• 한국디지털건축인테리어학회논문집
• /
• 제5권1호
• /
• pp.9-16
• /
• 2005

In Interior design, light is the most important factor in deciding color, texture and illumination level which are the basic factors of spatial design. To apply rendering technologies on prediction of illuminating effect, it is important to understand and analyse the basic properties of the illumination models that are local illumination model and global illumination model. The illumination models in computer graphics express the factors which determine the surface color, texture and light distribution through the reflection. The purpose of this study is to propose the best way of shading algorithm in interior space provided by the computer, based on the experimental analysis that 5 shading methods are applied to the interior space. The results of this study were as followed. 1) Local illumination models that are Lambert shading, Ground shading and Phong shading are not suitable to the prediction of interior illumination effect. 2) Ray tracing that is global illumination model could be adopted to interior illumination effects. Ray tracing is a very versatile algorithm because of the large range of lighting effects it can model. 3) Neither radiality nor ray tracing offers a complete solution for simulating all interior illumination effects. 4) Radiosity excels at rendering diffuse-to-diffuse inter-reflections and ray tracing excels at rendering specular reflections. By merging both shading techniques, that offers the best of both. Using computer technologies to simulate lighting in preliminary design stage which will provide information for designers and occupants to determine the effect of using artificial light sources at each stage of their design process. Further study in illumination analysis, prediction of illumination effect, and lighting calculation is required as computer media expands.

• 대한화학회지
• /
• 제37권10호
• /
• pp.861-866
• /
• 1993

X-선 형광분광 분석에서 매트릭스 효과를 줄이거나 보정을 해야만 보다 정확한 분석원소의 함량을 구할 수 있다. 매트릭스 계수를 구하기 위하여 표준물질을 이용해야 하는데, 괴상시편(ingot)을 임의의 성분함량별로 제작하려면 고온의 열처리로 어려움이 많으므로 금속산화물의 미세한 분말을 각 성분 함량비로 혼합해서 일정 압력을 가해서 시편을 만들었다. 이 시편의 X-선 형광세기와 농도로서 매트릭스 계수를 구해서 미지물질의 성분함량을 구하였다. 그 결과 Ni에 대해서 Fe와 Cr은 흡수 효과가 우세하고 Cr에 대해서 Fe와 Ni는 증강 효과가 우세하였으며 Fe에 대해서 Ni는 증강 효과가 강하고, Cr은 흡수 효과가 강했다. 그리고 또 이 금속산화물과 괴상시편에서 얻은 X-선 형광세기를 비교 검토하였다.

• Tribology and Lubricants
• /
• 제18권4호
• /
• pp.260-266
• /
• 2002

In this study, the effects of oxide layer farmed on the wear tracks of TiN coated silicon wafer on friction and wear characteristics were investigated. Silicon wafer was used for the substrate of coated disk specimens, which were prepared by depositing TiN coating with 1 ${\mu}{\textrm}{m}$ in coating thickness. AISI 52100 steel ball was used fur the counterpart. The tests were performed both in air for forming oxide layer on the wear track and in nitrogen to avoid oxidation. This paper reports characterization of the oxide layer effects on friction and wear characteristics using X-ray diffraction(XRD), Auger electron spectroscopy(AES), scanning electron microscopy (SEM) and multi-mode atomic force microscope(AFM).

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.167-168
• /
• 2002

In this study, the effects of oxide layer formed on the wear tracks of TiN coated silicon wafer on friction characteristics were investigated. Silicon wafer was used for the substrate of coated disk specimens, which were prepared by depositing TiN coating with $1\;{\mu}m$ in coating thickness. AISI 52100 steel balls were used for the counterpart. The tests were performed both in air for forming oxide layer on the wear track and in nitrogen to avoid oxidation. This paper reports characterization of the oxide layer effects on friction characteristics using X-ray diffraction (XRD). scanning electron microscopy (SEM) and friction force microscope (FFM).

• 미생물학회지
• /
• 제5권1호
• /
• pp.1-6
• /
• 1967

The environmental effects on radio-sensitivities of Lactobacillus and Saccharomyces cerevisiae were studied; Liquid suspensions of Lactobacillus and yeast were gamma-irradiated under various conditions; temperatures, hydrogen ion concentrations, amino acids and vitamins were treated seperately with variations of concentrations. (shown in figures) It is found that simultaneous heat treatment is effective to sterilize microorganisms than pre after treatment, and concentration of hydrogen ion does not affect the lethalty of yeast but or Lactobacilli was affect at the range of pH. 5.0 to 7.0. Ascorbic acid, thiamin and pyridoxine were protective dependently against lethal action of gamma-ray and its protective effects increase with the increasings of concentrations. Glutamic acid, aspartic acid, tyrosine and phenylalanine were proved to be protective for both strains at 0.1 between 1.0 percent. It can be suggested that industrial sterilizing doses of irradiation by gamma-ray for food should be applied more than those dose of saline or buffer suspension, because natural food stuffs are rich of vitamins and amino acids.

• Journal of Astronomy and Space Sciences
• /
• 제33권3호
• /
• pp.229-236
• /
• 2016

We present proton-induced single event effects (SEEs) and γ-ray-induced total ionizing dose (TID) data for 1 Gbit lowpower double data rate synchronous dynamic random access memory (LPDDR SDRAM) fabricated on a 5 μm epitaxial layer (54 nm complementary metal-oxide-semiconductor (CMOS) technology). We compare our radiation tolerance data for LPDDR SDRAM with those of general DDR SDRAM. The data confirms that our devices under test (DUTs) are potential candidates for space flight applications.

• 한국세라믹학회지
• /
• 제21권4호
• /
• pp.373-381
• /
• 1984

The coloration of the $Nd_2O_3$ contained $R_2O-BaO-SrO-ZrO_2-SiO_2$ glass added the various amount of $CeO_2$ $MnO_2$, $Fe_2O_3$ and $As_2O_3$ alone or together by the irradiation of X-ray irradiation,. The glasses added $CeO_2$ in proportion to amount were more effective on preventing coloration by X-ray irradiation but the addition of $MnO_2$ produced different color according to the amount of addition. The addition of the $Fe_2O_3$, $TiO_2$ and $As_2O_3$ did not give much effects to the transmission changes of $Nd_2O_3$ contained glass by X-ray irradiation but the glass added $CeO_2$ , $Fe_2O_3$, $TiO_2$ together was most effective to prevent coloration and transmisson changes.

• 한국잠사곤충학회지
• /
• 제7권
• /
• pp.75-79
• /
• 1967

생견 및 건견에 적외선을 조사하여 조사성적과 생사의 품위를 조사하고 아울러 생사에 직접 조사한 때의 실외 물리적 성질을 조사한 결과는 다음과 같다. 1. 생견에 적외선을 조사한 것은 건견 및 무처리구에 비하여 생사량비율이 높았다. 2. 원료견과 생사에 적외선이 조사되면 생사의 강력(4.5g/d)은 향상되나 신도는 저하되었다. 3. 적외선조사에 의하여 생사는 황변화 하였다.

• 소성∙가공
• /
• 제13권3호
• /
• pp.290-295
• /
• 2004

Mircolens and microlens V-groove are realized using a novel fabrication technology based on the exposure of a resist, usually PMMA, to deep X-rays and subsequent thermal treatment and inclined deep X-ray lithography, respectively. The fabrication technology is very simple and produces microlenses and microlens V-groove with good surface roughness of several nm. The molecular weight and glass transition temperature of PMMA is reduced when it is irradiated with deep X-rays. The microlenses were produced through the effects of volume change, surface tension, and reflow during thermal treatment of irradiated PMMA. Microlenses were produced with diameters ranging from 30 to $1500\mu\textrm{m}$. The surface X-ray mask is also fabricated to realize microlens arrays on PMMA sheet with a large area. The size of the micro V-groove is fabricated in the range of 12~$60\mu\textrm{m}$.

• Journal of Pharmaceutical Investigation
• /
• 제21권3호
• /
• pp.125-132
• /
• 1991

Using X-ray crystallography powder diffraction, the quantitative representation method of preferred orientation of particles ill tablets was developed. Selected faces of a tablet. the upper surface and faces cut parallel and normal to the upper surface, were presented to an X-ray beam and X-ray diffraction patterns for these faces were measured. The effects of particle size. tableting pressure, and particle form on the preferred orientation were also investigated. It was also recognized that the degree of anisotropy in terms of capping tendency was influenced by the preferred orientation of particles in tablets.