• The Korea Journal of Herbology
• /
• v.32 no.1
• /
• pp.55-62
• /
• 2017

Objectives : Crataegi Fructus has been used as traditional medicines for more digestion action, amenorrhea due to blood stasis, and hyperlipemia. The aim of this study was to compare of Crataegi Fructus in South Korea collected during three years according to the standards in monographs of the Korean Pharmacopoeia Eleventh edition (KP 11). Methods : Crataegi Fructus was carried out identification test (Qualitative reaction, Thin layer chromatography), heavy metal test, and total ash registered at KP. Add to we tested loss on dry, contents of ethanol-soluble extracts, and HPLC profiling. Results : Identification test (TLC) was on comparing with ursolic acid standard solution in $R_f$ value, all samples showed red purple spot ($R_f$ value 0.9). Ursolic acid spot in $R_f$ value 0.35 showed by changing mobile phase condition. Heavy metals showed contents for Pb, Cd, As, and Hg range of 0.0 ~ 0.5 ppm, 0.0 ~ 0.2 ppm, 0.0 ~ 0.3 ppm, and 0.0 ~ 0.1 ppm. Loss on drying was ranged from 5.5 to 11.9 %, total ash was between the range 2.7 ~ 4.0 %. Contents of ethanol-soluble extracts was ranged from 17.8 to 44.9 %. The content of chlorogenic acid was ranged from 0.0 to 0.1 % based on the chlorogenic acid standard curve. Conclusion : We have verified the current specification standard of Crataegi Fructus and standard that is not set. We hope that it will help the standardization of Crataegi Fructus.

• Journal of Korea Game Society
• /
• v.15 no.4
• /
• pp.93-110
• /
• 2015

This study aimed at identifying user recognition of the types and causes of online game trolling through in-depth interview with users of . Online game trolling refers to anti-social behaviors to do acts provoking other users to anger intentionally so induce their actual reaction in online games. Types of online game trolling contained flaming, griefing, unskilled player and lack of understanding on user's rule. And users are recognizing as problems that anonymity is excessively high in the game, a single game has undue significance, team play is given too much emphasis in a situation lacking in social cohesivenessk as the structural causes of trolling in . Accordingly, in order to decrease online game trolling, it is urgent to improve the game-structured layer causing trolling rather than regulate trollers only.

• Journal of the Korean Ceramic Society
• /
• v.46 no.5
• /
• pp.456-461
• /
• 2009

Chemical composition and status of chemical bonding of the YAG($Y_3Al_5O_{12}$) ceramics after the exposure to fluorine plasma have been investigated using X-ray photoelectron spectroscopy, with the analysis on its erosion behavior. On the surface, F showed the maximum content, decreasing with depth, meanwhile the cation composition remained almost constant, irrespective of the position. The peaks due to Y in the reaction layer consisted of two kinds, showing the Y-O and Y-F bonds. These surface modifications under fluorine plasma seem to promote the erosion of the YAG ceramics. Excess addition of $Al_2O_3$ or $Y_2O_3$ into stoichiometric YAG produced 2nd phases of $Al_2O_3$ and $YAlO_3$, respectively, resulting in the slight difference in the local erosion rates. But, the overall average erosion rate was not sensitive to such excess additions of $Al_2O_3$ or $Y_2O_3$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.1
• /
• pp.28-38
• /
• 2014

The organic-inorganic composite membrane in polymer exchange membrane fuel cells (PEMFCs) have several fascinating technological advantages such as a proton conductivity, thermal stability and mechanical properties. As the inorganic filler, silicon carbide (SiC) fiber have been used in various fields due to its unique properties such as thermal stability, conductivity, and tensile strength. In this study, composite membrane was successfully fabricated by modified-silicon carbide fiber. Modified process, as a novel process in SiC, takes reaction by phosphoric acid after oxidation process (generated homogeniusly $SiO_2$ layer on SiC fiber). The mechanical property which was conducted by tensile test of the 5wt% modified-$SiO_2@SiCf$ composite membrane was better than that of Aquivion casting membrane as well as ion cxchange capacity(IEC) and proton conductivity. In addition, the single cell performance was observed that the 5wt% modified-$SiO_2@SiCf$ composite membrane was approximately $0.2A/cm^2$ higher than that of a Aquivion casting electrolyte membrane and electrochemical impedance was improved with the charge transfer resistance and membrane resistance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.113-113
• /
• 2008

Cu CMP (Chemical Mechanical Planarization) has been used to remove copper film and obtain a planar surface which is essential for the semiconductor devices. Generally, it is known that chemical reaction is a dominant factor in Cu CMP comparing to Silicon dioxide CMP. Therefore, Cu CMP slurry has been regarded as an important factor in the entire process. This investigation focused on understanding the effect of corrosion inhibitor on copper surface and CMP results. Benzotriazole (BTA) was used as a corrosion inhibitor in this experiment. For the surface analysis, electrochemical characteristics of Cu was measured by a potentiostat and surface modification was investigated by X-ray photoelectron spectroscopy (XPS). As a result, corrosion potential (Ecorr) increased and nitrogen concentration ratio on the copper surface also increased with BTA concentration. These results indicate that BTA prevents Cu surface from corrosion and forms Cu-BTA layer on Cu surface. CMP results are also well matched with these results. Material removal rate (MRR) decreased with BTA concentration and static etch rate also showed same trend. Consequently, adjustment of BTA concentration can give us control of step height variation and furthermore, this can be applicable for Cu pattern CMP.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.7
• /
• pp.1470-1474
• /
• 2009

Thermal and photochemistry of methyl iodide ($CH_3I)\;adsorbed\;on\;D_2O$ ice film on Cu(111) at 100 K were studied using temperature-programmed desorption (TPD) time-of-flight mass spectrometry (TOF-MS), X-ray and ultraviolet photoelectron spectroscopies. On the basis of TPD, multilayer and monolayer $CH_3I$ molecules desorb from $D_2O$ ice layer at 120 and 130 K, respectively. Photo-irradiation at 100 K exhibits dramatic changes in the TPD and I $3d_{5/2}\;XPS\;of\;CH_3I$ on ice film, due to a dramatic dissociation of $CH_3I$. The dissociation is likely activated by solvated electrons transferred from the metal substrate during photo-irradiation. No other photo-initiated reaction products were found within our instrumental detection limit. During photo-irradiation, the $CH_3I$, $CH_3$ and I could be trapped (or solvated) in ice film by rearrangement (and self-diffusion) of water molecules. A newly appeared parent molecular desorption peak at 145 K is attributed to trapped $CH_3I$. In addition, the $CH_3$ and I may diffuse through ice and chemisorb on Cu(111), indicated by TPD and I $d_{5/2}$ XPS taken with photo-irradiation time, respectively. No molecular ejection was found during photo-irradiation at 100 K. The work functions for $CH_3I/Cu(111),\;D_2O/Cu(111)\;and\;CH_3I/D_2$O/Cu(111) were all measured to be about 3.9 eV, 1.0 eV downward shift from that of clean Cu(111).

• Advances in environmental research
• /
• v.1 no.1
• /
• pp.37-55
• /
• 2012

Here we show that perchlorate reduction during pitting corrosion of zero-valent titanium (ZVT) is likely caused by dissolved titanium species, especially Ti(II). Several possible mechanisms were suggested based on the literature and were evaluated based on experimental observations. Direct reduction of perchlorate on the bare metal of the ZVT electrode was thermodynamically infeasible due to the high anodic potential that was applied. Other potential mechanisms were considered such as reduction by small ZVT metal particles released from the electrode and direct reduction on the oxide layer of the electrode where potential was sufficiently reduced by a high ohmic potential drop. However, these mechanisms were not supported by experimental results. The most likely mechanism for perchlorate reduction was that during pitting corrosion, in which ZVT is partially oxidized to form dissolved ions such as Ti(II), which diffuse from the electrode surface and react with perchlorate in solution. This mechanism is supported by measurements of the dissolution valence and the molar ratio of ZVT consumed to perchlorate reduced (${\Delta}Ti(0)/{\Delta}ClO_4{^-}$). The results shown in this study demonstrate that ZVT undergoing pitting corrosion has the capability to chemically reduce perchlorate by producing dissolved Ti(II) and therefore, it has the potential to be applied in treatment systems. On the other hand, the results of this research imply that the application of ZVT undergoing pitting corrosion in treatment systems may not be feasible now due to several factors, including material and electricity costs and possible chloride oxidation.

• Membrane and Water Treatment
• /
• v.9 no.4
• /
• pp.211-220
• /
• 2018

Incorporating nano-materials in thin-film composite (TFC) membranes has been considered to be an approach to achieve higher membrane performance in various water treatment processes. This study investigated the rejection efficiency of three target compounds, i.e., reserpine, norfloxacin and tetracycline hydrochloride, by TFC membranes with different graphene oxide proportions. Graphene oxide (GO) was incorporated into the polyamide active layer of a TFC membrane via an interfacial polymerization (IP) reaction. The TFC membranes were characterized with FTIR, FE-SEM, AFM; in addition, the water contact angle measurements as well as the permeation and separation performance were evaluated. The prepared GO-TFC membranes exhibited a much higher flux ($3.11{\pm}0.04L/m2{\cdot}h{\cdot}bar$) than the pristine TFC membranes ($2.12{\pm}0.05L/m2{\cdot}h{\cdot}bar$) without sacrificing their foulant rejection abilities. At the same time, the GO-modified membrane appeared to be less sensitive to pH changes than the pure TFC membrane. A significant improvement in the anti-fouling property of the membrane was observed, which was ascribed to the favorable change in the membrane's hydrophilicity, surface morphology and surface charge through the addition of an appropriate amount of GO. This study predominantly improved the understanding of the different PA/GO membranes and outlined improved industrial applications of such membranes in the future.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.23-30
• /
• 1985

Keloids are abnormally healed skin wounds that develop in the subpapillary layer of the dermis. They are a lesion with wide, raised and deep scars. They exceed the original dimensions of the wound and grow mounds upon mounds of collagen in a pseudotumor fashion. Their treatment may take several forms such as surgery, intralesional injection of steroid, compression, superficial irradiation, and combination therapy. However, absolute method is nothing until now. Recently, the cryosurgery shows relatively good effect in treatment, so we tried the clinical experience with cryosurgery in the treatment of keloids. Material and methods: During the past 2 years, we treated 20 individuals of the keloids with severe itching and pain. The age ranged from 5 to 45 years old. Only 6 cases were biopsied before and after cryotherapy. The cryosurgery set we used was Toitu model CR 201 $N_2O$ gas (tip temperature is $-80^{\circ}C$) and was applied directly on the lesion about 4 to 5 minutes with slight compression. After cryosurgery in keloids, the following results were obtained: 1. It is both quick and easy method. 2. It causes little or no pain and no loss of blood. 3. Integumentary normalization is rapid. The new scar tissue is smaller, and more elastic and soft. 4. The pain, itching and paresthesia commonly associated with keloid is usually disappeared. 5. Other treatment can be used after cryosurgery. 6. Histologic picture after cryosurgery is similar with the result of steroid injection. 7. The mechanism of the cryosurgery in keloids is the result of the direct tissue destroying action and cryoimmunologic reaction.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.567-571
• /
• 2008

PEM Fuel Cell operation mode can be classified into dead-end mode or open mode by whether the outlet port is blocked or not. Generally, dead-end type fuel cell has some merits on the pressure drop and system efficiency because it can generate more power than the open type fuel cell due to high operating pressure condition. However, the periodic purging process should be done for removing water which is formed as product of a reaction in the gas diffusion layer. In this study, cathode side dead-end type operation has been conducted. Moreover, pulsating flow generator at the outlet of cathode side has been suggested for increasing the period to purge the formed water because the pulsating flow can make formed water scattered uniformly over the whole channel. As a result, the purging period with pulsation increased by 1.5-2 times longer than that without pulsating.