• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3795-3799
• /
• 2013

The second-order rate constants ($k_N$) have been measured spectrophotometrically for nucleophilic substitution reactions of Y-substituted-phenyl 2-methylbenzoates (6a-e) with a series of cyclic secondary amines in MeCN at $25.0{\pm}0.1^{\circ}C$. Comparison of the $k_N$ values for the reactions of 4-nitrophenyl 2-methylbenzoate (6d) with those reported previously for the corresponding reactions of 4-nitrophenyl 2-methoxybenzoate (5) reveals that 6d is significantly less reactive than 5, indicating that modification of 2-MeO in the benzoyl moiety of 5 by 2-Me (i.e., $5{\rightarrow}6d$) causes a significant decrease in reactivity. This supports our previous report that aminolysis of 5 proceeds through a six-membered cyclic intermediate, which is highly stabilized through intramolecular H-bonding interactions. The Br${\o}$nsted-type plot for the reactions of 6d with a series of cyclic secondary amines is linear with ${\beta}_{nuc}=0.71$, which appears to be a lower limit of ${\beta}_{nuc}$ for a stepwise mechanism with breakdown of an intermediate ($T^{\pm}$) being rate-determining step (RDS). The Br${\o}$nsted-type plot for the reactions of 6a-e with piperidine is curved, i.e., the slope of Br${\o}$nsted-type plot (${\beta}_{lg}$) decreases from -1.05 to -0.41 as the leaving-group basicity decreases. The nonlinear Br${\o}$nsted-type plot has been taken as evidence for a stepwise mechanism with a change in RDS (e.g., from the $k_2$ step to the $k_1$ process as the leaving-group basicity decreases). Dissection of $k_N$ into the microscopic rate constants associated with the reactions of 6a-e with piperidine (e.g., $k_1$ and $k_2/k_{-1}$ ratio) also supports the proposed mechanism.

• 한국진공학회지
• /
• 제6권1호
• /
• pp.9-19
• /
• 1997

본 연구에서는 실리콘 웨이퍼 표면에 존재하는 미량의 Zn, Fe, Ti 금속 오염물들이 UV-excited chlorine radical을 이용한 건식세정 방법으로 제거되는 반응과정을 찾아내고자 하였다. 실리콘 웨이퍼 상에 진공증착법으로 원형패턴이 있는 Zn, Fe, Ti 박막을 증착시켜 상온 및 $200^{\circ}C$에서 UV/$Cl_2$세정하였을 때, 염소 래디컬($Cl^*$)이 Fe, Zn, Ti와 반응하여 제거되 는 것을 반응 전후 광학현미경과 SEM을 통해 표면 형상 변화를 관찰하였고, in-line으로 연결된 XPS를 통해서 반응 후 웨이퍼 표면에 남아있는 화합물의 화학적 결합상태를 관찰 하였으며, UV/$Cl_2$ 세정 후 실리콘 기판이 손상받는 정도를 알기 위해 AFM으로 표면 거칠 기를 측정하였다. 광학현미경과 SEM의 분석 결과에 의하면 Zn와 Fe는 쉽게 제거되는 반면 염화물을 형성하기 보다는 휘발성이 적은 산화물을 형성하는 경향이 강한 Ti은 약간만 제 거되는 것을 확인하였다. XPS분석을을 통해서 이들 금속 오염물들이 chlorine radical과 반 응하여 웨이퍼 표면에 금속 염화물을 형성하고 있는 것을 확인하였고, UV/$Cl_2$세정처리를 하였을 때 실리콘 웨이퍼의 표면 거칠기가 약간 증가하는 것을 알 수 있었다. 지금까지의 결 과를 볼 때, 습식세정과 UV/$Cl_2$건식세정을 병행하면 플라즈마 및 레이저를 사용하는 다른 건식세정 방법에 비하여 보다 저온에서 실리콘 기판의 큰 손상 없이 비교적 용이하게 금속 오염물을 제거할 수 있음을 제안 하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.27-27
• /
• 2011

For the design of real applicable molecular devices, current-voltage properties through molecular nanostructures such as metal-molecule-metal junctions (molecular junctions) have been studied extensively. In thiolate monolayers on the gold electrode, the chemical bonding of sulfur to gold and the van der Waals interactions between the alkyl chains of neighboring molecules are important factors in the formation of well-defined monolayers and in the control of the electron transport rate. Charge transport through the molecular junctions depends significantly on the energy levels of molecules relative to the Fermi levels of the contacts and the electronic structure of the molecule. It is important to understand the interfacial electron transport in accordance with the increased film thickness of alkyl chains that are known as an insulating layer, but are required for molecular device fabrication. Thiol-tethered RuII terpyridine complexes were synthesized for a voltage-driven molecular switch and used to understand the switch-on mechanism of the molecular switches of single metal complexes in the solid-state molecular junction in a vacuum. Electrochemical voltammetry and current-voltage (I-V) characteristics are measured to elucidate electron transport processes in the bistable conducting states of single molecular junctions of a molecular switch, Ru(II) terpyridine complexes. (1) On the basis of the Ru-centered electrochemical reaction data, the electron transport rate increases in the mixed self-assembled monolayer (SAM) of Ru(II) terpyridine complexes, indicating strong electronic coupling between the redox center and the substrate, along the molecules. (2) In a low-conducting state before switch-on, I-V characteristics are fitted to a direct tunneling model, and the estimated tunneling decay constant across the Ru(II) terpyridine complex is found to be smaller than that of alkanethiol. (3) The threshold voltages for the switch-on from low- to high-conducting states are identical, corresponding to the electron affinity of the molecules. (4) A high-conducting state after switch-on remains in the reverse voltage sweep, and a linear relationship of the current to the voltage is obtained. These results reveal electron transport paths via the redox centers of the Ru(II) terpyridine complexes, a molecular switch.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.601-610
• /
• 2007

Statement of problem: The adhesion between titanium and ceramic is less optimal than conventional metal-ceramic bonding, due to reaction layer form on cast titanium surface during porcelain firing. Purpose: This study characterized the effect of titanium-ceramic adhesion after gold and TiN coating on cast and wrought titanium substrates. Material and method: Six groups of ASTM grade II commercially pure titanium and cast titanium specimens$(13mm{\times}13mm{\times}1mm)$ were prepared(n=8). The conventional Au-Pd-In alloy served as the control. All specimens were sandblasted with $110{\mu}m\;Al_2O_3$ particles and ultrasonically cleaned for 5min in deionized water and dried in air before porcelain firing. An ultra-low-fusing dental porcelain (Vita Titankeramik) was fused on titanium surfaces. Porcelain was debonded by a biaxial flexure test at a cross head speed of 0.25mm/min. The excellent titanium-ceramic adherence was exhibited by the presence of a dentin porcelain layer on the specimen surface after the biaxial flexure test. Area fraction of adherent porcelain (AFAP) was determined by SEM/EDS. Numerical results were statistically analyzed by one-way ANOVA and Student-Newman-Keuls test at ${\alpha}=0.05$. Results: The AFAP value of cast titanium was greatest in the group 2 with TiN coating, followed by group 1 with Au coating and the group 3 with $Al_2O_3$ sandblasting. Significant statistical difference was found between the group 1, 2 and the group 3 (p<.05). The AFAP value of wrought titanium was greatest in the group 5 with TiN coating, followed by the group 4 with Au coating and the group 6 with $Al_2O_3$ sandblasting. Conclusion: No significant difference was observed among the three groups (p>.05). The AFAP values of the cast titanium and the wrought titanium were similar. However the group treated with $Al_2O_3$ sandblasting showed significantly lower value (p<.05).

• Macromolecular Research
• /
• 제10권3호
• /
• pp.158-167
• /
• 2002

In order to endow with new bioactive functionality from small intestine submucosa (SIS) powder as natural source to poly (L-lactide) (PLA) and poly (lactide-co-glycolide) (PLGA) synthetic biodegradable polymer, porous SIS/PLA and SIS/PLGA as natural/synthetic composite scaffolds were prepared by means of the solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. A uniform distribution of good interconnected pores from the surface to core region was observed the pore size of 40~500 ${\mu}{\textrm}{m}$ independent with SIS amount using the solvent casting/salt leaching method. Porosities, specific pore areas as well as pore size distribution also were almost same. After the fabrication of SIS/PLA hybrid scaffolds, the wetting properties was greatly enhanced resulting in more uniform cell seeding and distribution. Five groups as PGA non-woven mesh without glutaraldehyde (GA) treatment, PLA scaffold without or with GA treatment, and SIS/PLA (Code No.3 ; 1 : 12 of salt content, (0.4 : 1 of SIS content, and 144 ${\mu}{\textrm}{m}$ of median pore size) without or with GA treatment were implanted into the back of nude mouse to observe the effect of SIS on the induction of cells proliferation by hematoxylin and eosin, and von Kossa staining for 8 weeks. It was observed that the effect of SIS/PLA scaffolds with GA treatment on bone induction are stronger than PLA scaffolds, that is to say, in the order of PLA/SIS scaffolds with GA treatment > PLA/SIS scaffolds without GA treatment > PGA nonwoven > PLA scaffolds only with GA treatment = PLA scaffolds only without GA treatment for the osteoinduction activity. The possible explanations are (1) many kinds of secreted, circulating, and extracellular matrix-bound growth factors from SIS to significantly affect critical processes of tissue development and differentiation, (2) the exposure of SIS to GA resulted in significantly calcification, and (3) peri-implant fibrosis due to covalent bonding between collagen molecule by crosslinking reaction. In conclusion, it seems that SIS plays an important role for bone induction in SIS/PLA scaffolds for the application of tissue engineering area.

• 전기화학회지
• /
• 제7권4호
• /
• pp.173-178
• /
• 2004

플라즈마 화학 기상 증착법으로 구리 막$(foil,\;35{\mu}m)$표면 위에 $SiH_4$와 Ar혼합가스를 공급하여 실리콘 박막을 증착 한 후 리튬 이온전지의 음극으로 활용하였다. 증착 온도에 따라 비정질 실리콘 박막과 copper silicide박막 형태의 다른 두 종류의 실리콘 박막 구조가 형성되는 것이 관찰되었다. $200^{\circ}C$ 이하의 온도에서는 비정질 실리콘 박막이 증착되었고, $400^{\circ}C$ 이상의 온도에서는 실리콘 라디칼과 확산된 구리 이온의 반응에 의한 그래뉼러 형태의 copper silicide박막이 형성되었다. 비정질 실리콘 박막은 copper silicide박막 보다 높은 용량을 나타냈으나 충·방전 반응에 의한 급격한 용량 손실을 나타냈다. 이것은 비정질 실리콘 박막의 부피 팽창에 의한 것으로 추정된다. 그러나 copper silicide 박막을 음극으로 사용했을 때는 copper silicide를 형성한 실리콘과 구리의 화학결합이 막 구조의 부피변화를 감소 시켜줄 뿐 아니라 낮은 전기 저항을 갖기 때문에 싸이클 특성이 향상되었다.

• 대한화학회지
• /
• 제53권5호
• /
• pp.553-559
• /
• 2009

Metal organic frameworks (MOF)과 유사하게 금속과 유기물로 이루어진 골격 물질 중 제올라이 트와 유사한 구조를 갖는 zeolitic imidazolate framework (ZIF)를 처음으로 마이크로파(MW)를 이용하여 합성하였다. ZIF 중 잘 알려진 ZIF-8을 전통적인 전기 가열(CE)과 마이크로파 조사로 합성하였으며 ZIF-8은 $140{\sim}180^{\circ}C}$의 범위에서 용이하게 얻을 수 있었다. MW 합성에 의해 ZIF-8을 신속 하게 합성할 수 있었으며 결정 크기는 전통적인 합성에 비해 전반적으로 감소하였다. $140{^{\circ}C}$에서의 합성 결과 전통 적인 합성에 비해 MW에 의해 약 5배의 반응 속도가 증가함을 알 수 있었고 4시간 이내에 합성 반응이 종료됨을 알 수 있었다. MW로 얻어진 ZIF-8은 CE에 의한 ZIF-8에 비해 증가된 표면적과 세공부피를 가 졌다. 얻어진 모든 ZIF-8은 질소 흡착 실험 결과 type-I 흡착 등온선을 보였고 미세 세공을 가짐을 알 수 있었다. FTIR 및 TGA 결과 두 방법으로 얻어진 ZIF-8은 서로 유사한 결합 및 열적 특성을 보였다.

• Nuclear Engineering and Technology
• /
• 제13권3호
• /
• pp.145-152
• /
• 1981

산화제 첨가없이 고온동위원소 교환법으로 오르토 요오도히퓨린산(OIH)을 방사성요오드로 표지하면 효과적이라고 하나 그 교환메카니즘은 불확실하였다. 본 연구에서는 OIH와 $^{125}$/ $I^{-}$ 및 OIH와 $^{125}$/ $I_2$사이의 동위원소 교환반응을 두 다른 온도에서 진행시켜 교환속도 상수와 활성화파라미터들을 방사종이 크로마토그래피법으로 측정함으로써 반응속도론적으로 고찰하였다. OIH표지반응 때의 부산물로 알려진 오르토요오도벤조산(OIB)에 대해서도 같은 방범으로 진행시켰던바 교환속도 상수가 큰 순서는 OIB...$^{125}$/ $I^{-}$>OIB...$^{125}$/ $I_2$>OIH..$^{125}$/ $I^{-}$>OIH...$^{125}$/ $I_2$이었고 OIH의 활성화 파라미터가 일반적으로 OIB의 그것들보다 컸다. ($\Delta$H$\neq$$_{OIH}$>$\Delta$H$\neq$$_{OIB}$, $\Delta$S$\neq$$_{OIH}$>$\Delta$S$\neq$$_{OIB}$). 조건에 따라서는 친전자적 교환메카니즘도 가능하겠으나 위의 결과는 고온 교환반응에서 친핵적 교환메카니즘이 압도적임을 말해주었다. 그와같은 원인은 OIH의 CONHC $H_2$COOH의 오르토치환기 효과에 의한 수소결합형 전이상태 생성이 용이하기 때문이라고 보았다. 따라서 고온 교환법은 환원제가 함유되지 않은 $^{131}$ I가 생산되지 않는 작은 연구기관에서의 Hippuran표지 화합물 제조에 효과적임을 알수 있었다. 알수 있었다.

• 대한화장품학회지
• /
• 제43권4호
• /
• pp.373-379
• /
• 2017

재조합 대장균의 ${\beta}-galactosidase$ (${\beta}-gal$)을 이용하여 transgalactosylation 반응으로 1, 2-hexanediol galactoside (HD-gal) 합성을 수행하였다. 먼저, 합성 반응을 수행할 때의, ${\beta}-gal$의 양, 1, 2-hexanediol(HD)의 양, 반응 pH, 반응 온도 등 반응조건을 최적화하였다. ${\beta}-Gal$은 4.8 U/mL, HD는 75 mM, pH는 7.0, 온도는 $37^{\circ}C$의 조건이 최적 합성 조건이었으며, 이때, 약 96%의 HD가 HD-gal로 conversion 되었다. 그리고, 돼지 epidermis를 이용하여 HD와 HD-gal의 water holding capacity (WHC)를 비교 측정하여 보았는데, 이때, epidermis 표면에 HD와 HD-gal을 84.4, 126.6, 168.8, 211.0 mM을 처리하였으며, 84.4, 126.6, 168.8 mM의 HD와 HD-gal을 처리하였을 경우 HD-gal이 HD보다 더 큰 WHC 값을 보여 주었고, 168.8 mM의 경우에는 HD-gal이 HD와 비교하여 최대 약 20% 정도의 더 큰 WHC 값을 보여 주었다. 그러나, HD-gal의 MIC (minimal inhibitory concentration) 값을 측정해 본 결과, Enterococcus faecalis의 경우에는 HD의 MIC와 같았으나, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus의 경우에는 약 3배에서 10배까지 HD-gal의 MIC 값이 HD에 비하여 증가되는 현상이 관찰되었다. 결론적으로, HD의 transgalactosylation 반응으로 인하여 합성된 HD-gal의 보습력은 HD에 비하여 증가되고, HD-gal의 항균력은 HD와 비교하여 감소하는 현상을 관찰하였다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.197-212
• /
• 1998

The purpose of this study was to evaluate the effects of fluoride application on the aspect of shear bond strength of three aesthetic restorative materials to dentin. One light-cured composite resin(Palfique Esterite) and two light-cured glass ionomer cements(Fuji II LC and Compoglass)were used in this study. 120 permanent molars were used for this study. The teeth were extracted due to the origin of periodontal disease. The crowns of all teeth were removed, and the remaining roots were embedded in epoxy resin. The mesial or distal surfaces of roots were ground flat to expose dentin and polished on wet 320-, 400-, and 600 grit SIC papers for a total of 120 prepared flat root dentin surfaces. The prepared samples were divided into six groups. Group 1, 3, and 5 were control groups and group 2, 4, and 6 were experimental groups. Sixty samples for experimental groups were treated with 2% NaF solution for 5 minutes. Group 1 and 2 were bonded with Plafique Esterite, group 3 and 4 were bonded with Fuji II LC, and group 5 and 6 were bonded with Compoglass. After 24 hours water storage at $37{\pm}1^{\circ}C$, all samples were subjected to a shear to fracture with Instron universal testing machine(No.4467) at 1.0 mm/min displacement rate. Dentin surfaces treated with each conditioners before bonding and interfacial layers between dentin and aesthetic restorative materials were observed under Scanning Electron Microscope(Hitachi S-2300) at 20Kvp. The data were evaluated statistically at the 95% confidence level with ANOVA test. The result were as follows; 1. Among the control groups, group 1 showed strongest bond strength and group 3 showed weakest. 2. Among the experimental groups, group 2 showed strongest bond strength and group 6 showed weakest. 3. Statistical analysis of the data showed that pretreatment of dentin with 2% NaF solution significantly decreased the bond strength of three aesthetic restorative materials to dentin(P<0.05). 4. SEM findings of fluoride treated dentin surfaces (2, 4, 6 group) demonstrated dentin surfaces covered with fluoridated reaction products. 5. Except group 4 and 6, resin tags were formed in all groups.