• Journal of Korean Neurosurgical Society
• /
• v.45 no.5
• /
• pp.284-288
• /
• 2009

Objective : Our retrospective study aimed to determine whether 16-slice computerized tomography (CT) angiography optimized sharp kernel is suitable for the evaluation of visibility, luminal patency and re-stenosis of intracranial stents in comparison with conventional angiography. Methods : Fifteen patients with symptomatic intracranial stenotic lesions underwent balloon expandable stent deployment of these lesions (10 middle cerebral arteries, 2 intracranial vertebral arteries, and 3 intracranial internal carotid arteries). CT angiography follow-up ranged from 6 to 15 months (mean follow-up, 8 months) after implantation of intracranial stents and conventional angiography was confirmed within 2 days. Curved multiplanar reformations with maximal intensity projection (MIP) with optimal window settings for assessment of lumen of intracranial stents were evaluated for visible lumen diameter, stent patency (contrast distal to the stent as an indirect sign), and re-stenosis by two experienced radiologists who blinded to the reports from the conventional angiography. Results : All of stents deployed into symptomatic stenotic lesions. All stents were classified as patent and no re-stenosis, which was correlated with results of conventional angiography. Parts of the stent lumen could be visualized in all cases. On average, 57% of the stent lumen diameter was visible using optimized sharp kernel. Significant improvement of lumen visualization (22%, p<0.01) was observed using the optimized sharp kernel compared with the standard sharp kernel. Inter-observer agreements on the measurement of lumen diameter and density were judged as good, respectively (p<0.05). Conclusion : Sixteen-slice CT using the optimized sharp kernel may provide a useful information for evaluation of lumen diameter patency, and re-stenosis of intracranial stents.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.24-28
• /
• 2000

This paper reports a new calculation method of three dimensional deposeition rate by level set method. To model an advancement of the surface efficiently, we have developed a new iteration method to re-initialize the level set function. For calculating etching and deposition rate by direct flow, we have developed a visibility test module and a refraction and re-sputtering model. Sputter deposition rate with shadow effect and surface refraction is calculated. We report that difference of profiles in cases that sticking coefficient are 1.0 and 0.3. We report that the difference of the deposition rate on bottom of the hole is caused by a difference of visible angle by the shadowing effect.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.259-261
• /
• 2016

Cable is very essential material for ship operation as connecting element for whole electrical facilities of ship. The material cost and installation man-hour increment caused by re-installation is unavoidable if cable route has some problem. The purpose of this study is to suggest methods to implement the cable visualization functionality for verifying whether cable route is accurate or not in design phase. This functionality is conducted by representing color of 3D model for strong visibility by refer to textual cable routing information. The electrical engineer can provide cable route information more accurate and on time for cable installation department. As a result, the material cost and installation man-hour reduce due to decreasing ratio of re-installation.

• The Journal of the Korea Contents Association
• /
• v.19 no.6
• /
• pp.632-643
• /
• 2019

This study is analysis how the competitive factors of fitness center's affect customer satisfaction and re-use intention. Accordingly, It surveyed fitness center customers in Pusan and Kyungnam, and analyzed amount 422 questionnaires with the SPSS WIN 23.0 and AMOS WIN 23.0 program, so it reached these conclusions. First, the accessibility of location characteristic showed that it had a relevant influence on the customer satisfaction, but the visibility didn't have a relevant influence on it. Second, the spatiality and convenience of the facility characteristic showed that they influenced customer satisfaction. Third, the responsiveness and professionalism of the service characteristic factor showed that they had a relevant influence on the customer satisfaction, but the reliability and empathy didn't have a relevant influence on it. Fourth, the customer satisfaction had a relevant influence on the reuse intention. According to this study, we found that the competition factor was bound up with the customer satisfaction and reuse intention. In the end, grasping customers' satisfaction and preferred utilization pattern should be reflected actively in the fitness center management.

• English & American cultural studies
• /
• v.18 no.2
• /
• pp.1-26
• /
• 2018

This paper aims to examine the performativity of street politics through Suffragette. The movie exposes the bloody violence of Britain government and shows the militant suffragettes and their resistance against it. It also deals with history and 'story'of labor class suffragettes for political rights. The paper shows how the movie is re-born as an indexical art and the street politics makes the plural performativity. Most of all, it reads the difference between the government's violence wielded as a power to suppress the suffragettes and bring them to their knees, and the suffragettes's violence having the resistant and emancipated revolution. We can realize that the suffragettes used the mode of visibility to expose its incompetence and make their emancipated violence into the indexical force. And we can see the variations of street politics from the acts of Davison, Maud, and Violet.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.204-210
• /
• 2019

In case of a fire inside a tunnel, unlike ordinary roads, it is very difficult for a driver to obtain visibility, and a large accident is highly likely to occur. In this study, the smoke behavior, visible distance, and CO concentration of a jet fan were analyzed using the NIST fire simulation (FDS). All analyses were set to HRRPUA (Heat Release Rate Per Area) 3.6MW/m and all the analysis times were set to 600s. In all analyses by CFD, the results were confirmed at y=30m and y=110m, and smoke behavior analysis, visible range analysis, and carbon monoxide concentration were confirmed according to the diameter and flow rate. As the size and flow rate of the jet fan increased, the visibility distance was high at y=30m, and the concentration of carbon monoxide was also confirmed to be 0 ppm. Therefore, proper setting of the jet fan diameter and flow rate will be an excellent solution for fires in tunnels, and taking refuge at upstream area of a re-ventilated fan can reduce the number of casualties.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.96-104
• /
• 2009

In this paper, we propose a no-reference objective Quality assessment metrics of image. The blockiness and blurring of edge areas which are sensitive to the human visual system are modeled as step functions. Blocking and blur metrics are obtained by estimating local visibility of blockiness and edge width, For the blocking metric, horizontal and vertical blocking lines are first determined by accumulating weighted differences of adjacent pixels and then the local visibility of blockiness at the intersection of blocking lines is obtained from the total difference of amplitudes of the 2-D step function which is modelled as a blocking region. The blurred input image is first re-blurred by a Gaussian blur kernel and an edge mask image is generated. In edge blocks, the local edge width is calculated from four directional projections (horizontal, vertical and two diagonal directions) using local extrema positions. In addition, the kurtosis and SSIM are used to compute the blur metric. The final no-reference objective metric is computed after those values are combined using an appropriate function. Experimental results show that the proposed objective metrics are highly correlated to the subjective data.

• The Journal of Society for e-Business Studies
• /
• v.15 no.1
• /
• pp.89-101
• /
• 2010

In some industries, manufacturing firms' distinctive competences include not only product superiority but also service excellence. For example, in a highly volatile and dynamic market, flexibility and responsiveness are more valued than just the product cost. And sales order processing, in that respect is a very important process. However, previous studies on sale order processing have considered only due-date assignments or dealt with production scheduling to minimize production cost or delivery lead time. Due to recent advances in information technology, a new approach is possible in dealing with sales order processing. For example, RFID(Radio Frequency IDentification) and ubiquitous computing technology adds real time visibility and traceability to supply chain. In this study, we develop a new due-date re-negotiation process for sales order management and propose a new business integration model to support the re-negotiation process based on RFID, ubiquitous computing technology and RosettaNet's PIPs.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.689-692
• /
• 1996

The environment surrounded by industries is represented by the 3Cs : Customers, Competition, and Changes. The 3Cs drive industries to pursue external business targets such as customer's needs and marketplaces with BPR (Business Process Reengineering). BPR addresses core business process. One of these core business processes is product development. This product development process has been reengineered by the concept of CE (Concurrent Engineering). The aim of the paper is to build frameworks of CE to clarify the CE concept. This paper begins with investigating the product development process from the perspectives of three drivers: cost, quality and speed. CE frameworks are then followed. The first frmework is concerned with the CE definition and thus three keyphrases are extracted : from the outset, concurrent design and systematic approach. Concerned with the CE implementation, the second framework is composed of five components: generalist & specialist, cross-function team, enabling tools & techniques, success metrics, and total visibility. This paper concludes that the CE practice is hard to achieve because of the 'dont't-tell-them-early' attitude of upstream people, and the 'wait-and-see' attitude of downstream people. As resolution, a change management program is recommended that changes an employees mind-set. This paper also supposes computer systems which facilitate and keep automatic track of the CE process as engineered. Finally it gives a warning that computer systems alone do not guarantee success without being preceded by process re-engineering.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.1
• /
• pp.94-97
• /
• 2015

In this study, we introduce a yellowing phenomenon in silver nanowire laser patterning and attempt to understand the cause of this phenomenon. Silver nanowire is a promising alternative to indium tin oxide as a transparent electrode owing to its flexibility. Additionally, silver nanowire can be easily patterned by laser ablation, which is free of dangerous chemicals. However, a yellowish color change reducing visibility is observed on the patterned area of the silver nanowires, and this yellowing phenomenon prevents the use of silver nanowire as a transparent electrode material. We concluded that resolidified debris of melted and evaporated silver nanowires after laser ablation causes the color change of the electrode. Further research is needed to determine a means of mitigating this yellowing phenomenon.