• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.342-350
• /
• 2000

In this paper, the bit error performance for the reverse link of a synchronous direct sequence code division multiple access (DS-CDMA) system employing an imperfect power control scheme over a frequency selective Rayleigh fading channel is analyzed. The system capacity degradation due to power control error (PCE), which is approximated by a log-normally distributed random variable, is estimate as a function of a standard deviation of the PCE. In addition, the impact of the multipath intensity profile (MIP) shape and the number of resolvable paths on the performance of the synchronous transmission is investigated. To estimate the system capacity, the coded bit error performance is evaluated and compared with the conventional CDMA. It is found tat synchronous transmission has less sensitivity to imperfect power control and eases the power control requirements. In particular, as the decay constant $\delta$ of MIP increases, the synchronous transmission in the DS-CDMA reverse link results in a significant BER improvement over the asynchronous transmission even in the presence of imperfect power control. We further conclude that the capacity can be improved by employing the synchronous transmission.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.421-427
• /
• 2009

This paper has proposed 1-2-1 coded cooperative communication that is a combination of STBC and ARQ. Coded cooperative communication is a protocol that integrates channel coding with cooperative communication. In this paper consider convolution encoder. ARQ method can increase the spectral efficiency than conventional cooperative communication because if the received signal from source node is satisfied by the destination preferentially, the destination transmits ACK message to both relay node and source node and then recovers the received signal. Where each relay 1, 2 forwards a punctured portion of receive data. When relay transmit to destination apply STBC the reliability to increase. Moreover this protocol can get better BER performance of receiver using simple comparator. We verified BER performance for the proposed protocol through Monte-Carlo simulation over Rayleigh fading plus AWGN.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.141-149
• /
• 1999

If signal time duration of MC-CDMA method which has studied for next-generation high-speed data transmission is not sufficiently large compared to delay spread of channel, the performance is degraded by generation of intersymbol interference. In this paper, this problem will solve through serial to parallel convertor and make large sufficiently time duration of signal compared to delay spread of channel and rise variable spectral efficiency through the number of serial to parallel convertor subchannel we will add to parallel frequency diversity block for improve the performance in mobile Communication. Spectral efficiency of the proposed system is counted and compared to spectral efficiency of MC-CDMA and investigated through computer simulations by using multipath Rayleigh fading channel.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.574-579
• /
• 1999

A counter-flow type horizontal reactor of metal organic chemical vapor deposition was designed with the Reynolds and the Rayleigh numbers of Re = 4.5 and Ra = 215.8, respectively. The GaN thin films were grown and characterized by Hall measurement, double crystal X-ray diffraction analysis and photoluminescence measurement. The Si and Mg were also used for doping of GaN films. The dislocation density of $2.6{\times}10^8/\textrm {cm}^2$ was included in GaN films representing the geometrical lattice mismatch between sapphire substrates and GaN films. The Si doped n-GaN films provide the electron carrier density and mobility in the regions of $10^{17}~10^{18}/\textrm{cm}^3$ and 200~400 $\textrm{cm}^2$/V .sec, respectively. Mg doped p-GaN films were post-annealed and activated with the hole carrier density of $8{\times}10^{17}/{\textrm}{cm}^3$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.2004-2010
• /
• 1999

This paper presents the blind multiuser detector using the constant modulus algorithm(CMA) to solve the near-far problem in DS-CDMA systems. The convergence property of the detector is compared with the conventional MOE(minimum output energy) detector by means of SIR(signal-to-interference ratio). The MOE detector needs both the spreading code of the users and the timing information, while proposed methods needs only information about the spreading code of users Simulation results show that the CMA-based detector is superior to the conventional blind MOE multiuser detector. For this, the BER performance was tested using different values of SNR and near-far ratio. The SIR is also investigated for different number of users in AWGN and Rayleigh fading channels. We have observed that the proposed blind multiuser detector performs better than conventional MOE multiuser detector.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1013-1020
• /
• 2013

In this paper the super-resolution time delay estimation algorithms based on eigen-analysis are developed for spread spectrum signals along with their comparative performance analysis. First, we shall develop super-resolution time delay estimation algorithms using the representative eigen-analysis based AOA (angle-of-arrival) estimation algorithms such as MUSIC, Minimum-Norm, and ESPRIT, and apply them to the ISO/IEC 24730-2.1 real-time locating system (RTLS) employing a direct sequence spread spectrum (DS-SS) technique to compare their performances in RTLS environments. Simulation results illustrate that all the three algorithms can resolve multipath signals whose delay differences are even smaller than the Rayleigh resolution limit. Simulation results also show that MUSIC and Minimum-Norm provide a similar performance while ESPRIT is inferior to both algorithms in RTLS environments.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.2
• /
• pp.234-242
• /
• 2017

This study investigates vibro-acoustic characteristics of a short, thick cylinder containing a slot given a pined-free boundaries. Using the finite element analysis results, structural modes of the asymmetric cylinder (with a slot) are expressed as the linear combinations of modes of the symmetric cylinder made of same material with identical geometry except the slot. Based on synthesized modal vibrations, acoustic modes of the asymmetric cylinder are obtained with two approaches, i.e., Rayleigh integral calculation and modal expansion of the acoustic modes of the symmetric cylinder. Also, acoustic powers, max. sound pressure and directivity pattern are obtained from acoustic modes and verified with the boundary element analyses. Based on these results, the accuracy of proposed approaches in calculating the vibro-acoustic properties of a short, thick, asymmetric cylinder has been confirmed. The procedure can be applied to the similar cylinders with other boundaries or asymmetric properties. Also, attenuation of vibration and/or sound radiation of the cylinder type practical components can be studied using these approaches.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.77-83
• /
• 2002

The emergence of Bluetooth as a radio interface scheme has allowed electronic devices to be instantly interconnected as ad-hoc networks. These short range ad-hoc wireless networks are called piconets, operated in the unlicensed 2.45 GHz ISM(Industrial, Scientific, Medical) band where up to eight devices may be used to configure single or overlapping piconets. In this paper, we have simulated the PER(Packet Error Rate), the ratio of received packet and payload BER(Bit Error Rate) of piconet with packet types of Bluetooth ACL/SCO(Asynchronous Connection Less/Synchronous Connection Oriented) link over wireless ad-hoc environment. The Rayleigh fading effects are considered as channel model, and the simulation results are based on the baseband model of Bluetooth specification. From the simulation results, the PER and the throughput of Bluetooth piconet are sensibly affected by the packet type of ACL/SCO link.

• Journal of Advanced Navigation Technology
• /
• v.8 no.1
• /
• pp.73-80
• /
• 2004

In the case of Non-Line-of-Sight (NLOS), common telecommunication systems typically have Rayleigh distributed amplitude characteristics. However measurement result of Ultra Wideband (UWB) Multi-Band Orthogonal Frequency Division Multiplexing (MB-OFDM) system which is proposed as one of candidate standard in IEEE 802. 15. 3a for Wireless Personal Area Network (WPAN) shows that it has independent log normal fading in each cluster as well as in each ray within the cluster. Based on this clustering phenomenon observed, MB-OFDM channel model derived from Saleh-Valenzuela model with a couple of slight modifications. In this paper, channel remodeling for RF frequency hopping in MB-OFDM system is achieved, and performances of MB-OFDM system for each channel mode and data rate are verified using modified channel model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.872-877
• /
• 2011

In this paper, the new decoding algorithm of Block Turbo Codes using Channel State Information(CSI), which is estimated to compensate for the distorted signal caused by multi-path fading, is proposed in order to improve error correction capacity during decoding procedure in OFDM system. The performance of the new decoding algorithm is compared to that of the conventional decoding algorithm without using channel state information under the Rayleigh fading channel. Experimental results showed that in case of only one iteration coding gains of up to 5.0dB~9.0dB can be obtained by applying the channel state information to the conventional decoding algorithm according to the modulation methods. In addition to that, the new decoding algorithm using channel state information at only one iteration shows a performance improvement of 3.5dB to 5.0dB when compared to the conventional decoding algorithm after four iterations. This leads to reduce the considerable amount of computation.