• 대한화학회지
• /
• 제27권3호
• /
• pp.218-223
• /
• 1983

새로운 반응성염료 개발의 일환으로 trifluoro-s-triazine을 반응성분으로 이용하여 한 분자에 2개의 서로 다른 chromophore를 가지는 반응성염료를 합성한 다음, 이의 가수분해속도와 면섬유에 대한 염색성을 조사하였다. 이 염료의 유사 일차 가수분해속도상수, $k_w$는 pH=10.0, 온도 $60{\circ}C$에서 k_w=2.6{\times}10^{-2}min^{-1}$로서 monochlorotriazine 반응성염료보다 높은 값을 보였으며 염착률과 고착율 역시 monochlorotriazine 계 염료보다 우수하였다. 얻어진 반응성 염료는 황색계열로서 수율은 75%였다.

• Journal of Microbiology and Biotechnology
• /
• 제30권8호
• /
• pp.1252-1260
• /
• 2020

(R)-2-(4-hydroxyphenoxy)propionic acid (HPOPA) is a key intermediate for the preparation of aryloxyphenoxypropionic acid herbicides (R-isomer). In order to improve the HPOPA production from the substrate (R)-2-phenoxypropionic acid (POPA) with Beauveria bassiana CCN-A7, static cultivation and H₂O₂ addition were attempted and found to be conducive to the task at hand. This is the first report on HPOPA production under static cultivation and reactive oxygen species (ROS) induction. On this premise, the cultivation conditions and fermentation medium compositions were optimized. As a result, the optimal carbon source, organic nitrogen source, and inorganic nitrogen source were determined to be glucose, peptone, and ammonium sulfate, respectively. The optimal inoculum size and fermentation temperature were 13.3% and 28℃, respectively. The significant factors including glucose, peptone, and H₂O₂, identified based on Plackett-Burman design, were further optimized through Central Composite Design (CCD). The optimal concentrations were as follows: glucose 38.81 g/l, peptone 7.28 g/l, and H₂O₂ 1.08 g/l/100 ml. Under the optimized conditions, HPOPA titer was improved from 9.60 g/l to 19.53 g/l, representing an increase of 2.03-fold. The results obtained in this work will provide novel strategies for improving the biosynthesis of hydroxy aromatics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.161.2-161.2
• /
• 2015

Melanin is a black pigment, responsible for hair and skin color. In order to find the melanin stimulatory technique which prove useful for a gray and a white hair-preventive agent or tanning agent, we developed atmospheric pressure plasma jet (APPJ) and tested for tyrosinase activity and melanin production in melanoma (B16F10) cells in vitro. We found plasma dose dependent increase in melanin production. To explore the contributing mechanism in melanin synthesis, intracellular reactive oxygen species (ROS) and MAP kinase signaling pathways were studied. Furthermore, the development of plasma technology for melanin synthesis and planning for in-vivo future studies will be discussed.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.369-369
• /
• 2006

Compatibilizers contribute to many processes in polymer industry, such as manufacturing polymer blends and composites. They are usually designed to be block or graft form which is combined in polar and non-polar parts in the first synthesis process level, for example, the general form of maleic anhydride (MA) as a compatiblizer is a grafted counterpart. However, the process of making the compatibilizer is related to the first synthesis level and it has some problems, such as high cost, poor processability, limitation on use and properties, and so on. So, in order to improve its poor processability and overcome the limitation on use, we developed compatibilizers which have various chemical forms by high intensity ultrasound and super critical fluid nitrogen in polymer melt reactive extrusion.

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.222-226
• /
• 1998

$Cu_3N$ film deposited on silicon oxide substrate by r.f. reactive sputtering technique. Synthesis and properties of copper nitride film were investigated for its possible application to Cu metallization as adhesive interlayer between copper and $SiO_2. Cu_3N$ film was synthesized at the substrate temperature ranging from $100^{\circ}C$ to $200^{\circ}C$ and at nitrogen gas ratio above $X_{N2}=0.4. Cu_3N, CuN_x$, and FGM-structured $Cu/CuN_x$ films prepared in this work passed Scotch-tape test and showed improved adhesion property to silicon oxide substrate compared with Cu film. Electrical resistivity of copper nitride film had a dependency on its lattice constant and was ranged from 10-7 to 10-1 $\Omega$cm. Copper nitride film was, however, unstable when it was annealed at the temperature above $400^{\circ}C$.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.329-329
• /
• 2006

Various new active ester monomers based on (meth)acrylates and 4-vinylbenzoic acid have been prepared. Investigation of the controlled radical polymerization behavior of the respective monomers resulted in excellent polymerization control, thus, opening synthetic routes to reactive block copolymers. Polymer analogous reactions with amines yielded functional polymers. In the case of the copolymer poly(N-isopropylacrylamide-co-acetone oxime acrylate) a lower critical solution temperature could be measured at $52^{\circ}C$. Thus, the reactive copolymer features two characters: reactive AND stimuliresponsive behavior.

• 정보과학회지
• /
• 제30권2호
• /
• pp.22-28
• /
• 2012

• Macromolecular Research
• /
• 제11권3호
• /
• pp.202-205
• /
• 2003

The reactive precursors, vinyl ethers, and epoxy-silicones, were synthesized. The vinyl ether monomers were prepared from primary alcohol and ethyl vinyl ether with mercury (II) acetate. The epoxy-functionalized silicones have been achieved by the controlled, rhodium-catalyzed, chemoselective hydrosilation of vinyl ether with siloxanes or silane. It was shown that the hydrosilation proceeds exclusively at the vinyl ether group of alkenyl vinyl ether without participation at the alkenyl group. The photoinduced cationic polymerization of these monomers was studied and found to be all highly reactive.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2289-2294
• /
• 2021

In the present study, an original spark plasma sintering-reactive synthesis (SPS-RS) method for minerallike ceramic materials based on SrAl₂Si₂O₈ feldspar-like skeleton structure was used for the first time, promising solid-state matrices for reliable immobilization of high-energy ⁹⁰Sr. The method is based on the "in-situ" reaction of a mixture of SrO, Al₂O₃ and SiO₂ oxides when heated by a unipolar pulsed current under compacting pressure. The phase and elemental composition structure were studied. The dynamics of the consolidation of the reaction mixture of oxides was studied in the range of 900-1200 ℃. The study found the temperature of the high-speed (minutes) SPS-RS formation of single-phase SrAl₂Si₂O₈ composition ceramic in the absence of intermediate reaction products with a relative density of up to 99.2% and compressive strength up to 145 MPa and a strontium leaching rate of 10^-4g/cm²·day.

• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.953-957
• /
• 1998

The effects of catalysts and reactive conditions on the synthesis of aluminum alkoxides are investigated. HgCl2 and I2 as catalysts are used in the synthesis reaction for comparing to no addtion. The absorption peak in IR spectra according to Al-O-L bond of aluminum isopropoxide and aluminum sec-butoxide appear at near 1030cm-1 and 1060cm-1 respectively regardless of kinds of catalysts. The synthesis yield of alu-minum-isopropoxide was 90% in case of no catalyst addition and increased to all of 95% by addition of HgCl2 and I2 The synthesis yield of aluminum sec-butoxide is increased to 95% by addition of I2 catalyst com-paring to no addition.