• Advances in Energy Research
• /
• v.4 no.3
• /
• pp.189-202
• /
• 2016

This work emphasized optimum production of biodiesel using non-edible Prunus armeniaca (Bitter Apricot) oil via transesterification collected from the high altitude areas of Himachal Pradesh, India. In this study the author produced biodiesel through the process of transesterification by using an alkali catalyst with alcohol (methanol and ethanol), under the varying molar ratio (1:6, 1:9, 1:12), variable catalyst percentage (1% and 2%) and temperature ($70^{\circ}C$, $75^{\circ}C$, $80^{\circ}C$, $85^{\circ}C$). Furthermore, a few strong base catalysts were used that includes sodium hydroxide, potassium hydroxide, sodium metal and freshly prepared sodium methoxide. After screening the catalyst, response surface methodology (RSM) in connection with the central composite design (CCD) was used to statistically evaluate and optimize the biodiesel production operation using NaOH as catalyst. It was found that the production of biodiesel achieved an optimum level biodiesel yield with 97.30% FAME conversion under the following reaction conditions: 1) Methanol/oil molar ratio: 1:6, 2) Reaction time: 3h, 3) Catalyst amount: NaOH 2 wt. %, and 4) Reaction temperature: $85^{\circ}C$. The experimental results showed that the optimum production and conversion of biodiesel through the process of transesterification could be achieved under an optimal set of reaction conditions. The biodiesel obtained showed appropriate fuel properties as specified in ASTM, BIS and En- standards.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.412-415
• /
• 2013

Palladium on carbon powder was prepared using 1-hexyl-3-methylimidazolium tetrafluoroborate, one of room temperature ionic liquids. The synthesized particles were tested as a hexafluoropropylene hydrogenation catalyst. Moreover, the hydrogenation was performed under various reaction conditions to develop an optimum reaction process. The catalyst prepared by more than 3 wt% of palladium and the unity mole ratio of ionic liquid to palladium precursor showed higher catalytic activity. For reaction conditions, the complete hexafluoropropylene (HFP) conversion was achieved at these conditions; the volume flow ratio of hydrogen to HFP was higher than 1.25 and $GHSV_{HFP}$ was lower than 50000 mL/g-h.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.2
• /
• pp.135-141
• /
• 1999

A synthesis of Dimer acid was studied from a tall oil fatty acid. Catalytic activity measured as reactant conversion in a autoclave reactor increase in accordance with the acidity. The optimization of process conditions were tested by an experimental design method. Optimization synthetic conditions of dimer acid and were reaction of tall oil fatty acid during 2 hour at $250^{\circ}C$, used of 7.3 wt% active clay and $1.2{\sim}1.4wt%$ water, and found reation pressure $8{\sim}9Kg/cm^2$. The maximum conversion rate was researched $74{\sim}76%$.

• Microbiology and Biotechnology Letters
• /
• v.23 no.4
• /
• pp.425-431
• /
• 1995

A kinetic model of the cyclodextrin formation in a heterogeneous enzyme reaction system using swollen extrusion starch as substrate was derived emphasing the structural features of extrusion starch. The degree of gelatinization, the ratio of accessible and inaccessible portion of extrusion starch, adsorption of CGTase on swollen starch, the structural transformation during reaction, and product inhibition caused by produced CDs were considered in deriving kinetic model. Various kinetic constants were also evaluated. The derived kinetic equation was numerically simulated, which result showed that the derived kinetic equations can be used to predict the experimental data reasonably well under the various experimental conditions. Kinetic model can be utilized for the optimization of enzyme reactor and the process development for CD production from swollen extrusion starch.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2000.10a
• /
• pp.181-188
• /
• 2000

The electrocatalytic reduction of NAD$^{＋}$ using diaphorase was studied. methyl viologen (MV$^{2＋}$) mediator between an electrode and the enzyme. Steady-state currents could be obtained under the conditions of slow scan rate, low MV$^{2＋}$concentration, and high NAD$^{＋}$ concentration as the electrode reaction was converted to an electrochemical-catalytic (EC') reaction. The biomecular rate constant for the reaction of the reduced methyl viologen with the oxidized diaphorase was estimated as 7.5$\times$10$^3$M$^{-1}$ s$^{-1}$ from the slope of the current versus [MV$^{2＋}$] plot. And the optimal concentrations of diaphorase, MV$^{2＋}$ and NAD$^{＋}$ in the mediated electrocatalytic reduction of NAD$^{＋}$ were decided by applying the cyclic voltammetry. The optimal concentrations of the species were obtained by finding the conditions which gave the highest and steady-state current at a gold-amalgam electrode. The highest and steady-state catalytic current was achieved under the conditions of 1.5 U/ml diaphorase, 0.2 mM MV$^{2＋}$, and 4.8 mM NAD$^{＋}$ at the scan rate of 2 mV s$^{-1}$ , suggesting that the rate of the electrocatalytic reation is the higest under the former conditions. The electrochemical procedure under the conditions of 1.5 U/ml diaphorase,0.2 mM MV$^{2＋}$, and 4.8 mM NAD$^{＋}$ was used favorably to drive an enzymatic reduction of pyruvate to D-lactate.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.2
• /
• pp.78-90
• /
• 2012

Soybean hull is an attractive feedstock for glucose production. To increase the glucose conversion in acid hydrolysis, a pretreatment method combined steam explosion with alkali pretreatment for soybean hull was studied. For first step pretreatment, steam explosion conditions (log Ro 2.45) were optimized to obtain maximum solid recovery and cellulose content. In the second step pretreatment, the conditions for potassium hydroxide pretreatment of steam exploded soybean hull were optimized by using RSM (response surface methodology). The optimum conditions for minimum lignin content were determined to be 0.6% potassium hydroxide concentration, $70^{\circ}C$ reaction temperature and 198 min reaction time. The predicted lignin content was 2.2% at the optimum conditions. Experimental verification of the optimum conditions gave the lignin content in similar value with the estimated value of the model. Finally, glucose conversion of pretreated soybean hull using acid hydrolysis resulted in $97.1{\pm}0.4%$. This research of two-step pretreatment was a promising method for increasing the glucose conversion in the cellulose-to-glucose process.

• Korean journal of food and cookery science
• /
• v.28 no.6
• /
• pp.655-663
• /
• 2012

This study was carried out response surface analysis for brown sauce optimization. Three factors of heating time (10, 20, 30, 40, and 50 min), the added gelatin content (0, 4, 8, 12, and 16%) and the added tomato paste amount (0, 6, 12, 18, and 24%) were encoded into 5 levels (-2, -1, 0, 1, 2). After the central synthesis plan was set up to produce samples in 16 pre-arranged conditions and the sensory tests were conducted, the investigation on optimum level of these factors was conducted. The scope of optimum conditions for extraction was established through reading the range of reaction surfaces superimposed between those representing sensory properties such as color, flavor, taste, viscosity and overall acceptability was established. In this study, it was found out that the scope of optimum conditions for brown sauce extraction was 30 min for heating time, 9.00% for gelatin content and 11.25% for tomato paste amount. The reliability test proved the mentioned scope to have a similar value to that of the estimated scope when compared to the experimental values which was observed through experiments conducted under the same conditions as applied to values predicted through RSM program, enabling the verification of the reliability of derived regression formula.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1243-1252
• /
• 2019

The purpose of this study is to investigate the optimum conditions of biomass pretreatment with potassium hydroxide (KOH) for efficient utilization of cellulose, hemicellulose and lignin from Miscanthus. The optimization of variables was performed by response surface methodology (RSM). The variation ranges of the parameters for the RSM were potassium hydroxide 0.2~0.8 M, reaction temperature 110~190℃ and reaction time 10~90 min. The optimum conditions of alkali pretreatment from Miscanthus were determined as follows: concentration of KOH 0.47 M, reaction temperature 134℃ and reaction time 65 min. At the optimum conditions, the yield of cellulose from the solid fraction after pretreatment was predicted to be 95% by model prediction. Finally, 66.1 ± 1.1% of cellulose were obtained by verification experiment under the optimum conditions. The order contents of solid extraction were hemicellulose 26.4 ± 0.4%, lignin 3.7 ± 0.1% and ash 0.5 ± 0.04%. The yield of ethanol concentration of 96% was obtained using separated saccharification and fermentation.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1045-1052
• /
• 2003

To develop a burnt beef flavor by reaction flavor technology, hydrolyzed vegetable protein (HVP) was reacted with precursors. Ribose, cysteine, furaneol, thiamin, methionine, garlic powder, and phospholipid were selected as suitable precursors for producing a burnt beef flavor. HVP and the selected precursors were reacted in a high pressure reactor to optimize reaction parameters, such as temperature, time, and water content. Optimum reaction conditions were $130^{\circ}C$, 1 hr, and 7.5% water addition. A burnt beef flavor was generated without pH adjustment. On the basis of an omission test, cysteine, furaneol, thiamin, and garlic powder were evaluated for optimization using response surface methodology. The optimum composition of precursore was determined to be 7.7% cysteine, 7.3% furaneol, 2.1% thiamin, and 6.9% garlic powder. Based on these results, optimum reaction conditions for the production of a burnt beef flavor from HVP were 5% ribose, 5% methionine, 5% phospholipid, 7.7% cysteine, 7.3% furaneol, 2.1% thiamin, 6.9% garlic powder, 7.5% water addition, $130^{\circ}C$ reaction temperature, and 1hr reaction time.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.10
• /
• pp.1523-1528
• /
• 2006

The optimization of a batch-type quartz crystal microbalance (QCM)-precipitation sensor measuring acetylcholinesterase (AChE) activity was conducted. To covalently bind AChE onto the gold electrode of a QCM surface, glutaraldehyde cross-linking to a cystamine self-assembled monolayer was tried at different cystamine concentrations. At the optimum conditions of the QCM-precipitation sensor, 0.1 M potassium phosphate buffer (pH 8.0), containing 0.01% Tween 80, was used as the reaction buffer, with the enzyme amount of 5 units for immobilization and the substrate concentration of 50 mg/ml. The current biosensor might find a future applicability to the sum parameter detection on organophosphorus and carbamate pesticides.