• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.4
• /
• pp.156-162
• /
• 1986

The last few years have seen a rapid development of so-called lattice algorithms for the fast solution of finite date algorithms. So far, most of the work on ladder form has been done for the prewindowed case. In this paper, the covariance lattice algorithm for instrumental variable recusions is presented. This algorithm can be used in various areas of adaptive signal processing, spectral estimation and system identification. The behavior of the proposed algorithm is illustrated by some simulation results for spectral estimation.

• International Journal of High-Rise Buildings
• /
• v.12 no.1
• /
• pp.75-82
• /
• 2023

By limiting population and land resources, a high-density urban form has become the inevitable choice for central cities in the rapid growth of many large cities in China. Due to the shift in urban growth and focus, high-density urban areas require restoration and improvement. This study intends to combine ancient and new districts, establish strategies for enhancing urban function, spatial utility, industry, and transportation, and thus enhance regional holistic effectiveness, by performing in-depth research.

• Particle and aerosol research
• /
• v.6 no.2
• /
• pp.61-67
• /
• 2010

In this paper, we describe a new method to form polymer thin films, in which carbon nanotubes (CNTs) are homogeneously distributed so that they can strengthen the mechanical property of resulting polymer film. To do so, we first homogeneously mixed CNTs with polymer in a DMF solvent. With the assistance of ultrasonic nebulizer, the polymer/CNT solution was then aerosolized into micro-sized droplets and finally turned into solidified polymer/CNT composite particles by gas-phase drying process. As the results of SEM and TEM analysis, CNTs were found to be homogeneously immobilized in the polymer matrix particles due to rapid drying process in the gas phase. For comparison purpose, (i) the polymer/CNTs composite particles prepared by aerosol processing method and (ii) polymer/CNTs sheets prepared by simple solution-evaporation method were employed to form polymer/CNTs composite thin films using a hot press. As the result, the aerosol processing of composite particles was found to be a much more effective method to form homogeneously distributed-CNTs in the polymer matrix thin film.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.399-404
• /
• 2008

The objective of this study is to develop the predicting method of concrete strength when remove concrete form-work without making cement test piece at construction site. For this purpose, this study catches the Maturity Method by using RFID, the usability of which is now being emphasized at site, accumulates and record the strength data, which can be gained with the results of existing Maturity Method method that is accompanied with strength estimation study, in database, and finally proposes the system structure which can check the estimated strength by Maturity Method. The merits of this method by using of Maturity Method are as follows; More objective, precise, and rapid decision can be made to the concrete strength and about the maintaining period of concrete form and form support. More efficient control of integrated material management system can be possible. Architectural field example using RFID can be suggested more concretely. RFID applicability can be extended by using DB of material integration management system.

• Journal of Korea Foundry Society
• /
• v.5 no.2
• /
• pp.118-124
• /
• 1985

The thickness ranges and conditions to form the supersaturated solid solution in Al-Cr alloys were investigated with various rapid solidification conditions. Al-Cr alloys, rapidly solidified by using the small droplet chill quenching method, were examined by means of micro-vickers hardness, lattice parameter, thermal analysis and microscopic observation. The results obtained were as follows; 1. With the increase of solidification rate, the solidified structures were changed to intermetallic compound + solid solution, incompletely supersaturated solid solution, completely supersaturated solid solution, in turn. 2. The minimum solidification rate required to form completely supersaturated solid solution was $2.5{\times}10^{-2}cm/sec$, $3.6{\times}10^{-2}cm/sec$ and $6.0{\times}10^{-2}cm/sec$ for Al-1.0wt%Cr, Al-1,2wt%Cr and Al-1.5wt%Cr, respectively. 3. The maximum distance from the chill surface required to form completely supersaturated solid solution was 5mm, 1.3mm and 0.3mm for Al-1.0wt%Cr, Al-1.2wt%Cr and Al-1.5wt% Cr, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.892-898
• /
• 2008

3D rapid prototyping is the manufacturing technology to fabricate a prototype with the data stored in a computer, which differs from conventional casting technology in terms of an additive process. Various 3D rapid prototyping techniques such as stereolithograpy. fused deposition modeling. selective laser sintering, laminated object manufacturing have been developed but among them, 3D inkjet printing has a unique feature that materials could be jetted to directly form the body of a prototype, which could be a finished product functionally and structurally. However, this needs ink with a high solid content, which tends to increase the dynamic viscosity of ink. The increase of ink viscositytends to restrict the jettable range of ink and hence the jetting conditions should be optimized. The intrinsic speed of sound in a hot melt ink with ceramic nanoparticles dispersed is one of key components to determine the jettable range of ink. In this paper, the way to measure the intrinsic speed of sound in a hot melt ceramic ink is proposed and its influence on the jetting condition is discussed.

• Strategy21
• /
• s.42
• /
• pp.83-113
• /
• 2017

After defeat in World War II, Japan's Peace Constitution committed the country to forego the acquisition of offensive military capabilities. However, in the midst of the post-cold war period, Japan began to change its security posture in line with the so-called 'normal state theory', which called for a more robust defense posture and expanded security activities. The second Abe administration promoted these security policies by issuing a National Security Strategy as well as a new National Defense Program Outline(NDPO) in 2013 and by establishing new security institutions such as the National Security Council. The Abe administration also adopted the new concept of a 'Unified Mobile Defense Force' in the 2013 which replaced the 'Dynamic Defense Force' as a new criteria for the Self-Defense Force's acquisition of military capabilities. In this new concept of military capabilities, the Ground Self-Defense Force is planning to replace existing divisions with mobile divisions and to form 'Amphibious Rapid Deployment Bridge' for the first time in 2018, which has long been taboo in Japan. Japan has experience a Marine Corps in the past. Likewise, an offensive changes in the military strategy can change the spectrum of strategy and 'Amphibious Rapid Deployment Bridge' plays a big role in this. Furthermore, Japan is increasing the Coast Guard's budget and capabilities in preparation for contingencies around the Senkaku islands (called the Diaoyu in Chinese). The South Korea navy should utilize Japan's changing security posture to deter immediate threat such as North Korea's military provocations and potential enemy threat such as China, Japan, Russia.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.8
• /
• pp.4191-4211
• /
• 2019

Software product lines (SPLs) are complex software systems by nature due to their common reference architecture and interdependencies. Therefore, any form of evolution can lead to a more complex situation than a single system. On the other hand, software product lines are developed keeping long-term perspectives in mind, which are expected to have a considerable lifespan and a long-term investment. SPL development organizations need to consider software evolution in a systematic way due to their complexity and size. Addressing new user requirements over time is one of the most crucial factors in the successful implementation SPL. Thus, the addition of new requirements or the rapid context change is common in SPL products. To cope with rapid change several researchers have discussed the evolution of software product lines. However, for the evolution of an SPL, the literature did not present a systematic process that would define activities in such a way that would lead to the rapid evolution of software. Our study aims to provide a requirements-driven process that speeds up the requirements engineering process using social network sites in order to achieve rapid software evolution. We used classification, topic modeling, and sentiment extraction to elicit user requirements. Lastly, we conducted a case study on the smartwatch domain to validate our proposed approach. Our results show that users' opinions can contain useful information which can be used by software SPL organizations to evolve their products. Furthermore, our investigation results demonstrate that machine learning algorithms have the capacity to identify relevant information automatically.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.652-660
• /
• 2008

For the recycling of rapid-chilled steel slag, the mechanical strengths and physical properties of EVA-polymer modified mortars with the various replacement ratios of rapid-chilled steel slag were investigated. Twenty five specimens of polymer modified mortars were prepared with the five different amounts of EVA-polymer modifier (0, 5, 10, 15, 20 wt%) and rapid-chilled steel slag (0, 25, 50, 75, 100 wt%). For the investigation of the characteristics of polymer modified mortars, the measurements such as water-cement ratio, unit volume weight, air content for fresh mortar and compressive strength, flexural strength, water absorption, hot water resistance, porosity and SEM investigation for curing specimens were conducted. As a results, with an increase in the replacement ratio of rapid-chilled steel slag, water-cement ratios decreased but unit volume weight increased remarkably. With increasing EVA-polymer modifier and the replacement ratio of rapid-chilled steel slag, percent of water absorption decreased but compressive and flexural strengths increased remarkably. By the hot water resistance test, mechanical strengths decreased but total pore volume and porosity increased remarkably. In the SEM observation, the components of specimen were shown to stick to each other in the form of co-matrix phase before hot water resistance test, but polymer modifier of co-matrix phase was decomposed or deteriorated after hot water resistance test.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.26 no.5
• /
• pp.577-587
• /
• 2012

Warm disease: Any of various heat disease characterizer by rapid onset and shifts, pronounced heat signs, and a tendency to form dryness and damage yin. Exterior heat sign: exterior heat patterns are characterizer by pronounced heat signs, such as a red sore pharynx and a relatively red tongue with dry fur, the pulse is floating and rapid, cough and the production of thick white or yellow phlegm. If wind-heat evil exist in weifen, it becomes exterior syndrome, and a remedy about that is dispelling wind-heat but when wind-heat evil invades in nasal and throat part so the disease occurs, you need to add relieving sore throat worsens invades in lung it makes disharmony of diffuse in lungs. So a remedy about it is diffuse the lung. disharmony of diffuse in lungs makes metabolic disorder of qi and liquid and humor malfunction therefore it occurs cough and heat-phlegm syndrome. heat from weifen invades the whole of lungs and form lung heat. So a remedy about lung heat is clearing away lung heat, this lung heat makes inevitably bleed in lungs, therefore a remedy in this case is clearing the lung to stop bleeding, or moistening the lung. Exterior heat sign means that exterior syndrome coexists with heat syndrome and it means that a remedy of this syndrome need to mix prescriptions for relieving exterior syndrome and heat-clearing prescriptions to treat this syndrome.