• 대한방사선기술학회지:방사선기술과학
• /
• 제19권2호
• /
• pp.71-77
• /
• 1996

Studies were conducted to determine the clinical application of photodiode. We compared photodiode with ion-chamber as to change of tube potential, tube current, mAs and measured decreasing rate of penetration dose. When tube potential was changed from 60 kVp to 120 kVp, output of photodiode and ion-chamber were changed from 0.4 to 1.625, and 1.018 to 4.268, respectively. This was a good agreement to theory that $I=Kv^2it$(I is intensity, K is constant, v is tube potential, i is tube current, t is time). Characteristics for change of tube current and mAs were also a good agreement to theory. And comparison in decreasing rate of penetration dose was similar except above 6 cm in depth. Our results indicated that photodiode was a good instrument for relative measurement of radiation exposure, but we can not use the photodiode for absolute radiation dose.

• Radiation Oncology Journal
• /
• 제10권1호
• /
• pp.115-120
• /
• 1992

물팬톰내에 조사된 10 MV X-선의 심부율을 입자의 수송이론을 근거로 한 1차원적인 모델을 이용하여 계산하였다. 계산된 이론식의 매개상수는 9개로 줄일 수 있었으며 실측치를 이용하여 비선형 회귀분석 방법으로 얻을 수 있다. 조사면과 선원간의 거리 및 깊이에따른 3차원적인 흡수선량분포의 계산식은 고에너지 광자선이 조사된 물팬톰내에서의 Beam Profile에 대한 시도함수를 이용하여 수송이론에의한 심부율계산을 3차원적으로 확장하였으며 흡수 선량 분포는 3차원적 위치의 함수로 널리 계산할 수 있다. 이 모델을 사용하여 계산된 이론값은 실험값과 $\pm12\%$ 이내의 만족할만큼 잘 일치하였다.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제6권2호
• /
• pp.1-9
• /
• 1968

In mathematics, a definition must have authentic reasons to be defined so. On defining geometric figures, there must be adequencies in sequel and consistency in the concepts of figures, though the dimensions of them are different. So we can avoid complicated thoughts from the study of geometric property. From the texts of SMSG, UICSM and others, we can find easily that the same concepts are not kept up on defining some figures such as ray and segment on a line, angle and polygon on a plane, and polyhedral angle and polyhedron on a 3-dimensionl space. And the measure of angle is not well-defined on basis of measure theory. Moreover, the concepts for interior, exterior, and frontier of each figure used in these texts are different from those of general topology and algebraic topology. To avoid such absurdness, I myself made new terms and their definitions, such as 'gan' instead of angle, 'polygonal region' instead of polygon, and 'polyhedral solid' instead of polyhedron, where each new figure contains its interior. The scope of this work is hmited to the fundamental idea, and it merely has dealt with on the concepts of measure, dimension, and topological property. In this case, the measure of a figure is a set function of it, so the concepts of measure is coincided with that of measure theory, and we can deduce the topological property for it from abstract stage. It also presents appropriate concepts required in much clearer fashion than traditional method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.54-63
• /
• 1994

Mg thin films were prepared on SPCC(cold-rolled steel) substrates by vasuum evapoaration and ion-plating. The influence of argon gas pressure and substrates bias voltage on the crystal orientation and morphology of the film was determined by using X-ray diffraction and scanning electron micrography (SEM), respectively. And the effect of crystal orientation and morphology of the Mg thin films on corrosion behavior was estimated by measuring the anodic polarization curves in deaerated 3% NaCl solution. The crystal orientation of the Mg films deposited at high argon gas pressure exhibited a (002) preferred orientation, regardless of the substrate bias voltage. Film morphology changed from a columnar to a granular structure with the increase of argon gas pressure. The morphology of the films depended not only on argon gas pressure but also bias voltage ; i.e., the effect of increasing bias voltage was similar to that of decreasing argon gas pressure. The influences of argon gas pressure and bias voltage were explained by applying the adsorption inhibitor theory and the sputter theory. And also, this showed that the corrosion resistance of the Mg thin films can be changed by controlling the crystal orientaton and morphology.

• Journal of Astronomy and Space Sciences
• /
• 제19권3호
• /
• pp.181-186
• /
• 2002

We study a role of the proto-accretion disk during the formation of the planetary system, which is motivated with recent X-ray observations. There is an observational correlation of the mass of extrasolar planets with their orbital period, which also shows the minimum orbital period. This is insufficiently accounted for by the selection effect alone. Besides, most of planetary formation theories predict the lower limit of semimajor axes of the planetary orbits around 0.01 AU. While the migration theory involving the accretion disk is the most favorable theory, it causes too fast migration and requires the braking mechanism to halt the planet~0.01 AU. The induced gap in the accretion disk due to the planet and/or the truncated disk are desperately required to stop the planet. We explore the planetary evaporation in the accretion disk as another possible scenario to explain the observational lack of massive close-in planets. We calculate the location where the planet is evaporated when the mass and the radius of the planet are given, and find that the evaporation location is approximately proportional to the mass of the planet as ${m_p}^{-1.3}$ and the radius of the planet as ${r_p}^{1.3}$. Therefore, we conclude that even the standard cool accretion disk becomes marginally hot to make the small planet evaporate at~0.01 AU. We discuss other auxiliary mechanisms which may provide the accretion disk with extra heats other than the viscous friction, which may consequently make a larger planet evaporate.

• 설비공학논문집
• /
• 제20권8호
• /
• pp.563-569
• /
• 2008

Radiative, heating is suitable for outdoor heating system in windy and cold seasons. Optimal design of the reflector is very important to maximize heat transfer to a specific target area in the open space. The geometrical optical theory can be applied to analyze efficiency of the reflector. Commercial ray tracing computer programs are available only for limited geometries of the reflector. Alternatively, it may be designed and analyzed through an approximated simple lens theory. Two types of reflectors are analyzed using either of these methods. The key issue in this paper is to propose a new illumination experimental method for determination of the radiative efficiency. Optical light source and illuminometer are employed. The calculated efficiency of the reflector is compared with experimental one for checking the reliability. The relative errors between the experimental and analytical results are less than 5%, which proves the validity of this method. Based on these methodologies, a practical reflector and heating lamp unit is developed.

• Nuclear Engineering and Technology
• /
• 제7권4호
• /
• pp.285-293
• /
• 1975

30cm 직경 포리에티렌 구체내의 길이에 따른 선량분포중 최대흡수선량인 흡수선량지수를 주어진 감마방사선장내에서 열형광선량계를 이용하여 결정하였다. 열형광선량계내의 흡수선량과 주위 눈질내의 흡수선량간의 환산은 Burlin의 general cavity theory에 의거하였다. $^{60}$Co과 $^{137}$Cs에 의한 방사선장에서 구체내 최대흡수선량은 구체표면으로 부터 각각 0.5cm 및 0.3cm에 나타났으며 이 결과는 이론적으로 예상한 분포특성과 아주 근사하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1061-1066
• /
• 2009

Two fluoro-substituted 2-pyrazoline derivatives, 1-phenyl-3-(4-methoxyphenyl)-5-(4-fluorophenyl)-2-pyrazoline (1) and 1-phenyl-3-(4-methoxyphenyl)-5-(2-fluoro-phenyl)-2-pyrazoline (2) have been synthesized and characterized by elemental analysis, IR, UV-Vis and fluorescence spectra. The crystal structure of 1 has been determined by X-ray single crystal diffraction. For the two compounds, density functional theory (DFT) calculations of the structures and natural population atomic charge analysis (NPA) have been performed at B3LYP/6-311G** level of theory. By using TD-DFT method, electron spectra of 1 and 2 have been predicted, which are very approximate with the experimental ones. Comparative studies on 1 and 2 indicate that the location change of fluorine atom in 5-position phenyl ring of 2-pyrazoline does not make significant change of geometries and electronic transition bands, but it leads to evident change of atomic charge distributions and peak intensities of UV and fluorescence spectra.

• Journal of Magnetics
• /
• 제9권3호
• /
• pp.79-82
• /
• 2004

The structure and magnetic properties of Fe-Ni-N/Cu multilayered films, prepared by the DC magnetron sputter, as a function of different thicknesses of Fe-Ni-N ($t_{FeNiN}$) and Cu ($t_Cu$) layers have been studied by the methods of x-ray diffraction and measurement of magnetic moment. It has been found that the enhancement of (200) orientation in Fe-Ni-N layers is observed at the ratio of layer thickness with about $t_{FeNiN}/t_{Cu}$ $\underline{\simeq}$ 3.75. The reduction of magnetization due to the formation of interdiffusion near the interface is explained by means of the dead layer model. The temperature dependence of magnetization exhibits the feature of Blochs $T^{\frac{2}{3}}$ law. The layer thickness dependence of Curie temperature has been discussed by critical temperature theory of Heisenberg model.

• Restorative Dentistry and Endodontics
• /
• 제36권2호
• /
• pp.98-107
• /
• 2011

치아우식증은 현대 사회에서 여전히 유병률이 높으며, 치과 분야의 주요 상병으로 자리잡고 있다. 치아우식증에 대한 연구에 매우 다양한 방법들이 동원되고 있으나, 최근 미세전산화 단층촬영은 비파괴적인 3차원 분석 기술로서 인기를 얻어 왔으며, 기존의 방법들에 비해 다양한 장점들을 가지고 있다. 미세전산화 단층촬영술은 X선원의 종류에 따라, 모노크로매틱 혹은 폴리크로매틱으로 나뉘어지고, 전자의 경우 몇몇 장점에도 불구하고, 고가의 장비를 요구하므로 후자가 훨씬 널리 사용된다. 투과방사선량의 감소에 따라 결정되는 미네랄 밀도의 차이가 기본 원리이며, 보다 좋은 이미지와 재현 가능한 측정을 위해서는 장비의 교정과 이미지 보정 작업등이 요구된다. 또한, 미세전산화 단층촬영술을 이용하면, 치아우식 병소의 3차원적인 재건이 가능하며, 병소의 내부 구조를 가시화할 수 있다. 최근 컴퓨터 기술의 발전과 더불어 다양한 응용이 시도되고 있는데, 자동화된 충치의 정량적 분석 알고리즘 등이 그 예에 해당된다.