• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2075-2083
• /
• 2016

The real time IAQ (Indoor Air Quality) management is very important for large buildings and underground facilities such as subways because poor IAQ is immediately harmful to human health. Such IAQ management requires monitoring, prediction and control in an integrated and real time manner. In this paper, we present three PM10 hourly prediction models for such realtime IAQ management as both Multiple Linear Regression (MLR) and Artificial Neural Network (ANN) models. Both MLR and ANN models show good performances between 0.76 and 0.88 with respect to R (correlation coefficient) between the measured and predicted values, but the MLR models outperform the corresponding ANN models with respect to RMSE (root mean square error).

• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.88-93
• /
• 1999

This paper presents the experimental examinations and statistical quantitative analysis of the correlation between the cumulative counts of acoustic emission(AE) during plastic deformation periods of the welding and the tensile strength and other properties of the bar-to-bar welded joints of O.D. 16mm shaft(SM40C) as well as the various welding variables. And this is a new approach which attempts finally to develop real-time quality monitoring system for friction welding. The results lead to a practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro structural defects.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.2
• /
• pp.25-32
• /
• 2004

We surveyed the coastal structure damage created by typhoon ‘Maemi’, which heavily struck the Korean peninsula on September 12, 2003. The survey revealed that high tides and strong winds induced by the typhoon were the main causes of the coastal damage, especially in the Busan areas. Though some experimental real-time coastal monitoring stations captured the typhoon movements at the critical time, more systematic and complete system should be implemented to save human lives and property from huge typhoon disasters.

• Smart Structures and Systems
• /
• v.19 no.6
• /
• pp.587-599
• /
• 2017

This paper introduces an approach to the realization of an ICT-based bridge remote monitoring system that enables real-time monitoring and controlled adjustments for unexpected heavy loads and also for damaging earthquakes or typhoons. In this paper, an integrated bridge remote monitoring system called the "Intelligent Bridge", which consists of a stand-alone monitoring system (SMS) and a web-based Internet monitoring system(IMS), was developed for not only bridge maintenance but also as an application for a para-stressing bridge system. To verify the possibility of controlling the actual structural performance of an "Intelligent Bridge", a model 2-span continuous cable-stayed bridge with adjustable cables was constructed. The experimental results demonstrate that the implemented monitoring system supplies detailed and accurate information about bridge behaviour for further evaluation and diagnosis, and it also opens up prospects for future application of a web-based remote system to actually adjust in-service bridges under field conditions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.320-320
• /
• 2013

Film thickness monitoring with plasma impedance monitoring (PIM) is demonstrated for small area $SiO_2$ RF plasma etching processes in this work. The chamber conditions were monitored by the impedance signal variation from the I-V monitoring system. Moreover, modified principal component analysis (mPCA) was applied to estimate the $SiO_2$ film thickness. For verification, the PIM was compared with optical emission spectroscopy (OES) signals which are widely used in the semiconductor industry. The results indicated that film thickness can be estimated by 1st principal component (PC) and 2nd PC. Film thickness monitoring of small area $SiO_2$ etching was successfully demonstrated with RF plasma harmonic impedance monitoring and mPCA. We believe that this technique can be potentially applied to plasma etching processes as a sensitive process monitoring tool.

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.769-781
• /
• 2019

Dynamic displacement response of civil structures is an important index for in-construction and in-service structural condition assessment. However, accurately measuring the displacement of large-scale civil structures such as high-rise buildings still remains as a challenging task. In order to cope with this problem, a vision-based system with the use of industrial digital camera and image processing has been developed for long-distance, remote, and real-time monitoring of dynamic displacement of supertall structures. Instead of acquiring image signals, the proposed system traces only the coordinates of the target points, therefore enabling real-time monitoring and display of displacement responses in a relatively high sampling rate. This study addresses the in-situ experimental verification of the developed vision-based system on the Canton Tower of 600 m high. To facilitate the verification, a GPS system is used to calibrate/verify the structural displacement responses measured by the vision-based system. Meanwhile, an accelerometer deployed in the vicinity of the target point also provides frequency-domain information for comparison. Special attention has been given on understanding the influence of the surrounding light on the monitoring results. For this purpose, the experimental tests are conducted in daytime and nighttime through placing the vision-based system outside the tower (in a brilliant environment) and inside the tower (in a dark environment), respectively. The results indicate that the displacement response time histories monitored by the vision-based system not only match well with those acquired by the GPS receiver, but also have higher fidelity and are less noise-corrupted. In addition, the low-order modal frequencies of the building identified with use of the data obtained from the vision-based system are all in good agreement with those obtained from the accelerometer, the GPS receiver and an elaborate finite element model. Especially, the vision-based system placed at the bottom of the enclosed elevator shaft offers better monitoring data compared with the system placed outside the tower. Based on a wavelet filtering technique, the displacement response time histories obtained by the vision-based system are easily decomposed into two parts: a quasi-static ingredient primarily resulting from temperature variation and a dynamic component mainly caused by fluctuating wind load.

• Journal of Korea Multimedia Society
• /
• v.20 no.5
• /
• pp.808-826
• /
• 2017

Most of conventional DSS's(Digital Signage Systems) have been built based on LAMP framework. Recent researches have shown that MEAN or MERN stack framework is simpler, more flexible, faster and more suitable for web-based application than LAMP stack framework. In this paper, we propose a design and implementation of MEARN (ME(A+R)N) stack-based real-time digital signage system, MR-DSS, which supports handing real-time tasks like urgent/instant messaging, system status monitoring and so on, efficiently in addition to conventional digital signage CMS service tasks. MR-DSCMS, CMS of MR-DSS, is designed to provide most of its normal services by REST APIs and real-time services like urgent/instant messaging by Socket.IO base under MEARN stack environment. In addition to architecture description of components composing MR-DSS, design and implementation issues are clarified in more detail. Through experimental testing, it is shown that 1) MR-DSS works functionally well, 2) the networking load performance of MR-DSCMS's REST APIs is better compared to a well-known open source Xibo CMS, and 3) real-time messaging via Socket.IO works much faster than REST APIs.

• The Journal of Engineering Geology
• /
• v.34 no.2
• /
• pp.173-191
• /
• 2024

Landslides pose significant threats to many countries globally, yet the development and implementation of effective landslide early warning systems (LEWS) remain challenging due to multifaceted complexities spanning scientific, technological, and political domains. Addressing these challenges demands a holistic approach. Technologically, integrating thresholds, such as rainfall thresholds, with real-time data within accessible, open-source software stands as a promising solution for LEWS. This article introduces LandScient_EWS, a PHP-based program tailored to address this need. The software facilitates the comparison of real-time measured data, such as rainfall, with predefined landslide thresholds, enabling precise calculations and graphical representation of real-time landslide advisory levels across diverse spatial scales, including regional, basin, and hillslope levels. To illustrate its efficacy, the program was applied to a case study in Medellin, Colombia, where a rainfall event on August 26, 2008, triggered a shallow landslide. Through pre-defined rainfall intensity and duration thresholds, the software simulated advisory levels during the recorded rainfall event, utilizing data from a rain gauge positioned within a small watershed and a single grid cell (representing a hillslope) within that watershed. By identifying critical conditions that may lead to landslides in real-time scenarios, LandScient_EWS offers a new paradigm for assessing and responding to landslide hazards, thereby improving the efficiency and effectiveness of LEWS. The findings underscore the software's potential to streamline the integration of rainfall thresholds into both existing and future landslide early warning systems.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.42-50
• /
• 2008

The real-time bio-signal monitoring system based on the ZigBee and SIP/RTP has proposed and implemented for telemedicine but that has some problems at the stabilities to transmit bio-signal from the sensors to the other sides. In this paper, we designed and implemented a real-time bio-signal monitoring system that is focused on the reliability and efficiency for transmitting bio-signal at real-time. We designed the system to have enhanced architecture and performance in the ubiquitous sensor network, SIP/RTP real-time transmission and management of the database. The Bluetooth network is combined with ZigBee network to distribute traffic of the ECG and the other bio-signal. The modified and multiplied RTP session is used to ensure real-time transmission of ECG, other bio-signals and speech information on the internet. The modified ECG compression method based on DWLT and MSVQ is used to reduce data rate for storing ECG to the database. Finally we implemented a system that has improved performance for transmitting bio-signal from the sensors to the monitoring console and database. This implemented system makes possible to make various applications to serve U-health care services.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.57-66
• /
• 2014

This paper proposes the UHISRL(Ubiquitous Healthcare Information System based on Real Time Location) which manages patient, doctor, medicine by using RFID. The proposed UHISRL monitors the patient's health state, and enables us to confirm the result with Smart Phone and Tablet PC. Also, it can block Replay and Spoofing attack by using the ERHL(Extended Randomized Hash Lock) authentication scheme designed in this paper. A patient privacy is enhanced by limiting UHISRL DB access according to attributes with CP-ABE (Cipher Text - Attributed based Encryption) technique. Specially, UHISRL can prevent an unexpected accident by monitoring a chronic patient's emergency situation in real time.