• 한국농공학회논문집
• /
• 제57권2호
• /
• pp.93-101
• /
• 2015

The purpose of this study is to evaluate the paddy irrigation efficiency using real-time water level monitoring data and intermittent irrigation model in Gimjae, Dong-Jin irrigation district. For this study, the real-time water level data in Gimjae main canal and other secondary canals were collected from 2012 to 2014 and converted to daily discharge using rating curve in each canal. From intermittent irrigation model in paddy, irrigation water requirement was estimated and irrigation efficiency was calculated. The average amount of irrigation water supply per unit irrigation area was 1,011 mm in Gimjae main canal for 12,749 ha irrigation area, 1,011 mm in the secondary canal of upper region and 1,470 mm in the secondary canal of lower region. The median irrigation loss was 43 % in Gimjae main canal, 25 % in secondary canal of upper region and 35 % in the secondary canal of lower region. The larger irrigation area is, the irrigation loss rates tend to decrease in secondary canals. Monthly median irrigation losses in upper region were 10 (June) - 40 % (September) and those in lower region were 25 (May) to 40 % (April, June, August, and September). The results of canal management loss can be available as the basic data for irrigation water management and estimating guideline of optimal irrigation water supply to improve agricultural water use efficiencies.

• 한국동물위생학회지
• /
• 제45권3호
• /
• pp.145-153
• /
• 2022

Pathogens such as feline herpesvirus, feline calicivirus, Bordetella bronchiseptica, Chlamydia felis, Mycoplasma felis and Pasteurella multocida usually cause feline upper respiratory tract disease (URTD). Real-time PCR was used to analyze the detection and prevalence of the most common respiratory pathogens in cats with (n=69) and without respiratory signs (n=31). Pathogens were detected in 53 cats, divided into 37 (69.8%) with a single pathogen, 15 (28.3%) with two pathogens, and 1 (1.9%) with three pathogens. M. felis had the highest detection rate in 29 (42.0%) cats, P. multocida was detected in 18 (26.1%), FHV in 10 (14.5%), FCV in 7 (10.1%), B. bronchiseptica in 3 (4.3%), and C. felis in 2 (2.9%). M. felis was the most frequently detected pathogen in cats living outdoors without vaccination. Of the 37 cats infected with single pathogen, nasal discharge was observed in 13 (35.1%), ocular signs in 6 (16.2%), drooling in 5 (13.5%), dyspnea in 3 (8.1%), and asymptomatic in 10 (27.0%). In 51 outdoor and 49 indoor cats, pathogens were detected in 35 (68.6%) and 18 (36.7%) cats, respectively. Of the 29 cats infected with M. felis, 22 (75.9%) showed respiratory signs, and 7 (24.1%) were healthy. In the age of the 53 positive cats, 10 (18.9%) were under the age of 1 year, 26 (49.1%) were aged 1~3 years, and 17 (32.1%) were aged 3 years or older. Although the number of cats in the study was small, the results can provide valuable data on the prevalence of URTD in Korean cats.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.95-95
• /
• 2010

Because of the environmental matters the importance of the city railroad is as time goes by increasing. The case of obstacle of the power equipment which supplies electric power to city railroad will occur social and economical enormous loss. Thus, I studied on the preventing method in advance which makes it possible for us to maintain facilities efficiently. The main check points of the power facilities are voltage, current, humidity, partial discharge, move current. These points are gathered by sensor and transmitting to data acquisition device. These data are used to check equipment status in real time. In this paper I described in brief test process and results of the detection system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1930-1936
• /
• 2010

Because of the environmental matters the importance of the city railroad is as time goes by increasing. The case of obstacle of the power equipment which supplies electric power to city railroad will occur social and economical enormous loss. Thus, I studied on the preventing method in advance which makes it possible for us to maintain facilities efficiently. The main check points of the power facilities are voltage, current, humidity, partial discharge, move current. These points are gathered by sensor and transmitting to data acquisition device. These data are used to check equipment status in real time. In this paper I described in brief test process and results of the detection system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1255-1260
• /
• 2004

Decomposition of ozone at room temperature was investigated comparatively with commercial monolithic ozone decomposition catalyst (ODC, $MnO_2$) and monolithic photo catalyst ($TiO_2$). The effects of residence time, UV (ultraviolet) light dependence and ozone concentration on the conversion was presented. UV ray was irradiated using BLB (black light blue) lamp ($315{\sim}400$ nm), supplied with a constant intensity in the reactor. The concentration of ozone in the square-shape reactor can be controlled by combining the DBD (dielectric barrier discharge) reactor with an AC high voltage supply system. The catalytic performance, in presence of UV irradiation did not show significant changes for $MnO_2$ catalyst. $TiO_2$ catalyst was the different case, which showed higher decomposition activity in presence of UV irradiation. Deactivation of catalyst detected by real-time ozone monitor for 120 hours with a constant inlet ozone concentration.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.427-427
• /
• 2021

During the rainy season, heavy downpours are always a source of concern for the world. Flooding and heavy rains can devastate communities, disrupt agriculture, and contribute to traffic accidents.. Weir and flow hall effect sensors are the conventional analytical methods for measuring flow rate; in this paper, we analyzed manhole flowrate statistics. The measurement of the flow rate of a notch/weir is a time-consuming task that necessitates continuous mathematical analysis. . We created three types of IoT sensors in this study: (HC-SR04 ultrasonic, YF-S201 magnetic, and HB100 radar), which take the sensor's real-time input signal and estimate the flow using a notch equation and a previously calibrated optimized coefficient of discharge. The proposed systems are cost-effective, but in terms of accuracy, we found that the HC-SR04 ultrasonic sensor is the best of the three systems

• 지역사회간호학회지
• /
• 제10권1호
• /
• pp.70-79
• /
• 1999

This study attempts to encourage the development of a rehabilitation delivery system as a substitute service for hospitalization such as a community based intermediate facility or home health care. We need substitute services for hospitalization to curtail the length of stay for inpatients due to car accidents. It focused on developing an estimation for early discharge based on a detailed statement of treatment from medical records of 109 inpatients who were hospitalized at General Hospital in 1997. This study has three specific purposes: First, to find the mean length of stay and mean medical expenditure. Second, to estimate the mean of early discharge from the mean length of stay. Third, to analyize the income effect per bed from early discharge. In order to analyze the length of stay and medical expenditure of inpatients the author conducted a micro and macro-analysis with medical expenditure records. To estimate the early discharge we examined with a group of 4 experts decreases in the amount of treatment after surgery, in treatments, in tests, in drug methods. We also looked their vital signs, the start of ROM exercise, the time removel, a patient's visitations, and possible stable conditions. In addition to identifing the income effect due to an early discharge, the data was analyzed by an SPSS-PC for windows and Excell program with a regression analysis model. The research findings are as follows: First, the mean length of stay was 47.56 days, but the mean length of stay due to early discharge was 32.26 days. The estimation of early discharge days was shown to depend on the length of stay. The longer the length of stay, the longer the length before discharge. For example, if the patient stayed under 14 days the mean length of stay was 7.09 while an early discharge was 6.39, whereas if the mean length of stay was 155.73, the early discharge time was 107.43. The mean medical expenditure per day of car accident patients was found to be 169,085 Won, whereas the mean medical expenditure per day was shown to be in a negative linear form according to the length of stay. That is the mean expenditure for under 14 days of stay was 303,015 Won and the period of the hospitalization of 15 days to 29 days was 170,338 Won and those of 30 days to 59 days was 113,333 Won. The estimation of the income effect due to being discharged 16 days was around 2,350,000 Won with a regression analysis model. However, this does not show the real benefits from an early discharge, but only the income increasing amount without considering prime medical cost at a general hospital. Therefore, we need further analysis on cost containments and benefits incending turn over rates and medical prime costs. From these research findings, the following suggestions have been drawn, we need to develop strategies on a rehabilitation delivery system focused on consumers for the 21st century. Varions intermediate facilities and home health care should be developed in the community as a substitute for shortening the length of stay in hospitals. In home health care cases, patients who want rehabilitation services as a substitute for hospitalization in cooperation with private health insurance companies might be available immediately.

• 한국화재소방학회논문지
• /
• 제34권4호
• /
• pp.1-6
• /
• 2020

본 논문은 직렬 아크 방전이 진행될 때의 전압 및 전류 파형을 실시간 측정하였다. 아크 방전의 방사 패턴을 분석한 결과 간헐적인 방전, 아크의 성장, 발열부의 생성, 플룸의 발생, 적열부 형성 순서로 진행되는 것을 알 수 있었다. 직렬 아크 방진이 진행될 때 전류 및 전압 파형은 정현파와 같은 주기성을 나타냈다. 그리고 + 파형에서 - 파형으로 바뀔 때와 - 파형에서 + 파형으로 바뀔 때 파형의 재기전압이 발생하는 것이 확인되었다. 방전이 진행될 때 1 s 동안에 발생하는 열량은 약 0.317 mJ이고, 600 s 동안에 약 190 mJ의 열이 발생하는 것으로 해석되었다. 그리고 단락 지속시간은 약 1.66 ms인 것으로 해석되었으며, 동일한 주기에서 전압 파형은 49.9 V까지 전위가 상승하는 것을 알 수 있었다. 또한, 방전이 진행될 때 전류의 실효치는 약 1.72 A이고, 최대치는 약 2.53 A로 분석되었다. 그리고 전압의 실효치는 약 42.8 V로 계산되었고, 최대치는 약 208 V로 측정되었다.

• 한국수자원학회논문집
• /
• 제50권8호
• /
• pp.521-535
• /
• 2017

음향 도플러 유속계(Acoustic Doppler Current Profiler, ADCPs)는 하천의 유량측정에 널리 사용되고 있으나, 유량 측정성과의 불확도를 평가하는 방법에 대하여 진행된 연구는 부족한 현실이며, 이는 실제 하천에서 유속 및 유량 등의 수리량을 조절하는 것이 현실적으로 불가능하여 ADCP의 불확도 요인별 실험 및 분석이 어렵기 때문이다. 유량 및 수리량의 측정 불확도를 평가하기 위하여 과학 및 공학 분야에서는 다양한 연구들이 진행되어 왔으며, 그 중 국제적으로 공인받고 있는 방법 중 하나가 GUM (Guide to the Expression of Uncertainty Measurement)이다. 본 연구에서는 GUM 표준안을 기반으로 ADCP의 유량 측정 불확도를 평가하기 위한 연구를 수행하였다. ADCP의 유량 측정 불확도 요인별 분석을 수행하기 위하여 유량 공급의 조절이 가능한 실 규모 수로를 보유하고 있는 하천실험센터에서 실험을 진행하였으며, ADCP의 측정 정확도에 영향을 미치는 수심, 측정 지점에서 하안까지의 거리, ADCP의 잠김 깊이, 유속 오차, 측정 시간, 반복 횟수, 하상 조건 등에 대한 측정 정확도 평가 실험을 수행하였다. ADCP로 유량을 측정하는 방법은 지점측정방식을 기반으로 유속-면적법을 통해 산정하는 방법과 일반적으로 사용되는 이동측정방식이 있으며, 본 연구에서는 ADCP의 지점측정방식을 통해 유량을 산정하는 Section-by-Section 방법으로 산정된 유량의 불확도를 평가하였다. 모든 측정 결과는 요인별 불확도 평가를 수행하기 위하여 유속은 ADV, 수심은 광파기로 측정된 결과와 비교하였다.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.130-136
• /
• 2015

This study describes the structure and operation modes of vertical stabilization (VS) converter for international thermonuclear experimental reactor (ITER) and proposes a protection method. ITER VS converter supplies voltage (${\pm}1000V$)/current (${\pm}22.5kA$) to superconducting magnets for plasma current vertical stabilization. A four-quadrant operation must be achieved without zero-current discontinuous section. The operation mode of the VS converter is separated in 12-pulse mode, 6-pulse mode and circulation current mode according to the magnitude of the load current. Protection measures, such as bypass and discharge, are proposed for abnormal conditions, such as over current, over voltage, short circuit, and voltage sag. VS converter output voltage is controlled to satisfy voltage response time within 20 msec. Bypass operation is completed within 60 msec and discharge operation is performed successfully. The feasibility of the proposed control algorithm and protection measure is verified by assembling a real controller and implementing a power system including the VS converter in RTDS for a hardware-in-loop (HIL) facility.