• 제목/요약/키워드: Rayleigh-Taylor instability

검색결과 18건 처리시간 0.024초

화염 불안정성이 난류 예혼합 화염의 전파 특성에 미치는 영향에 관한 연구 (Influence of Flame Instabilities on Propagation Characteristics of Stagnating Turbulent Premixed Flames)

  • 권재성;허강열
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.287-288
    • /
    • 2012
  • DNS is performed to examine the propagation characteristics of stagnating turbulent premixed flames. Results show good agreement with the recently proposed relationship for turbulent burning velocity, $S_T$. It is shown that $S_T$ increases through a thinner flamelet, turbulence production and correlation between fluctuating velocity and buoyancy force respectively for diffusive-thermal, hydrodynamic and Rayleigh-Taylor instability. The mean curvature doesn't have significant effect on $S_T$ at the leading edge.

  • PDF

경계면 포착법에 의한 밀도차이에 따른 물질경계면을 갖는 다상유동 수치해석 (Numerical Simulation of Multiphase Flows with Material Interface due to Density Difference by Interface Capturing Method)

  • 명현국
    • 대한기계학회논문집B
    • /
    • 제33권6호
    • /
    • pp.443-453
    • /
    • 2009
  • The Rayleigh-Taylor instability, the bubble rising in both partially and fully filled containers and the droplet splash are simulated by an in-house solution code(PowerCFD), which are typical benchmark problems among multiphase flows with material interface due to density difference. The present method(code) employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method(CICSAM) in a volume of fluid(VOF) scheme for phase interface capturing. The present results are compared with other numerical solutions found in the literature. It is found that the present method simulates efficiently and accurately complex free surface flows such as multiphase flows with material interface due to both density difference and instability.

MULTI-HARMONIC MODELS FOR BUBBLE EVOLUTION IN THE RAYLEIGH-TAYLOR INSTABILITY

  • Choi, Sujin;Sohn, Sung-Ik
    • 대한수학회지
    • /
    • 제54권2호
    • /
    • pp.663-673
    • /
    • 2017
  • We consider the multi-harmonic model for the bubble evolution in the Rayleigh-Taylor instability in two and three dimensions. We extend the multi-harmonic model in two dimensions to a high-order and present a new class of steady-state solutions of the bubble motion. The growth rate of the bubble is expressed by a continuous family of two free parameters. The critical point in the family of solutions is identified as a saddle point and is chosen as the physically significant solution. We also present the multi-harmonic model in the cylindrical geometry and find the steady-state solution of the axisymmetric bubble. Validity and limitation of the model are also discussed.

경계면포착법에 의한 밀도차에 따른 다상유동 수치해석 (Numerical Simulation of Two-Dimensional Multiphase Flows due to Density Difference by Interface Capturing Method)

  • 명현국
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.572-575
    • /
    • 2008
  • Two-dimensional multiphase flows due to density difference such as the Rayleigh-Taylor instability problem and the droplet splash are simulated by an in-house solution code(PowerCFD). This code employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method in a volume of fluid(VOF) scheme for phase interface capturing. The present results are compared with other numerical solutions found in the literature. It is found that the present code simulates complex free surface flows such as multiphase flows due to density difference efficiently and accurately.

  • PDF

Simulation of viscous and inviscid rayleigh-taylor instability with surface tension by using MPS

  • Kim, Kyung Sung;Kim, Moo Hyun
    • Ocean Systems Engineering
    • /
    • 제8권2호
    • /
    • pp.167-182
    • /
    • 2018
  • RTI (Rayleigh-Taylor instability) is investigated by a multi-liquid MPS (Moving Particle Semi-implicit) method for both viscous and inviscid flows for various density differences, initial-disturbance amplitudes, viscosities, and surface tensions. The MPS simulation can be continued up to the late stage of high nonlinearity with complicated patterns and its initial developments agree well with the linear theoretical results. According to the relevant linear theory, the difference between inviscid and viscous fluids is the rising velocity at which upward-mushroom-like RTI flow with vortex formation is generated. However, with the developed MPS program, significant differences in both growing patters and developing speeds are observed. Also, more dispersion can be observed in the inviscid case. With larger Atwood (AT) number, stronger RTI flows are developed earlier, as expected, with higher potential-energy differences. With larger initial disturbances, quite different patterns of RTI-development are observed compared to the small-initial-disturbance case. If AT number is small, the surface tension tends to delay and suppress the RTI development when it is sufficiently large. Interestingly, at high AT number, the RTI-suppressions by increased surface tension become less effective.

Roe의 Flux-difference Splitting 기법을 이용한 자유표면 유동 모사 (Numerical Simulation of Free Surface Flows Using the Roe's Flux-difference Splitting Scheme)

  • 신상묵;김인철;김용직
    • 대한조선학회논문집
    • /
    • 제47권1호
    • /
    • pp.11-19
    • /
    • 2010
  • A code is developed to simulate incompressible free surface flows using the Roe's flux-difference splitting scheme. An interface of two fluids is considered as a moving contact discontinuity. The continuities of pressure and normal velocity across the interface are enforced by the conservation law in the integral sense. The fluxes are computed using the Roe's flux-difference splitting scheme for two incompressible fluids. The interface can be identified based on the computed density distribution. However, no additional treatment is required along the interface during the whole computations. Complicated time evolution of the interface including topological change can be captured without any difficulties. The developed code is applied to simulate the Rayleigh-Taylor instability of two incompressible fluids in the density ratio of 7.2:1 and the broken dam problem of water-air. The present results are compared with other available results and good agreements are achieved for the both cases.

태양 활동과 대서양 지역에서 발생하는 equatorial plasma bubble 사이의 상호 관계

  • 이재진;민경욱
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2003년도 한국우주과학회보 제12권2호
    • /
    • pp.31-31
    • /
    • 2003
  • Equatorial Plasma Bubble(EPB)은 적도 지역에서 Rayleigh-Taylor Instability에 의해 발생하는 이온층 플라즈마의 불안정성 현상으로, 주변의 플라즈마 밀도에 비해 좁은 영역에서 플라즈마 밀도가 급격하게 떨어지는 현상을 말한다. 지역적으로 보면, 겨울철에는 대서양 지역에서 집중적으로 발생하고 여름철에서는 태평양 지역에서 많이 관측된다. 이러한 불안정 현상은 단파 통신 장애를 유발할 수 있기 때문에 많은 연구 대상이 되어왔지만, 아직까지 태양 활동이나 지자기 변화에 의한 상호 연관성이 규명되지 못 하고 있다. 이것은 Rayleigh-Taylor Instability를 발생시키는 여러 인자들이 매우 복잡하게 관련되어 있기 때문인데, 본 연구에서는 특정 지역에서 발생하는 EPB에 한정하여 태양 활동과의 상호 연관성에 대해 분석하고자 하였다. 또한 단순한 발생 빈도에 대한 통계적인 처리가 아닌, EPB하나 하나에 대한 특성을 분석함으로써 EPB의 발생과 관련한 보다 명확한 분석이 가능하게 되었다. 분석에 필요한 data는 KOMPSAT-1의 Langmuir Probe(LP)에 의해 2000년에서 2001년 사이에 얻은 이온층의 전자 밀도를 사용하였는데, KOMPSAT-1의 LP는 같은 기간 활동한 다른 위성에 비해 좋은 시간 분해능을 가지고 있기 때문에 EPB의 통계 처리에 적당한 것으로 생각되었다.

  • PDF

HIGH-ORDER POTENTIAL FLOW MODELS FOR HYDRODYNAMIC UNSTABLE INTERFACE

  • Sohn, Sung-Ik
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제16권4호
    • /
    • pp.225-234
    • /
    • 2012
  • We present two high-order potential flow models for the evolution of the interface in the Rayleigh-Taylor instability in two dimensions. One is the source-flow model and the other is the Layzer-type model which is based on an analytic potential. The late-time asymptotic solution of the source-flow model for arbitrary density jump is obtained. The asymptotic bubble curvature is found to be independent to the density jump of the fluids. We also give the time-evolution solutions of the two models by integrating equations numerically. We show that the two high-order models give more accurate solutions for the bubble evolution than their low-order models, but the solution of the source-flow model agrees much better with the numerical solution than the Layzer model.

손상된 라이저로부터 유출된 기름 확산에 대한 수치해석 (Numerical Investigation on Oil Spill from Damaged Riser)

  • 김효주;이상철;박선호
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제19권2호
    • /
    • pp.99-110
    • /
    • 2016
  • 해양에서 시추작업 중 라이저가 손상되어 기름유출이 발생하면 경제적인 피해 뿐 아니라 해양환경에 막대한 피해를 가져오게 되므로 사고 발생 시 신속하게 사고에 대처해야 될 뿐만 아니라 초기의 기름 유출량 및 확산 정도를 파악하는 것이 중요하다. 본 연구에서는 소스코드가 공개된 전산유체역학 라이브러리인 OpenFOAM을 이용하여 손상된 라이저로 부터 기름이 유출되는 현상을 해석하였다. 수치방법을 검증하기 위해 제트 유동과 밀도 차에 의한 확산 문제인 Rayleigh-Taylor instability를 해석하였다. 라이저의 손상된 크기, 기름 유출량, 손상된 위치, 해류의 속도를 변화시키며 해석하였다. 해석 결과 기름이 유출 될 경우 수면에 도달 할 때까지 이동한 거리 및 시간을 예측하여 기름 확산에 대비할 수 있는 가이드라인을 제시하였다.

다상유동형 입자법을 이용한 Rayleigh-Taylor 불안정성의 수치해석 (Numerical Study on Rayleigh-Taylor Instability Using a Multiphase Moving Particle Simulation Method)

  • 김경성;구본국;김무현;박종천;최한석;조용진
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제20권1호
    • /
    • pp.37-44
    • /
    • 2017
  • 하나의 시스템 내에 2개 이상의 상이 다른 유체가 존재할 시에는 다상유동에 의한 복장성이 존재하며, 이는 해석의 어려움이 따른다. 두 개 이상의 상이 다른 다상유동은 유동 및 경계면에 영향을 끼치지 때문에, 불안정성과 같은 비선형 유동이 나타나게 된다. 여러 종류의 불안정성 중 레일리히-테일러 불안정성은 대표적인 예로 알려져 있다. 본 연구에서는 밀도차가 레일리히-테일러 불안정성에 미치는 영향을 조사하기 위해 다양한 Atwood 수를 선정하였으며, 초기 경계면 형상 역시 다양한 형태를 설정하고 시뮬레이션 하였다. 본 연구에서 사용된 입자법인 MPS(Moving particle simulation)은 이러한 다상유동에서 널리 쓰이지는 않았으나, 다상유동을 위한 입자간 상호 연성 모델인 자가-부력 항, 표면 장력 항과 경계면 경계 조건 항을 추가로 사용하여 수치해석이 가능하게 하였다. 본 연구에서 새로이 개발된 다상유동형 입자법을 이용하여 고려된 경우들에 대해 수치해석을 수행하였으며, 각각의 결과들을 비교 분석하였다. 또한 레일리히-테일러 불안정성에 기인한 유동의 속도를 측정하여 포텐셜 기반의 이론값과의 비교를 통해 경향성이 일치함을 알 수 있었다. 이론값과의 크기의 차는 포텐셜 기반의 이론값에서는 고려가 힘든 비선형성에 기인한다고 사료된다.