• Journal of Korea Multimedia Society
• /
• v.7 no.1
• /
• pp.91-97
• /
• 2004

As the electronic commercial transaction is being transacted by contents which can get an illegal intrusion from the outside, we sincerely require security for them. We must consider a protection countermeasure about intrusion from protection of the passive form to protection intrusion of the active one. So the security is required against hackers illegality intrusion into the contents. As soon as the intrusion happens about the contents, the tools providing the monitor of contents are required to minimize the damage to the systems. Modified web contents detection system in this paper prevents the loss of resources and manpower required through individually monitoring on the web. Also, this paper offers rapid support of security that it analyzes the weakness of contents security of the web environment and the cause of the problem with the leakage of information. So this system has the pur pose of protecting the weakness of contents security and the leakage of information.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.1
• /
• pp.68-79
• /
• 2009

It is inevitable to have cutting line to get the 2D pattern from 3D body surface. In this paper the efficiency of curvature plot as a cutting line in the process of flattening 3D surface was investigated. As reference, basic clothing construction line was adopted to divide the 3D surface into small blocks to make the flattening process easy. Female dummy as well as human body were scanned and surface of the upper body was segmented using curvature plot and basic constructing line. 2D tight-fit pattern was developed using three software, the RapidForm 2004, 2C-AN and Yuka CAD. Gap between clothes and body, and the clothing pressure on the body was observed to determine the fit of the clothes. As results, clothes constructed with blocks divided by curvature plot displayed a similar level of tight fit as compared with those by basic construction line. It was found that curvature plot is effective method as a segmentation of the 3D surface even for the actual body which does not have any previous reference line. It is expected that application of curvature plot will be expanded in 3D apparel technology.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.217-224
• /
• 2016

Purpose: This study aimed to generate 3-D occlusal curvatures and evaluate the relationship between the occlusal curvatures and mandibular occlusal morphology factors. Methods: Mandibular dental casts from 25 young adult Korean were scanned as a virtual dental models with a 3-D scanner(Scanner S600, Zirkonzahn, Italy). The curve of Spee, curve of Wilson, and Monson's sphere were generated by fitting a circle/sphere to the cusp tips using a least-squares method. The mandibular mesiodistal cusp inclination, buccolingual cusp inclination, and tooth wear parameters were measured on the prepared virtual models using RapidForm2004(INUS technology INC, Seoul, Korea). Wilcoxon signed-rank test was performed to test side difference, and Spearman's rank correlation coefficients were investigated to verify the correlation between occlusal curvatures and correlated factors (a=0.05). Results: The mean radii of curve of Spee were $83.09{\pm}33.94$ in the left side and $79.00{\pm}28.12mm$ in the right side. The mean radii of curve of Wilson were $66.82{\pm}15.87mm$ in the mesial side and $47.87{\pm}9.40mm$ in the distal side with significantly difference between mesiodistal sides(p<0.001). The mean radius of Monson's sphere was $121.85{\pm}47.11mm$. Most of the cusp inclination parameters showed negative correlation for the radius of Monson' sphere(p<0.05). Especially, the buccolingual cusp inclinations in mesial side of molar showed high correlation coefficients among the factors(p<0.05). Conclusion: The radius of Monson's sphere was greater than the classical 4-inch values, and the buccolingual cusp inclinations in mesial side of molar can be considered as one of the main factors correlating with the radius of Monson's sphere.

• YAKHAK HOEJI
• /
• v.49 no.6
• /
• pp.449-458
• /
• 2005

There have been rapid changes in the pharmaceutical environment after the separation of Dispensing and Prescribing practice. In the early stage of this system, outpatients had few options to choose their pharmacies due to various obstacles. Under these circumstances, this study on the defection tendency of long-term care patients was performed through the analysis of outpatients who quit visiting a pharmacy nearby general hospital. PowerBuilder ver 9.0 program was used to extract significant data, and SPSS package was employed for statistic analysis. 3,308 outpatients who visited a pharmacy nearby hospital for a month (in January, 2004) were studied. Patients' sex, age and location of residence, the class of medical insurance, the characteristic type of medication (powder, split form, medication for external use/injection), waiting time, disease (department) were considered as variable factors. It turned out that the patient revisit ratio was 80.8$\%$ and the patient defection ratio was 32.4$\%$. As was expected, those factors mentioned above influenced on the revisit and defection ratio considerably. In terms of patient factors, it proved that there was no relationship among sex, location of residence, the class of medical insurance and revisit (defection) ratio. Only age factor influenced the ratio; the older, the higher revisit ratio and the less defection ratio. In respect of dispensing factors, there were obvious relationships among the factors and the ratio: bill (money they had to pay individually), waiting time, number of medications, splitting of tablets, unit price of drug and revisit (defection) ratio showed significant relationship. The result of this study revealed an aspect of outpatients' behavior and it could be used as a reference for better patient service and customer relationship management.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.220-227
• /
• 2020

Purpose: This study aims to investigate the cusp variation pattern of the Korean mandibular second premolar and to determine the difference in tooth diameter and surface area using a virtual three-dimensional model. Methods: Dental casts from 69 students were scanned as a virtual dental models with a three-dimensional dental model scanner. Tooth diameter, absolute and relative individual areas, total crown area, the number of lingual cusps and central groove pattern were analyzed using RapidForm 2004. The Mann-Whitney U-test and the Kruskal-Wallis test were performed to verify sexual dimorphism, the difference in tooth diameter and surface according to the cusp variation pattern (α=0.05). Results: There was no significant difference except in buccolingual diameter (p<0.05) and buccolingual diameter at the cervix (p<0.05). The relative surface area of the total clinical crown was 65.76% for the buccal half and 34.24% for the lingual half, with a ratio of 2:1. In the case of the presence of two lingual cusps, the ratio was 21.47% for the mesiolingual half and 14.12% for the distaolingual half, with a ratio of 3:2. The dominant central groove patterns of the second premolar were the H-pattern (42.0%), followed by the Y-pattern (37.7%), then the U-pattern (20.3%). The relative buccal half was largest in the U-pattern central groove and the relative lingual half was largest in the Y-pattern central groove (p<0.05). Conclusion: This study is significant in that it measured quantitative surface areas and the findings could be a meaningful reference to comprehend dental anatomy in Koreans.

• The korean journal of orthodontics
• /
• v.45 no.3
• /
• pp.113-120
• /
• 2015

Objective: This study compared occlusal contact areas of ideally planned set-up and accomplished final models against the initial in class I and II molar relationships at finishing. Methods: Evaluations were performed for 41 post-orthodontic treatment cases, of which 22 were clinically diagnosed as class I and the remainder were diagnosed as full cusp class II. Class I cases had four first premolars extracted, while class II cases had maxillary first premolars extracted. Occlusal contact areas were measured using a three-dimensional scanner and RapidForm 2004. Independent t-tests were used to validate comparison values between class I and II finishings. Repeated measures analysis of variance was used to compare initial, set up, and final models. Results: Molars from cases in the class I finishing for the set-up model showed significantly greater contact areas than those from class II finishing (p < 0.05). The final model class I finishing showed significantly larger contact areas for the second molars (p < 0.05). The first molars of the class I finishing for the final model showed a tendency to have larger contact areas than those of class II finishing, although the difference was not statistically significant (p = 0.078). Conclusions: In set-up models, posterior occlusal contact was better in class I than in class II finishing. In final models, class I finishing tended to have larger occlusal contact areas than class II finishing.

• Archives of Pharmacal Research
• /
• v.27 no.2
• /
• pp.265-272
• /
• 2004

The pharmacokinetics of CKD-732 (6-0-4-[dimethyl-aminoethoxy)cinnamoyl]-fumagillolㆍhemioxalate) was investigated in male SD rats and beagle dogs after bolus intravenous administration. The parent compound and metabolites obtained from in vitro and in vivo samples were determined by LC/MS. The main metabolite was isolated and identified as an N-oxide form of CKD-732 by NMR and LC/MS/MS. CKD-732 was metabolized into either M11 or others by rapid hydroxylation, demethylation, and hydrolysis. The blood level following the intravenous route declined in first-order kinetics with $T_{1}$2/$\beta$ values of 0.72-0.78 h for CKD-732 and 0.92-1.09 h for M11 in rats at a dose of 7.5-30 mg/kg. In dogs, $T_{1}$2/$\beta$ values of CKD-732 and M11 were 1.54 and 1.79 h, respectively. Moreover, AUC values increased dose dependently for CKD-732 and M11 in rats and dogs. The CLtot and Vdss did not change significantly with increasing dose, indicating linear pharmacokinetic patterns. The excretion patterns through the urine, bile, and feces were also examined in the animals. The total amount excreted in urine, bile, and feces was 2.13% for CKD-732 and 1.29% for M11 in rats, and 1.58% for CKD-732 and 2.28% for M11 in dogs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1399-1409
• /
• 2005

The purpose of this study was to analyze the shape of gathered skirts using a three-dimensional measurement system. And in this experiment, I try to accumulate three-dimensional data of wearing model and to figure out analyzing method made by shape of clothes. The experimental design consists of two factorial designs. I set up three different kinds of fabrics, ratio of gathers. Therefore nine samples were made. The instrument and tools for three-dimensional measurement was whole body 3D scanner. Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. T-test to effect an inspection of evidence, there was difference about measurement times. One-way ANOVA to analysis effect of gather made by gathering conditions. The following results were obtained; 1. As a result of inspecting an error several times using a three-dimension measurement system, convinced data was obtained. 2. At front, distribution of gap amount was larger than back. And as ratio of gathers increased, distribution of gap amount showed regularly. 3. After analyzing horizontal sectional figure of skirts, as a height of skirt changed from waist to the bottom of skirts, the results showed as follows. While section width, section thickness, node width, node depth increased, node count decreased. 4. With the horizontal section levels of gather skirt, the silhouette on middle hip section was similar with the silhouette of body line. And as ratio of gathers around hip section increased, nodes showed regularly. At the bottom of skirts showed different nodes by different gathering condition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.340-347
• /
• 2008

A prototype of 3D clothing design system with a direct pattern development function was suggested, reflecting intuitive design functions and design modifications while considering the fit of clothing patterns with the 3D human body in the virtual 3D space. The research method was as follows. Clothing models were created using a 3D design tool, 3ds max on the surface of 3D human body model made by scanning an actual human body. 3D illustrations were completed by revising the fit and sizing of the human body and clothing models. 2D T-shirt pattern was produced 3D illustrations using from a 3D scanning data modeling solution RapidForm 2004, a 2D conversion program for 3D data called 2C-AN, and Yuka CAD. As a result, the following conclusions were made. The fit of the clothing and human body can be adjusted by reflecting individual body figure characteristics and 3D illustrations over the actual 3D body model. Furthermore, intuitive design support functions were intensified overcoming the weak point of existing 3D clothing design system by developing the direct clothing design in the virtual 3D space. 3D illustration design modifications can be directly reflected on clothing patterns from 3D illustrations by 3D clothing design system developed in this study.

• Journal of the Korean Geographical Society
• /
• v.39 no.2
• /
• pp.195-211
• /
• 2004

The innovation of information and communication technology has brought the emergence of the digital economy in which the growing importance of the Internet for the production and consumption of information has caused a rapid increase of commercial domains. Domains are basic form of Internet address for the delivery of information, but the location of registered commercial domains is not free from a spatial context. Utilizing a database of commercial domain registrations, spatial statistical methods and GIS, the spatial dimensions of the commercial domains are explored for the city of Seoul. Through this research, it was found that the commercial domains were unevenly distributed, namely 44% of commercial domains are located at 3 Gus in Seoul. The locations of commercial domains by themselves represented a strong spatial autocorrelation among adjacent places. In order to identify factors affecting spatial variation in the development of the commercial domains among Dongs, a conditional spatial autoregressive model which effectively eliminates a spatial autocorrelation was used. As a result of this research, it is clearly shown that the selective location of firms having commercial domains and their role in economic activities are influencing the spatial structure of urban with dynamic mix of spatial characteristic.