• 자연과학논문집
• /
• 제8권2호
• /
• pp.101-109
• /
• 1996

이 논문에서는 기하광학과 회절이론을 통하여 이론적으로 경로손실을 나타내는 식을 유도하였다. 이식을 이용하여 동일 층내에 위치한 안테나간의 전파 특성을 살펴보기 위하여 Bertoni가 사용한 건물과 같은 구조에 대하여 이전의 연구 결과와 비교하였다.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1114-1119
• /
• 2010

This paper is concerned with an numerical analysis of electromagnetic wave propagation from randomly rough surfaces as a desert, sea surface and so on. We propose discrete ray tracing method (DRTM) for analysis of characteristics of wave propagation along one dimensional (1D) and two dimensional (2D) random rough surfaces. The point of the present method is to discretize not only rough surface but also ray tracing. This technique helps saving computer memories and does simplifying ray searching algorithm resulting in saving computation time. Numerical calculations are carried out for 1D and 2D random rough surfaces and electric field distributions are shown to check the effectiveness of the proposed DRTM.

• 한국전자파학회논문지
• /
• 제17권11호
• /
• pp.1058-1064
• /
• 2006

본 논문에서는 3차원 광선 추적법을 이용하여 실내 무선 MIMO 채널에서 공간적 특성들을 해석함으로써 채널 용량을 계산하고, 특정 실내 환경에서 최적화된 다중 안테나의 이격거리를 알아내는 방법을 제안한다. 우선, 가시 영역과 비가시 영역을 갖는 복도 환경에서 3차원 광선 추적법을 이용하여 전파 경로, 전송 손실 및 시간지연 확산 등의 채널 공간적 특성들을 계산하고, 시간 지연 확산 특성을 다이폴 안테나와 네트워크 분석기를 이용하여 측정한 후에 계산 값들과 비교하여 3차원 광선 추적법의 정확성을 검증한다. 그런 다음에 그 실내 환경에 다중 안테나를 갖는 송신기와 수신기를 위치시키고, 수신기 위치별로 송 수신 안테나들의 간격에 따른 전파 경로와 전송 손실을 3차원 광선 추적법을 이용하여 계산하며, 이들 계산 값을 이용하여 채널 용량을 계산한다. 이 계산을 100개의 수신 위치에서 4종류의 안테나 방향 조합을 갖는 조건들에서 안테나 간격에 따른 채널용량을 계산하고, 이들 값들을 평균하여 이 실내 환경에서의 최적의 안테나 이격 거리를 알아내었다.

• 한국전자파학회논문지
• /
• 제15권8호
• /
• pp.759-764
• /
• 2004

본 논문에서는 3D 광선추적법에 기반한 전파 예측 모델을 이용하여 MIMO 채널 특성을 해석적으로 분석하는 방법을 제시한다. 경로들의 위상차를 고려하여 채널간 discrete spatial correlation을 계산하고 이를 이용하여 젠센 부등식을 이용해 평균 MIMO채널 용량의 최대치를 추정한다. 본 해석 모델은 측정을 통한 통계적 접근이나 Monte-Carlo 시뮬레이션을 통한 확률적 접근을 하지 않는 결정적인 모델이므로 시간과 비용측면에서 큰 효율을 가진다. 또한 전파 이론에 기초한 방법이므로 채널 용량에 영향을 미칠 수 있는 안테나 패턴이나 편파, 상호간섭, 안테나 구조 등의 파라미터를 정량적으로 분석 할 수 있는 장점이 있다. 본 모델은 MIMO 시스템에 적합한 안테나 구조 등의 개발에 이용될 수 있을 것이다.

• 한국측량학회지
• /
• 제38권2호
• /
• pp.141-151
• /
• 2020

Since it was first studied in 1980, solar energy analysis model for geographic information systems has been used to determine the approximate spatial distribution of terrain. However, the spatial pattern was not able to be grasped in 3D (three-dimensional) space with low accuracy due to the limitation of input data. Because of computational efficiency, using a constant value for the brightness of the sky caused the simulation results to be less reliable especially when the slope is high or buildings are crowded around. For the above reasons, this study proposed a model that predicts solar energy of vertical surfaces of buildings with four stages below. Firstly, CIE (Commission Internationale de l'Eclairage) luminance distribution model was used to calculate the brightness distribution of the sky using NREL (National Renewable Energy Laboratory) solar tracking algorithm. Secondly, we suggested a method of calculating the shadow effect using ray tracing. Thirdly, LOD (Level of Detail) 3 of 3D spatial data was used as input data for analysis. Lastly, the accuracy was evaluated based on the atmospheric radiation data collected through the ground observation equipment in Daejeon, South Korea. As a result of evaluating the accuracy, NMBE was 5.14%, RMSE 11.12, and CVRMSE 7.09%.

• 한국디지털건축인테리어학회논문집
• /
• 제5권1호
• /
• pp.9-16
• /
• 2005

In Interior design, light is the most important factor in deciding color, texture and illumination level which are the basic factors of spatial design. To apply rendering technologies on prediction of illuminating effect, it is important to understand and analyse the basic properties of the illumination models that are local illumination model and global illumination model. The illumination models in computer graphics express the factors which determine the surface color, texture and light distribution through the reflection. The purpose of this study is to propose the best way of shading algorithm in interior space provided by the computer, based on the experimental analysis that 5 shading methods are applied to the interior space. The results of this study were as followed. 1) Local illumination models that are Lambert shading, Ground shading and Phong shading are not suitable to the prediction of interior illumination effect. 2) Ray tracing that is global illumination model could be adopted to interior illumination effects. Ray tracing is a very versatile algorithm because of the large range of lighting effects it can model. 3) Neither radiality nor ray tracing offers a complete solution for simulating all interior illumination effects. 4) Radiosity excels at rendering diffuse-to-diffuse inter-reflections and ray tracing excels at rendering specular reflections. By merging both shading techniques, that offers the best of both. Using computer technologies to simulate lighting in preliminary design stage which will provide information for designers and occupants to determine the effect of using artificial light sources at each stage of their design process. Further study in illumination analysis, prediction of illumination effect, and lighting calculation is required as computer media expands.

• 한국정보통신학회논문지
• /
• 제7권4호
• /
• pp.736-742
• /
• 2003

지하공간인 터널에 대하여 이론적인 전파 경로손실 예측과 측정을 수행하였다. 터널 내 전파 경로 손실을 보다 정교하게 해석하기 위하여 터널의 단면적이 직사각형이고 직선구조의 터널을 선택하였다. 혼합도파관 모델, ray tracing모델을 이용하여 수신전력을 예측하였고, 측정시스템을 이용하여 송ㆍ수신기 사이의 거리에 따른 수신전력을 측정하였다. 주어진 터널 환경에서 터널 내 수신전력 측정값에 대한 회귀분석 값(0.0238dB/m)은 혼합도파관 EH1,2모드의 감쇄 값(0.0246dB/m)과 가장 근사한 결과를 보였다. 터널내 송ㆍ수신안테나 사이의 거리에 따른 수신 전력에 대한 Ray-tracing모델 시뮬레이션 결과와 측정값은 거의 일치하였다. 터널 내 RMS지연확산을 계산한 결과 송ㆍ수신안테나 사이의 거리가 증가할수록 RMS 지연확산 값은 증가하였고, 코히어런스 대역폭은 감소하였다.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.153-158
• /
• 2007

The present study covers numerical analysis of a thermionic scanning electron microscope(SEM) column. The SEM column contains an electron optical system in which electrons are emitted and moved to form a focused beam, and this generates secondary electrons from the specimen surfaces, eventually making an image. The electron optical system mainly consists of a thermionic electron gun as the beam source, the lens system, the electron control unit, and the vacuum unit. For a systematic design of the electron optical system, the beam trajectories are investigated through numerical analyses by tracing the ray path of the electron beams, and the quality of resulting image is evaluated from the analysis results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.345-349
• /
• 2008

In this paper, environmental noise analysis was performed for large power plant and desalination plant. Ray tracing method was used to predict inside noise of turbine building. It is important to design the plant with the allowable noise level. To improve the accuracy, main noise sources were estimated based on the field data. As the results of analysis, it was concluded that noise levels slightly exceed the specified noise limit in turbine building inside. In order to reduce the noise level, adding sound-absorbing materials to inside wall of turbine building was suggested and verified with the confirmed analysis model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.669-674
• /
• 1997

A sound field in a reverberation room is analyzed by using numerical methods and the SPL distributions are compared to the measurements. In numerical predictions, the BEM is employed in the low frequency range, while sound ray tracing method is used for the high frequency range. In the BEM analysis, the surfaces of the empty reverberation room are assumed as rigid boundaries and the damping coefficients are estimated from the measured absorption coefficient. The comparisons with measurements for 100Hz shows good agreement. In the sound ray tracing analysis, the predicted energy decay are in excellent agreements with theoretical results. It is shown that the energy absorption by air damping plays an important role as frequency becomes higher.