• ALGAE
• /
• 제29권4호
• /
• pp.311-319
• /
• 2014

The biocide sodium hypochlorite (NaOCl) is widely used for controlling algal growth, and this application can be extended to marine environments as well. This study evaluates the biocidal efficiency and cellular toxicity of NaOCl on the harmful dinoflagellate Cochlodinium polykrikoides, with emphasis on pigment production and antioxidant enzyme activity. The test organism showed dose-dependent decrease in growth rate on exposure to NaOCl, and the 72 h $EC_{50}$ was measured to be $0.584mg\;L^{-1}$. NaOCl significantly decreased pigment levels and chlorophyll autofluorescence intensity, indicating possible detrimental effects on the photosystem of C. polykrikoides. Moreover, it significantly increased the activities of antioxidant enzymes, suggesting the production of reactive oxygen species in the cells. These data indicate that NaOCl exerted deleterious effects on the photosynthetic machinery and induced oxidative damage in the dinoflagellate and this biocide could be effectively used for the control of algal blooms.

• 한국토양비료학회지
• /
• 제8권3호
• /
• pp.113-119
• /
• 1975

Volcanic Ash Soils are widely distributed in Jeju island, and constitute the important upland soils which are either presently being cultivated or are suitable for reclaiming. The characteristics of Volcanic Ash Soils according to data made available by previous studies in Jeju and the outside of the country are as following: The most conspicuous mineralogical property is the presence of amorphous mineral colloids. The colloids have large and highly reactive surface to which the common physical and chemical properties are related. Soils are low in bulk density and higher both in porosity and permeability. Accumulation of humus in the upper part of soil is found in great quantity. Cation exchange capacity is high mainly due to high humus content, but the absorbing intensity of ammonium and potassium is weaker than that of crystalline clays. The phosphate absorption coefficient is extremely high and deficiency of minor element may occur both crops and animals. Soils are densely populated with actinomycetes and anaerobic bacteria. Nitrification and activity of urease are distinctly stronger than that of non-Volcanic Ash Soils.

• 전기학회논문지P
• /
• 제62권2호
• /
• pp.79-83
• /
• 2013

An electronic ballast and magnetic ballast are two major types of ballasts used in HID(High Intensity Discharge) lamp. Compared with magnetic ballasts which can last for over 30 years and are recyclable at the end of their long lifetime, electronic ballasts have very short lifetimes due to the use of the electronic devices. In this paper, we developed a magnetic ballast for dual lamps and analyzed electrical characteristics and efficiency. As the experimental results, we confirm that the magnetic ballast for dual lamps makes it possible to effectively reduce current, active and reactive powers than conventional ballast.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.30-31
• /
• 2000

400DPI LED array was fabricated by using reactive ion etching(RIE) method. Material of fabricated LED array was used the GaP for green light emitting and had a homojunction structure. Each cells of emitting area in the LED array were defined with RIE etching for electrical isolation between cells. Electrodes were formed on each cells to emit independently. Ohmic contact resistivity was approximate 1.2$\times$10$^{5}$ $\Omega$/$\textrm{cm}^2$ and 1.26$\times$10$^{5}$ $\Omega$/$\textrm{cm}^2$ using isothermal annealing at 38$0^{\circ}C$ and 43$0^{\circ}C$. Emitting intensity of each etmitting cell was 1.65 cd/$m^2$.

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.29-34
• /
• 1985

The IR spectra of he heavy metal fluoride glasses showed peaks at $1, 400cm^{-1}$ or $1, 100cm^{-1}$ due to metal oxyfluoride impurities. The intensity of this band and hence the oxide impurity content of the glass could be reduced considerably by the use of reactive atmosphere melting under $CCl_4$ In comparison with the fundamental IR absorption band of heavy metal oxides the oxide impurity bands observed in the heavy metal fluoride glasses are multiphonon bands due to a 2-phonon absorption process. The envelope of the a vs. v curve beyond thue fundamental region shows the exponential fall off of a with increasing v-typical of intrinsic multiphonon absorption. In the multiphonon region the amount of structure is intermediate between that observed for covalent solids and that for ionic solids.

• 한국식생활문화학회지
• /
• 제14권5호
• /
• pp.467-476
• /
• 1999

We studied to improve the functional properties of soybean protein isolate by dimethylglutarylation and acetylation. Soybean protein isolate was acylated rapidly up to 80% modification and more of 80% modification was proceed slowly. Electrophoretic analysis showed that more changes in modified protein. Also, modification of soybean protein produced more ionizable tyrosines and exposed more hydrophobic groups, while modified protein exhibited a loss of reactive sulfhydryl groups. Spectrophoretic studies demonstrated that the shift was occurred at the UV 278nm and fluorescence 333nm, respectively, and the intensity decreased as the degree of modification was increased.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.716-722
• /
• 2003

ZnO thin films were deposited on Al and Pt electrodes by an RF reactive sputtering system for the fabrication of FBAR (film bulk acoustic wave resonator), and the effect of thermal treatment temperature on their c-axis preferred orientation was investigated. SEM experiments show that columnar structure of ZnO thin films were grown with c-axis normal to electrode material, and XRD experiments show that both ZnO films were grown with (002) plane preferred orientation, but larger diffraction peak was observed with Pt electrode. The peak intensity increased with higher thermal treatment temperature, but c-axis preferred orientation was diminished. The surface roughness of Al thin film was higher than that of Pt, and these affect the surface roughness of ZnO film deposited on the electrode. Though the preferred orientation with respect to Pt(111) plane was improved with higher thermal treatment temperature, this could not improve the c-axis orientation of ZnO film.

• Structural Engineering and Mechanics
• /
• 제55권1호
• /
• pp.93-109
• /
• 2015

Finite element analysis (FEA) combined with the concepts of linear elastic fracture mechanics (LEFM) provides a practical and convenient means to study the fracture and crack growth of materials. In this paper, a numerical modeling of crack propagation in the cement mantle of the reconstructed acetabulum is presented. This work is based on the implementation of the displacement extrapolation method (DEM) and the strain energy density (SED) theory in a finite element code. At each crack increment length, the kinking angle is evaluated as a function of stress intensity factors (SIFs). In this paper, we analyzed the mechanical behavior of cracks initiated in the cement mantle by evaluating the SIFs. The effect of the defect on the crack propagation path was highlighted.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.464-466
• /
• 2000

AIN thin films have been prepared by reactive sputtering method, using facing targets sputtering system with a DC power supply which can deposit a high quality thin film and control deposition condition in all range of nitrogen. The crystallographic characteristics of AIN thin films on N$_2$/Ar ratio was investigated by alpha-step and X-ray diffraction. As a result, the AIN film deposited at the pressure ratio of the nitrogen of 30% revealed strong X-ray diffraction intensity under substrate temperature 25$^{\circ}C$ and applied current 0.4A.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.34-35
• /
• 2000

A Y-branch phase modulator made of an electro-optic(EO) polymer has been designed and fabricated. An EO polymer, PMMA-DR1, is used for the core layer, and UV-curable polymers, UV-15 and UV-15 LV, for the cladding layers. The rib type polymeric waveguides are fabricated by the reactive ion etching method and their EO effects are obtained by the poling process. The optical properties of the fabricated phase modulator are as follows: the halfwave voltage, $V_{\pi}$, is 25 V, the insertion loss of TM mode is 13.8 dB, and the intensity modulation is 0.17 % (V).