• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.9-15
• /
• 2018

The Ministry of National Defense announced 'Defense Reform 2.0' that aims to strengthen the country's security for decrease of regional uncertainties, growing requirements for advanced technologies, and a need for more efficiency in the Republic of Korea(RoK) Armed Forces this year. It said RoK Armed Forces have to change efficiently in preparation for rapid decline in military service resources as demographic cliff turning into reality, and the rapid evolution of the "battlefield environment" caused by developments in military science and technologies. RoK Navy combat Management System(CMS) made by domestic proprietary technology since 2000s and development centered on Agency for Defense Development require design changes for added requirements. So in this paper, I propose method of design a low cost and high efficiency navy CMS architecture based on high performance server and virtualization technology. And I create a test environment for analysis performance and compare the performance of proposed navy CMS and existing navy CMS.

• 천문학회지
• /
• 제15권1호
• /
• pp.19-36
• /
• 1982

For ${\sim}240$ nearby stars their age and mass were determined and kinematic parameters determined for 362 stars, applying Woolley's three-dimensional potential. Metallicity and kinematic parameters of these stars were correlated with their age, suggesting the slow collapse ($t{\gtrsim}a$ few billion years) of the Galaxy and the initial rapid enrichment in metal abundance (${\Delta}Z{\approx}1/3Z_1$(present) for ${\sim}4{\times}10^8$ yrs). The late slow enrichment rate is given by $d(Z/Z_{\odot})/dt=5.9{\sim}7.0{\pm}3.4$ per Gyr.

• Journal of information and communication convergence engineering
• /
• 제2권3호
• /
• pp.167-171
• /
• 2004

The evolution of modern imaging modalities, followed by the rapid development of computer technology has introduced many new features in the communication networks used in medical facilities. Since it is very important to keep patient's record accurately, the ability to exchange medical data securely over the communication network is essential for any medical information. In this paper, therefore, we introduce some problems which occur from digitizing medical images such as MRI (Magnetic Resonance Imaging), CT (Computed Tomography), CR(Computed Radiography), etc., and then we propose a authentication mechanism for medical image verification using secret watermark images.

• Journal of Genetic Medicine
• /
• 제15권2호
• /
• pp.55-63
• /
• 2018

Clinical and genetic heterogeneity in association with overlapping spectrum is characteristic in pediatric neuromuscular disorders, which makes confirmative diagnosis difficult and time consuming. Considering evolution of molecular genetic diagnosis and resultant upcoming genetically modifiable therapeutic options, rapid and cost-effective genetic testing should be applied in conjunction with existing diagnostic methods of clinical examinations, laboratory tests, electrophysiologic studies and pathologic studies. Earlier correct diagnosis would enable better clinical management for these patients in addition to new genetic drug options and genetic counseling.

• 대한치과의사협회지
• /
• 제57권3호
• /
• pp.169-174
• /
• 2019

The rapid evolution of CAD/CAM (Computer Aided Design / Computer Aided Manufacture) led to a dramatic impact on all disciplines of dentistry especially in the fields of prosthodontics and restorative dentistry. This article is to examine the history, advantages & disadvantages and some clinical considerations of CAD/CAM restoration.

• 한국주조공학회지
• /
• 제21권5호
• /
• pp.290-295
• /
• 2001

We fabricated test samples containing various shape elements and surface roughness checking points for the jewelry cast master patterns by employing the 3D computer aided design (CAD), selective laser sintering (SLS) rapid prototype (RP) with the DuraForm powders. We varied the alignment angle from $0^{\circ}$ to $10^{\circ}$ at a given layer thickness of 0.08 and 0.1mm, respectively, in RP operation. Dimensions of the shape elements as well as values of surface roughness are characterized by an optical microscope and a contact-scanning profilometer. Surface roughness values of the top and vertical face increased as the alignment angle increased, while the other roughness values and shape elements variation were not depending on the alignment angle. The resolution of the shape realization was enhanced as the layer thickness became smaller. The minimum diameter of the hole, common in jewelry design, was 1.2 mm, and the shrinkage became 12% at the 1.6 mm-diameter hole, Our results implied that we face down the proposed design elements with $0^{\circ}$ alignment angle, and consider the shrinkage effect of each shape element in DuraForm RP jewelry modeling.

• Applied Science and Convergence Technology
• /
• 제26권5호
• /
• pp.133-138
• /
• 2017

We investigated the interface defect engineering and reaction mechanism of reduced transition layer and nitride layer in the active plasma process on 4H-SiC by the plasma reaction with the rapid processing time at the room temperature. Through the combination of experiment and theoretical studies, we clearly observed that advanced active plasma process on 4H-SiC of oxidation and nitridation have improved electrical properties by the stable bond structure and decrease of the interfacial defects. In the plasma oxidation system, we showed that plasma oxide on SiC has enhanced electrical characteristics than the thermally oxidation and suppressed generation of the interface trap density. The decrease of the defect states in transition layer and stress induced leakage current (SILC) clearly showed that plasma process enhances quality of $SiO_2$ by the reduction of transition layer due to the controlled interstitial C atoms. And in another processes, the Plasma Nitridation (PN) system, we investigated the modification in bond structure in the nitride SiC surface by the rapid PN process. We observed that converted N reacted through spontaneous incorporation the SiC sub-surface, resulting in N atoms converted to C-site by the low bond energy. In particular, electrical properties exhibited that the generated trap states was suppressed with the nitrided layer. The results of active plasma oxidation and nitridation system suggest plasma processes on SiC of rapid and low temperature process, compare with the traditional gas annealing process with high temperature and long process time.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권8호
• /
• pp.938-945
• /
• 2005

The microstructure evolution in hot forging process is composed of dynamic recrystallization during deformation as well as grain growth during dwell time. Therefore, the control of forging parameters such as strain, strain rate. temperature and holding time is important because the microstructure change in hot working affects the mechanical properties. Modeling equations are developed to represent the flow curve. grain size. recrystallized volume fraction and grain growth phenomena by various tests. The developed modeling equations were combined with thermo-viscoplastic finite element modeling to predict the microstructure change evolution during hot forging process. The large exhaust valve spindle (head diameter of 512mm) was simulated by closed die forging with hydraulic press and cooled in air after forging. The preform was heated to each 1080 and 1150$^{\circ}C$. Numerical calculation was performed by DEFORM-2D. a commercial finite element code. Heat transfer can be coupled with the deformation analysis in a non-isothermal deformation analysis. In order to obtain the fine and homogeneous microstructure and good mechanical properties in forging. the FEM would become a useful tool in the simulation of the microstructure development. In forging, appropriate temperature, strain and strain rate and rapid cooling are required to obtain the fine grain microstructure The optimal forging temperature and effective strain range of Nimonic 80A for large exhaust valve spindle are about 1080$\∼$l120$^{\circ}C$ and 150$\∼$200$\%$.

• 한국작물학회지
• /
• 제33권4호
• /
• pp.375-379
• /
• 1988

Oxyfluorfen에 내성차이가 있는 것으로 기히 선발된 수도 두 품종(내성 : Chokoto, 감수성 : Weld Pally)을 공시하여 약해반응차이의 근거를 찾을 목적으로 ethylene 발생과 엽록소 함량변화 및 전해질 누출에 의한 세포막 삼투성 차이를 조사하였다. 결과를 요약하면 다음과 같다. 1. Oxyfluorfen $10^{-5}$M 처리의 경우, 감수성 품종은 내성보다 신속하고 않은 ethylene 방출현상을 보였구 $10^{-4}$ M 처리에서는 두 품종간의 ethylene 방출량에 차이가 감소하는 경향이었다. 2. Oxyfluorfen $10^{-6}$ M에서는 두 품종 모두 chorophyll함량차이가 없었으나 $10^{-5}$~$10^{-4}$ M에서는 감수성품종이 내성품종에 비하여 반감하였고, $10^{-3}$ M에서는 품종 차이없이 chlorophyll의 완전분해가 일어나는 양상이었다. 3. Oxyfluorfen 처리에 따른 전도도 증가 반응 및 품종간 차이는 $10^{-4}$ ~$10^{-3}$ M에서 일어났으며 , 감수성 품종이 내성품종보다 무처리대비하여 약 10% 정도 전해질 누출이 높은 경향이었다.

• 열처리공학회지
• /
• 제33권3호
• /
• pp.99-106
• /
• 2020

Selective laser melting (SLM) is an additive manufacturing process by melting metallic powders and stacking into layers, and can product complex shapes or near-net-shape (NNS) that are difficult to product by conventional processes. Also, SLM process is able to raise the efficiency of production by creating a streamlined manufacturing process. For manufacturing in SLM process using Ti-6Al-4V powder, analysis of microstructural evolution and evaluation of mechanical properties are essential because of rapid melting and solidification process of powders according to high laser power and rapid scan speed. In addition, it requires a post-processing because the soundness and mechanical properties are degraded by defects such as pore, un-melted powder, lack-of-fusion, etc. In this study, hot isostatic press (HIP) was conducted as a post-processing on SLM-printed Ti-6Al-4V alloy. Microstructure of post-processed Ti-6Al-4V alloy was compared to as-built Ti-6Al-4V, and the evolution of quasi-static (Vickers hardness, room temperature tensile characteristic) and dynamic (high-cycle fatigue characteristic) mechanical properties were analyzed.