. Appropriate decision making variables are taken to make the multi-airport network system linear 0-1 integer programming model, thus, the solving of the model is available and the central flow management is realized. The heuristic implicit enumeration presented in this paper can effectively solve this kind of problems. Through the simulation of some airports network system, we not only validate the algorithm presented in this paper, but also give a deep analysis of the results, which would produce reference for later practicable use. The simulation proves that this algorithm offers a good way to settle the problem of multi-airport flight queue optimization in air traffic management automation system in terminal area.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.108-117
• /
• 2017

This paper presents a distribution simulation model for dual purpose improved conventional munitions based on flight test data. A systematic procedure for designing a dispersion simulation model is proposed. A new accumulated broken line graph was suggested for designing the distribution shape. In the process of verification and simulation for the distribution simulation model, verification was performed by first comparing data with firing test results, and an application simulation was then conducted. The Monte Carlo method was used in the simulations, which reflected the relationship between ejection conditions and real distribution data. Before establishing the simulation algorithm, the dominant ejection parameter of the submunitions was examined. The relationships between ejection conditions and distribution results were investigated. Five key distribution parameters were analyzed with respect to the ejection conditions. They reflect the characteristics of clustered particle dynamics and aerodynamics.

• Journal of Institute of Control, Robotics and Systems
• /
• 제11권11호
• /
• pp.913-919
• /
• 2005

An advanced method of Relaxed Static Stability (RSS) is utilized for improving the aerodynamic performance of modem version supersonic jet fighter aircraft. The flight control system utilizes RSS criteria in both longitudinal and lateral-directional axes to achieve performance enhancements and improve stability. Standard CLDA (Control Law Design and Analysis) process is provided that reduce the development period of the flight control system. In addition, if this process is employed in developing flight control laws, it reduces the trial and error development and verification of control laws. This paper details the design process of developing a flight control law for the RSS aircraft, utilizing military specifications, linear and nonlinea, analysis using XMATH and ATLAS(Aircraft, Tim Linear and Simulation), handling quality tests using the HQS (Handling Quality Simulator), and real flight test results to verify aircraft dynamic flight responses.

• Journal of Institute of Control, Robotics and Systems
• /
• 제12권11호
• /
• pp.1130-1137
• /
• 2006

Relaxed Static Stability(RSS) concept has been applied to improve aerodynamic performance of modern version supersonic jet fighter aircraft. Therefore, the flight control systems are necessary to stabilizes the unstable aircraft and provides adequate handling qualities. The initial production flight control system are verified by flight test and it's always an elements of danger because of flight-critical nature of control law function and design error due to model base design method. These critical issues impact to flight safety, and it could be lead to a loss of aircraft and pilot's life. Therefore, development of an easily modifiable RFCS(Research Flight Control System) capable of reverting to a PFCS(Primary Flight Control System) of reliable control law must be developed to guarantee the flight safety. This paper addresses the concept of SSWM(Software Switching Mechanism) using the fader logic such as TFS(Transient Free Switch) based on T-50 flight control law. The result of the analysis based on non-real time simulation in-house software using SSWM reveals that the flight control system are switching between two computers without any problem.

• Journal of Institute of Control, Robotics and Systems
• /
• 제13권7호
• /
• pp.694-702
• /
• 2007

The SSWM(Software Switching Mechanism) of I-processor concept using non-real time in-house software simulation program is an effective method in order to develop the flight control law in desktop or HQS environment. And, this system has some advantages compare to HSWM(Hardware Switching Mechanism) such as remove the time delay effectiveness and reduce the costs of development. But, if this system loading to the OFP(Operational Flight Program), the OFP guarantee the enough throughput in order to calculate the two control law at once. Therefore, the HSWM(Hardware Switching Mechanism) of 2-processor concept is necessary. This paper addresses the concept of HSWM of the HQS-PC interface using TCP/IP(Transmission Control Protocol/Internet Protocol) communication based on flight control law of advanced supersonic trainer. And, the fader logic of TFS(Transient Free Switch) and stand-by mode of reset '0' type are designed in order to reduce the abrupt transient response and minimize the integrator effect in pitch axis. The result of the analysis based on HQS pilot simulation using HSWM reveals that the flight control systems are switching between two computers without any problem.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.203-206
• /
• 1996

The purpose of this paper is to find how to determine the parameters of the basic control system design such as hinge moment coefficients and to display the controllability of the ChangCong-91. Since the estimation from the flight test of real aircraft is the most reliable, we performed the flight test of ChangGong-91 to get the various parameters such as velocity, height, control force, control surface deflection, 3 axis acceleration, 3 axis angular rate, pitch angle, angle of attack temperature and so on. We recorded the flight test data in VHS tapes and stored them to personal computer using A/D(analog to digital) converter. Flight test was done in various conditions, and the acquired data was processed with parameter identification method such as least square method. These data will be utilized for the development of Autopilot System design and Control Loading System design.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.969-974
• /
• 2004

For a maneuvering unmanned autonomous helicopter, it is necessary to design a proper controller of each flight mode. In this paper, overall helicopter dynamics is derived and hovering model is linearized and transformed into a state equation form. However, since it is difficult to obtain parameters of stability derivatives in the state equation directly, a linear control model is derived by time-domain parametric system identification method with real flight data of the model helicopter. Then, two different controllers - a linear feedback controller with proportional gains and a robust controller - are designed and their performance is compared. Both proposed controllers show outstanding results by computer simulation. These validated controllers can be used to autonomous flight controller of a real unmanned model helicopter.

• IEMEK Journal of Embedded Systems and Applications
• /
• 제10권2호
• /
• pp.73-79
• /
• 2015

Dynamic culling scheme is usually implemented to handle overhead caused by rendering the massive large-scale terrain data in flight simulator. However, existing culling scheme without considering altitude is not suitable for flight simulator due to additional computational overhead. To solve this problem, in this paper, we propose hybrid approach by applying two dynamic culling schemes depending on altitude. In addition, we remove unnessary computational overhead by creating different z-map resolution when aircraft changes its altitude. The proposed scheme is implemented with open graphic library and tested with real terrain data. Through the experimental results, we can recognize the improved rendering speed about 8 to 73 percents as compared to existing scheme.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제35권6호
• /
• pp.548-555
• /
• 2007

Typical helicopter simulation programs rely on differential equations of a closed form. However, since these equations are derived using various assumptions, their usefulness is limited to small flight regions and specific model types. This paper presents a component based rotorcraft simulation program. The program adopts methods of multi-body dynamics and is written in an object-oriented programming language. The program was validated using an AH-1G helicopter simulation. The trim results are well matched with flight test data. It is also shown that program is capable of running in real-time on a desktop computer.