• 전기화학회지
• /
• 제3권3호
• /
• pp.157-161
• /
• 2000

기판의 변화가 박막전극의 전기화학적 특성에 미치는 영향을 조사하기 위해 박막 $LiCoO_2$ 양극을 alumina, chemically etched-Si그리고 flat-Si기판 위에 증착하였다. Alumina기판의 경우 산소 분위기, $800^{\circ}C$ 30분간 열처리 후 내부에 균열이 존재하는 매우 큰 결정이 형성되었으나 flat-Si 기판의 경우에는 미세하며 균일한 결정이 관찰되었다. Flat-Si 기판 위에 증착된 박막은 alumina또는 식각된 Si 기판의 경우에 비하여 peak potential증감 및 고 전류밀도 방출 능면에서 매우 우수한 특성을 나타내었으며 이는 열처리 후 형성된 결정립의 크기, 표면 형상 및 전류 집전체의 전기저항 차이에 기인한 것으로 생각되었다.

• 한국통신학회논문지
• /
• 제19권4호
• /
• pp.712-720
• /
• 1994

디지털 이동 통신 시스템에서, 길쌈부호는 최적 에러정정기법이라 생각된다. 최근 디지털 이동 통신의 부호정정을 위하여 Viterbi 알고리즘은 길쌈부호의 부호화를 위해 가장 널리 사용된다. Viterbi 디코더의 하드웨어 설계를 위하 많은 방법들이 대부분 부호기의 부호율 R=1/2 또는 2/3인 메모리 소자수가 적고 부호 구속장이 짧은 것으로 제안되었다. 본 논문에서는, 지연 메모리 기억소자인 m=6의 부호율 R=1/2 K=1/2, K=7(171,133) 길쌈부호기를 위한 설계방식을 고려하였다. Viterbi 알고리즘에 상태천이 이중검색 방식을 이용한 새로운 기법을 제안하였다. 그리고 회로설계는 랜덤 2비트 에러 정정 복원할 수 있도록 하였다. 시뮬레이션 결과, 제안된 Viterbi 디코더는 1비트와 2비트 에러신호에 대하여 정확하게 정정하였다.

• Journal of Electrochemical Science and Technology
• /
• 제10권2호
• /
• pp.223-230
• /
• 2019

A facile method for surface coating with $Li_2TiF_6$ which has a high lithium-ion conductivity, on $LiMn_2O_4$ spinel cathode material for high performance lithium ion batteries. The surface coating is performed by using a co-precipitation method with $Li_2CO_3$ powder and $H_2TiF_6$ solution under room temperature and atmospheric pressure without special equipment. Total coating amount of $Li_2TiF_6$ is carefully controlled from 0 to 10 wt.% based on the active material of $LiMn_2O_4$. They are evaluated by a systematic combination of analyses comprising with XRD, SEM, TEM and ICP. It is found that the surface modification of $Li_2TiF_6$ is very beneficial to high cycle life and excellent rate capability by reducing surface failure and supporting lithium ions transportation on the surface. The best coating condition is found to have a high cycle life of $103mAh\;g^{-1}$ at the 100th cycle and a rate capability of $102.9mAh\;g^{-1}$ under 20 C. The detail electrochemical behaviors are investigated by AC impedance and galvanostatic charge and discharge test.

• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.133-141
• /
• 2020

Up to date cosmetic OEM/ODM (original equipment manufacturing/original development manufacturing) industry receives attention as a future growth engine due to steady growth. However, because of limited research and development capability, many companies have employed commercial management platforms specialized for large-sized companies; thus, overall system effectiveness and efficiency is low. Especially, MRP (material requirement planning) system introduced originally in 1970s is employed to calculate the requirement of the parts. However, dynamic nature of production lead time usually results in incorrect requirements. In addition, its algorithm does not consider the capability of the production resources. Also, because the commercial MRP system calculates all subcomponent for fixed period, the more goods have subcomponent, the slower calculation is. Therefore, conventional MRP system cannot respond complicated situation in time. In this study, we will suggest a new method that can respond to complicated situations resulting from short lead time and urgent production order in Korean cosmetic market. In particular, a distributed MRP system is proposed, that consists of multi-functional and operational modules, based on the characteristic of the BOM (bill of material). The distributed MRP system divides components (i.e. products and parts) into several fields and decrease the problem size; thus, we can respond to dynamically changed data any time. Through this solution, we can order components quickly, adjust schedules and planned quantity, and manage stocks reasonably. In addition, a prototype of the distributed MRP system is presented in this paper, in which ERP (enterprise resource planning) sever data is associated with an excel spreadsheet via MSsql. System user interface is implemented by a VBA (visual basic for applications) tool. According to a case study, response rate for delivery and planning achievement rate were enhanced about 20%, and inventory turnover was also decreased. Consequently, the proposed system improves overall profit.

• 한국재료학회지
• /
• 제32권5호
• /
• pp.270-279
• /
• 2022

In this study, N/S co-doped carbon felt (N/S-CF) was prepared and characterized as an electrode material for electric double-layer capacitors (EDLCs). A commercial carbon felt (CF) was immersed in an aqueous solution of thiourea and then thermally treated at 800 ℃ under an inert atmosphere. The prepared N/S-CF showed a large specific surface area with hierarchical pore structures. The electrochemical performance of the N/S-CF-based electrode was evaluated using both 3-electrode and 2-electrode systems. In the 3-electrode system, the N/S-CF-based electrode showed a good specific capacitance of 177 F/g at 1 A/g and a good rate capability of 41% at 20 A/g. In the 2-electrode system (symmetric capacitor), the freestanding N/S-CF-based electrode showed a specific capacitance of 275 mF/cm² at 2 mA/cm², a rate capability of 62.5 % at 100 mA/cm², a specific power density of ~ 25,000 mW/cm² at an energy density of 23.9 mWh/cm², and a cycling stability of ~ 100 % at 100 mA/cm² after 20,000 cycles. These results indicate the N/S co-doped carbon felts can be a promising candidate as a new electrode material in a symmetric capacitor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.696-701
• /
• 2001

The performance and the internal flow of the impeller of the centrifugal chiller compressor with refrigerant R12 as working fluid were studied numerically, using CFD code, CFX-Tascflow, which is commercially available. In this numerical study, the thermodynamic and transport properties of the refrigerant gas were generated by the property program of NIST and linked with main program to extend the capability of the code to refrigerant gases. Numerical study was applied to several mass flow rates near the design mass flow rate at constant rotating speed. Overall performance and flow characteristics of the impeller at impeller exit were investigated. The results were physically reasonable and showed good agreement with experimental measurement at the design flow rate.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.73-76
• /
• 2001

It is well-known that the convergence rate gets worse when an input signal to an adaptive filter is correlated. In this paper we propose a new adaptive filtering algorithm that makes the convergence rate highly improved even for highly correlated input signals. By introducing an orthogonal constraint between successive input signal vectors, we overcome the slow convergence problem caused by the correlated input signal. Simulation results show that the proposed algorithm yields highly improved convergence speed and excellent tracking capability under both time-invariant and time varying environments, while keeping both computation and implementation simple.

• 한국응용과학기술학회지
• /
• 제28권1호
• /
• pp.29-34
• /
• 2011

The sterilization of strain and algae in sea water was studied to see the possibility to apply the redox reaction of metal alloy to meet the international marine organization(IMO) regulation, which was to regulate deballasting concentration of strain and algae above 99% of sterilization. Two different kinds of brass were heat treated at different temperature and cooled rapidly to conserve the specific character of ${\beta}$ brass. Untreated Muntz metal showed the best result of antimicrobial rate in sea water, and 7:3 brass showed similar result to Muntz metal. Heavy metal elution rate was inversely proportional to the sterilization capability.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2001년도 추계학술대회 학술발표 논문집
• /
• pp.69-73
• /
• 2001

The dynamic characteristics of turning processes are complex, non-linear and time-varying. Consequently, the conventional techniques based on crisp mathematical model may not guarantee surface roughness regulation. This paper presents a fuzzy controller which can regulate surface roughness in milling process using end-mill under varying cutting condition. The fuzzy control rules are established from operator experience and expert knowledge about the process dynamics. regulation which increases productivity and tool life is achieved by adjusting feed-rate according to the variation of cutting conditions. The performance of the proposed controller is evaluated by cutting experiments in the converted CNC milling machine. The result of experiments show that the proposed fuzzy controller has a good surface roughness regulation capability in spite of the variation of cutting conditions.

• 에너지공학
• /
• 제7권2호
• /
• pp.172-179
• /
• 1998

본 연구에서는 복합계통의 수송능력을 평가하던 종래의 연구결과를 발견시켜,‘각 지역에 공급되는 전력이 예측된 최대부하에 대해 얼마만큼의 여유가 있는가’를 계산하는 방법을 제안한다. 각 부하모선의 수송여유에 따른 지역간 분할의 내용을 소개하며, 계산과정에서 병목선로도 탐색하도록 하였다. 그 결과 계통에서 취약한 수송여유를 보이는 부하모선의 신뢰도 향상에 관한 자료를 얻을 수 있었다. 제안한 앨고리즘을 IEEE 신뢰도 모델계통에 적용하여 그 유용성을 검증하였다.