Browse > Article

Characteristics of EVA-Polymer Modified Mortars Recycling Rapid-chilled Steel Slag Fine Aggregate  

Hwang, Eui-Hwan (Department of Chemical Engineering, Kongju National University)
Kim, Jin-Man (Department of Architectural Engineering, Kongju National University)
Publication Information
Applied Chemistry for Engineering / v.19, no.6, 2008 , pp. 652-660 More about this Journal
Abstract
For the recycling of rapid-chilled steel slag, the mechanical strengths and physical properties of EVA-polymer modified mortars with the various replacement ratios of rapid-chilled steel slag were investigated. Twenty five specimens of polymer modified mortars were prepared with the five different amounts of EVA-polymer modifier (0, 5, 10, 15, 20 wt%) and rapid-chilled steel slag (0, 25, 50, 75, 100 wt%). For the investigation of the characteristics of polymer modified mortars, the measurements such as water-cement ratio, unit volume weight, air content for fresh mortar and compressive strength, flexural strength, water absorption, hot water resistance, porosity and SEM investigation for curing specimens were conducted. As a results, with an increase in the replacement ratio of rapid-chilled steel slag, water-cement ratios decreased but unit volume weight increased remarkably. With increasing EVA-polymer modifier and the replacement ratio of rapid-chilled steel slag, percent of water absorption decreased but compressive and flexural strengths increased remarkably. By the hot water resistance test, mechanical strengths decreased but total pore volume and porosity increased remarkably. In the SEM observation, the components of specimen were shown to stick to each other in the form of co-matrix phase before hot water resistance test, but polymer modifier of co-matrix phase was decomposed or deteriorated after hot water resistance test.
Keywords
polymer modifier; polymer-modified mortar; rapid-chilled steel slag; replacement ratio;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 E. H. Hwang and T. S. Hwang, J. of Ind. Eng. Chem., 13, 585 (2007).
2 E. H. Hwang, D. S. Kil, and T. S. Hwang, J. Korean Ind. Eng. Chem., 11, 792 (2000).
3 E. H. Hwang, J. J. Choi, and T. S. Hwang, J. Korean Ind. Eng. Chem., 16, 317 (2005).
4 E. H. Hwang, T. S. Hwang, and Eiji Kamada, J. of the Korean Ceramic Society, 31, 949 (1994).
5 J. M. Kim, S. H. Cho, K. J. Kwon, and M. H. Kim, J. of Archi. Institute of Korea, 21, 121 (2005).
6 R. N. Swamy, 8th Int. cong. on. Polymers in Concrete, D. Van Gemert and K. U. Leuven Eds., 8, 21, Oostende, Belgium (1995).
7 Y. Ohama, M. Demura, and M. Komiyama, J. of the Society of Materials Science, 29, 266 (1980).   DOI
8 E. H. Hwang, Y. S. Ko, and J. K. Jeon, J. of Ind. Eng. Chem., 13, 387 (2007).
9 E. H. Hwang, T. S. Hwang, and Y. Ohama, J. Korean Ind. Eng. Chem., 5, 786 (1994).
10 Y. Ohama, 12th Int. Cong. on Polymers in Concrete, Kyu-Seok Yeon Ed., 12, 37, Chuncheon, Korea (2007).
11 D. W. Fowler, 8th Int. cong. on. Polymers in Concrete, D. Van Gemert and K. U. Leuven Eds., 8, 13, Oostende, Belgium (1995).
12 Y. Ohama, 9th Int. cong. on Polymers in Concrete, Franco Sandrolini Ed., 9, 1, Bologna, Italy (1998).
13 Y. Ohama, 5th Asian symp. on Polymers in Concrete, N. Laksmanan, C. V. Vaidyanathan, Y. Ohama, and M. Neelamegam Eds., 3, Chennai, India (2006).
14 E. H. Hwang, D. S. Kil, and I. S. Oh, J. Korean Ind. Eng. Chem., 8, 979 (1997).
15 P. Mani, A. K. Gupta, and S. Krishnamoorthy, Int. J. of Adhesion and Adhesives, 7, 157 (1987).   DOI   ScienceOn
16 V. V. Paturoev and V. P. Trambovetsky, 8th Int., cong. on. Polymers in Concrete, D. Van Gemert and K. U. Leuven Eds., 8, 451, Oostende, Belgium (1995).
17 E. H. Hwang, T. S. Hwang, and D. S. Kil, J. Korean Ind. Eng. Chem., 10, 1066 (1999).
18 D. W. Fowler and G. W. Depuy, 8th Int. cong. on. Polymers in Concrete, D. Van Gemert and K. U. Leuven Eds., 8, 67, Oostende, Belgium (1995).
19 D. W. Fowler and T. U. Taylor, 6th Int. Cong. on Polymers in Concrete, Huang Yiun-Yuan, Wu Keru, and Chen Zhiyuan Eds. 6, 10 Shanghai, China (1990).
20 K. S. Yeon, 5th Asian symp. on Polymers in Concrete, N. Laksmanan, C. V. Vaidyanathan, Y. Ohama, and M. Neelamegam Eds., 13, Chennai, India (2006).
21 Y. Ohama and K. Shiroishida, SP-89, American Concrete Institute, 313 (1985).
22 T. Satoh, Y. Ohama, and K. Demura, Summary of Technical Papers of Architectural Institute of Japan, 137 (1994).