• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.735-741
• /
• 2018

In this paper, the surface recession of ablative materials was quantitatively analyzed using a high-speed camera and a three-dimensional profilometer. The ablation tests of the graphite and carbon/phenolic composite samples were performed using a 0.4 MW arc-heated wind tunnel for simulating the atmospheric re-entry environment. The real-time images during the ablation test were captured by the high-speed camera, and analyzed to calculate the surface recession and recession rate. Also, the surface data of samples were obtained using a three-dimensional profilometer, and the surface recession was precisely calculated from the difference of height between the surface data before and after the test. It is effective to complement the two measurement results in the comprehensive analysis of surface recession phenomena.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.681-688
• /
• 2021

This paper considers the trajectory and impact point dispersion analysis of the test launch vehicle (TLV). The analysis, which performed before and after its flight test on November 28, 2018, is described and verified by comparing with the flight test results. The six degree-offreedom (DOF) simulation is used to compute the dispersion of the trajectory, attitude, and impact point, where the launch vehicle performance variations and wind effects during the atmospheric phase are included. The impact area to guarantee the flight safety is determined using the results of the dispersion analysis. The flight test results confirm that the safe flight of TLV is performed within the predicted dispersion boundary.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.1037-1048
• /
• 2018

In this paper, we investigated the international guidelines and actual disposal maneuver cases to prepare KOMPSAT-2 post mission disposal. And then, disposal maneuver plan was established using current propellant of KOMPSAT-2 and verification was also performed to find out whether the international guidelines are satisfied. As a result, the lifetime of KOMPSAT-2 was 3.6 years when 45kg propellant was used to decrease perigee altitude to 300km. And if more than 14.5kg propellant consumed for same strategy, KOMPSAT-2 can satisfy the international guidelines. Finally, re-entry survivability analysis was performed and it represented that heat resistant objects, such as propellant tank and reaction wheel, could be survived but total ground casualty probability was less than international guidelines.

• Journal of Gastric Cancer
• /
• v.21 no.2
• /
• pp.132-141
• /
• 2021

Purpose: Intracorporeal esophagojejunostomy during reduced-port gastrectomy for proximal gastric cancer is a technically challenging technique. No study has yet reported a robotic technique for anastomosis. Therefore, to address this gap, we describe our reduced-port technique and the short-term outcomes of intracorporeal esophagojejunostomy. Materials and Methods: We conducted a retrospective review of patients who underwent a totally robotic reduced-port total or proximal gastrectomy between August 2016 and March 2020. We used an infra-umbilical Single-Site^® port with two additional ports on both sides of the abdomen. To transect the esophagus, a 45-mm endolinear stapler was inserted via the right abdominal port. The common channel of the esophagojejunostomy was created between the apertures in the esophagus and proximal jejunum using a 45-mm linear stapler. The entry hole was closed with a 45-mm linear stapler or robot-sewn continuous suture. All anastomoses were performed without the aid of an assistant or placement of stay sutures. Results: Among the 40 patients, there were no conversions to open, laparoscopic, or conventional 5-port robotic surgery. The median operation time and blood loss were 254 min and 50 mL, respectively. The median number of retrieved lymph nodes was 40.5. The median time to first flatus, soft diet intake, and length of hospital stay were 3, 5, and 7 days, respectively. Three (7.5%) major complications, including two anastomosis-related complications and a case of small bowel obstruction, were treated with an endoscopic procedure and re-operation, respectively. No mortality occurred during the study period. Conclusions: Intracorporeal esophagojejunostomy during reduced-port gastrectomy can be safely performed and is feasible with acceptable surgical outcomes.

• Journal of Space Technology and Applications
• /
• v.1 no.2
• /
• pp.149-159
• /
• 2021

This paper represents a reentry time prediction analysis of CZ-5B rocket-body in China, subject to analysis of the Inter-Agency Space Debris Coordination Committee Reentry (IADC) reentry test campaign conducted in May 2021. Predicting the reentry of space objects is difficult to accurately predict due to the lack of accurate physical information about target, and uncertainty in atmospheric density. Therefore, IADC conducts annual re-entry campaigns to verify analysis techniques by each agency, and the Korea Aerospace Research Institute has also participated in them since 2015. Ballistic coefficient estimation method proposed to predict target reentry time and the result confirmed the difference of 73 seconds, which confirms the accuracy of the proposed method.

• Journal of Chest Surgery
• /
• v.55 no.5
• /
• pp.364-377
• /
• 2022

An anatomical understanding of the atrial myocardium is crucial for surgeons and interventionists who treat atrial arrhythmias. We reviewed the anatomy of the inter-nodal and intra-atrial conduction systems. The anterior inter-nodal route (#1) arises from the sinus node and runs through the ventral wall of the atrial chambers. The major branch of route #1 approaches the atrioventricular node from the anterior aspect. Other branches of route #1 are Bachmann's bundle and a vestibular branch around the tricuspid valve. The middle inter-nodal route (#2) begins with a broad span of fibers at the sinus venarum and extends to the superior limbus of the oval fossa. The major branch of route #2 joins with the branch of route #1 at the anterior part of the atrioventricular node. The posterior inter-nodal route (#3) is at the terminal crest and gives rise to many branches at the pectinate muscles of the right atrium and then approaches the posterior atrioventricular node after joining with the vestibular branch of route #1. The branches of the left part of Bachmann's bundle and the branches of the second inter-nodal route form a thin myocardial network at the posterior wall of the left atrium. These anatomical structures could be categorized into major routes and side branches. There are 9 or more anatomical circles in the atrial chambers that could be structural sites for macro re-entry. The implications of normal and abnormal structures of the myocardium for the pathogenesis and treatment of atrial arrhythmias are discussed.

• Korean Journal of Materials Research
• /
• v.32 no.12
• /
• pp.553-559
• /
• 2022

In this work, the ablation behavior of monolith ZrB₂-30 vol%SiC (Z30S) composites were studied under various oxy-acetylene flame angles. Typical oxidized microstructures (SiO₂/SiC-depleted/ZrB₂-SiC) were observed when the flame to Z30S was arranged vertically. However, formation of the outmost glassy SiO₂ layer was hindered when the Z30S was tilted. The SiC-depleted region was fully exposed to air with reduced thickness when highly tilted. Traces of the ablated and island type SiO₂ were observed at intermediate flame angles, which clearly verified the effect of flame angle on the ablation of the SiO₂ layer. Furthermore, the observed maximum surface temperature of the Z30S gradually increased up to 2,200 ℃ proving that surface amorphous silica was continuously removed while monoclinic ZrO₂ phase began to be exposed. A proposed ablation mechanism with respect to flame angles is discussed. This observation is expected to contribute to the design of complex-shaped UHTC applications for hypersonic vehicles and re-entry projectiles.

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.4
• /
• pp.547-567
• /
• 2022

In this study, I focus on makerspaces, which have rapidly spread since the late 2000s in the world's major cities. Makerspaces, born amid great social change, reflect the core characteristics of industrial space. I analyze the makerspace based on the theoretical perspectives of urbanism in the macroscopic aspect and placeness in the microscopic aspect. The urbanism of makerspaces is manifested through entry into the inner cities and their connections with urban capabilities. This means that convergence with innovation factors is becoming more important than optimization of factor costs and agglomeration economies in the locational determinants of industrial space. The placeness of makerspaces is being re-formed through an emphasis on taste, the expansion of autonomy, and the strengthening of connections. This reveals how the value creation process within the industrial space is changing, from forming-placelessness through standardization, uniformity, and compartmentalization to forming-placeness through restoration of individual humanity and interaction. The results of the urbanism and placenesss analysis carry implications for the present moment, when it is necessary to diversify the spatial planning of industrial spaces.

• Journal of Korean Dental Science
• /
• v.17 no.2
• /
• pp.64-74
• /
• 2024

This case report presents the long-term radiographic outcomes of a novel approach for simultaneous lateral augmentation and implant surgery. A 60-year-old male patient who required tooth extraction of the maxillary central and lateral incisors due to trauma visited the clinic. After tooth extraction, severe horizontal and vertical deficiencies occurred owing to atrophy of the alveolar ridge, and a simultaneous guided bone regeneration (GBR) procedure was planned along with the installation of two implants. In the present case, a modification of the conventional 'sandwich technique' was used by placing the mixture of autogenous bone chips and xenografts at the outermost layer to maximize the osteogenic potential at the coronal part of augmentation while applying solely xenografts at the inner layer. To enhance volumetric stability, an autogenous block of periosteum harvested from the maxillary tuberosity was incorporated between the two layers. Cone-beam computed tomography was performed at baseline and 3 years after the surgery to compare radiographic outcomes. Dehiscence after fixture installation was successfully observed at the re-entry of the surgery site. Three years after the surgery, average horizontal bone gains of 6.11 mm and 4.12 mm were observed in the maxillary central and lateral incisor areas, respectively. Healthy peri-implant mucosa and well maintained marginal bone levels were observed 8 years after the surgery, meeting the criteria for implant success. The findings of this case suggest that a substantial amount of horizontal bone gain can be obtained with a layered approach using autogenous bone materials and xenografts, highlighting the advantages of incorporating autogenous blocks into the simultaneous GBR procedure.

• Clinical and Experimental Pediatrics
• /
• v.63 no.4
• /
• pp.141-145
• /
• 2020

Background: For children and adolescents with cancer, going back to school is a key milestone in returning to "normal life." Purpose: To identify the support vital for a successful transition, we evaluated the parents' needs and the challenges they face when their children return to school. Methods: This multi-institutional study was conducted by the Korean Society of Pediatric Hematology and Oncology. The written survey comprised 24 questions and was completed by 210 parents without an interviewer. Results: Most parents (165 of 206) reported that their children experienced difficulties with physical status (n=60), peer relationships (n=30), academic performance (n=27), emotional/behavioral issues (n=11), and relationships with teachers (n=4) on reentering school. Parents wanted to be kept informed about and remain involved in their children's school lives and reported good parent-teacher communication (88 of 209, 42.1%). Parents reported that 83.1% and 44.9% of teachers and peers, respectively, displayed an adequate understanding of their children's condition. Most parents (197 of 208) answered that a special program is necessary to facilitate return to school after cancer therapy that offers emotional support (n=85), facilitates social adaptation (n=61), and provides tutoring to accelerate catch up (n=56), and continued health care by hospital outreach and school personnel (n=50). Conclusion: In addition to scholastic aptitude-oriented programs, emotional and psychosocial support is necessary for a successful return to school. Pediatric oncologists should actively improve oncology practices to better integrate individualized school plans and educate peers and teachers to improve health literacy to aid them in understanding the needs of children with cancer.