• Ocean and Polar Research
• /
• v.32 no.4
• /
• pp.449-462
• /
• 2010

Ongoing port baseline surveys are essential for developing ballast water management procedures in order to control unwanted or potentially risky species. Seasonal distributional patterns of marine dinoflagellate Noctiluca scintillans internationally recognized as harmful species and the related environmental factors were surveyed at Incheon, Gwangyang and Ulsan seaports in Korea from 2007 to 2009. The above three seaports were chosen because of their status as the busiest in Korea and characterized by their different bioregions. Average temperature ranged from $2.08^{\circ}C$ in winter to $26.39^{\circ}C$ in summer at Incheon, $7.22^{\circ}C$ in winter to $25.77^{\circ}C$ in summer at Gwangyang, and $11.59^{\circ}C$ in winter to $21.67^{\circ}C$ in summer at Ulsan during the study period. Average salinity varied from 26.88 in winter to 31.25 in summer at Incheon, 22.83 in winter to 33.41 in summer at Gwangyang, and 30.04 in winter to 33.90 in summer at Ulsan. Noctiluca scintillans appeared consistently at all ports during the study period, indicating its eurythermal and euryhaline nature. The highest abundances (21,813 to 41,753 $inds{\cdot}m^{-3}$) of N. scintillans were observed in May 2008 and 2009 at the outer stations of Incheon port. Abundances of between 10,000 and 30,000 $inds{\cdot}m^{-3}$ were only observed at the innermost station of Ulsan in May, while abundances of between 10,000 and 40,000 $inds{\cdot}m^{-3}$ were frequently observed throughout all stations at Gwangyang during the study period, coinciding with consistently high concentration of chlorophyll-a (hereafter chl-a) ($4.32-8.24\;{\mu}g\;l^{-1}$) compared to other ports. Spatio-temporal variation of chl-a concentration was not significantly correlated with abundances of N. scintillans (p>0.01). However, relatively high chl-a concentrations were consistently recorded along with high abundances of N. scintillans throughout all stations at Gwangyang compared to other ports. Abundances of N. scintillans observed at the three surveyed ports did not significantly (p>0.01) affect the concentration of dissolved oxygen in the surface mixed layer, indicating that the species abundances were not enough to cause reduction of dissolved oxygen during the study period. Presented results indicated that the Gwangyang seaport may provide the most suitable environment for a wide range of N. scintillans blooming compared to other ports.

• Journal of Fashion Business
• /
• v.12 no.2
• /
• pp.87-99
• /
• 2008

This study aims to classify lower trunk body types of Chinese men in their middle age (30s and 40s) and suggest the standard for them to design slacks pattern. Mollison's relation deviations were used to analyze the direct measurement items in this research compared to those of Size Korea 2004. Though Korean middle-aged men were higher in most items than Chinese counterparts, all items except mid-thigh circumference and side hip length were merely within the range of ${\pm}1\sigma$. According to the results of size classification by absolute values, factor analysis extracted to 2 factors(horizontal size of lower body and vertical size of lower body), and cluster analysis brought about 3 types(type1: tall and thin trunk (36.9%), type 2 : normal height and thick trunk(45.5%), and type 3 : short and normal trunk(17.6%) with some significant differences among them. Also, the results of shape classification by index values, they were extracted 4 factors (waist-hip flatness, waist-hip cross section, vertical waist-groin and hip-surface length) by factor analysis and revealed 3 types(type 1: different waist-hip width, thick, long waist, long upper hip, and short hip-surface length(27.8%), type 2 : different waist-hip width, flat, short upper hip, high hip and groin, and average hip-surface length(29.4%), and type 3: small waist-hip width, thick, average upper hip, and short hip-surface length (42.8%)) with significant differences among them by cluster analysis. The results of standard body types by shape-size combination, 19subjects(10.16%) under these values are regarded as standard body types. Significance was not seen in all items in the t-test results between the total group and the standard group. The latter had lower variation coefficients and smaller individual differences than the former. However, in-depth research is required for generalization since this research is limited to a small number of subjects in Ningbo of Zhejiang.

• Progress in Medical Physics
• /
• v.13 no.4
• /
• pp.224-228
• /
• 2002

Myocardial tagging technique such as spatial modulation of magnetization (SPAMM) allows the study of myocardial motion with high accuracy. However, the accuracy of the estimation of tag intersection can be affected by tagline spacing. The aim of this study was to investigate the relationship between tagline spacing of SPAMM image and tagging contrast-to-noise ratio (CNR) in in-vivo study. Two healthy volunteers were undergone electrocardiographically triggered MR imaging with SPAMM-based tagging pulse sequence at a 1.5T MR scanner. Horizontally modulated stripe patterns were imposed with a range from 3.6 to 9.6 mm of tagline spacing. Images of the left ventricle(LV) wall were acquired at the mid-ventricle level during cardiac cycle with FE-EPI (TR/TE = 5.8/2.2 msec, FA= 10$^{\circ}$. Tagging CNR for each image was calculated with a software which developed in our group. During contraction, tagging CNR was more rapidly decreased in case of narrow tagline spacing than in case of wide tagline spacing. In the same heart phase, CNR was increased corresponding with tagline spacing. Especially, at the fully contracted heart phase, CNR was more rapidly increased than the other heart phases as a function of tagline spacing. The results indicated that the optimization of tagline spacing provides better tagging CNR in order to analyze the myocardial motion more accurately.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.4
• /
• pp.313-325
• /
• 2011

Finite element grid system using h-refinement on the Yellow Sea was constructed based on previous study (Suh, 1999b) from 14 K to 210 K and special attention was concentrated on refining the coastal zone. In grid generation, depth change between adjacent points and non-dimensional tidal wave length ratio were considered. As a result approximately a quarter of the total nodes are located nearby 5 m of shallow area. Accurate bathymetry data using 30's and ETOPO1 with open boundary conditions of 8 major tidal constituents extracted automatically from FES2004 have been applied. In tidal simulation a 3-dimensional nonlinear harmonic model was setup and tidal amplification due to changes in vertical turbulent and bottom friction were simulated. In this study not only 8 major tidal constituents but also nonlinear shallow tides $M_4,$, $MS_4$ and long period $M_f,$, $M_{sf}$ were reproduced. It is found that implication of spatial variation of friction coefficient plays a very important role in reproduction of astronomical and shallow tides which are computed by iterative computation of nonlinear terms. Also it should be considered differently with respect to tidal periods. To understand the distribution of tidal asymmetry, amplitude ratio of $M_4/M_2$ and phase differences $2g(M_2)-g(M_4)$ were calculated. Tidal distortion ratio marks up to 0.2 on the west coast showing shallow coastal characteristics and somewhat wide range of ebb-dominances in front of Mokpo area are reproduced.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.4
• /
• pp.407-412
• /
• 2008

Anthocyanin pigments in soybean seed coat were D3G (Delphinidin-3-glucoside), C3G (Cyanidin-3- glucoside) and Pt3G (Petunidin-3-glucoside), which have been known potential roles in the prevention and treatment of chronic diseases. Anthocyanin contents in seed coat of blck soybean were significantly different according to soybean variety, C3G content showed the highest value in all materials and its variation was also wide. Antioxidant activity of each pigment was analyzed by DPPH and TEAC methods in which D3G and C3G showed high activity. And this study was carried out to investigate the effects of anthocyanin to human cancer cells. Cytotoxity were analyzed by MTT assay after anthocyanin pigments treated on leukemia (Jurkat T) and adenocarsinoma (MCF-7) cells. It showed decrement of cell numbers as anthocyanin concentration is increasing. ${EC}_50$ range of anthocyanin concentrations were $100{\sim}250\;ug/mL$ and $100{\sim}250\;ug/mL$ in Jurkat T and MCF-7 cell, respectively. D3G showed higher cytotoxicity than other pigments in Jurkat T cell whereas activity of C3G was high in MCF-7 cell. It is believed that supplementation of human diets with soybean anthocyanin markedly reduces human cancer mortality rates.

• Analytical Science and Technology
• /
• v.24 no.1
• /
• pp.24-37
• /
• 2011

The ionic compositions of atmospheric aerosols were investigated and characterized in coastal and mountainous sites of Jeju Island, which were Gosan and Mt. Halla-1100 sites respectively. It was found that the concentrations of nss-$SO_4^{2-}$ (non-sea salt sulfate) and $NH_4^+$ at two measurement sites were almost similar and they showed high concentrations in June at the same time. The concentration of soil-originated nss-$Ca^{2+}$ (non-sea salt calcium) was generally associated with that of anthropogenic $NO_3^-$ and its concentration was increased during spring season. From the comparison of time-series variation and regression analysis of ionic species between two measurement sites, TSP (total suspended particulate) in Gosan site was directly influenced by sea salt particles and the concentration levels of nss-$SO_4^{2-}$, $NH_4^+$, nss-$Ca^{2+}$, $K^+$, and $NO_3^-$ were mainly related with long-range transported air pollutants rather than local pollution sources.

• Resources Recycling
• /
• v.13 no.4
• /
• pp.23-31
• /
• 2004

Basic studies have been conducted regarding the attempt of the utilization of waste Undaria pinnatifida as an adsorbent for the adsorption treatment of lead-containing wastewater. Undaria pinnatifida was found to be chiefly composed of hyo-carbonaceous compounds and have a fairly high specific surface area, which suggesting the possibility of its application as a Potential adsorbent. The electrokinetic Potential of Undaria pinnatifida particles was observed to be negatively highest at around pH 8 and the fact that its electrokinetic potentials are negative at the whole pH range supported it might be an efficient adsorbent especially for cationic adsorbates. Under the experimental conditions, $Pb^{2+}$ was found to mostly adsorb onto Undaria pinnatifida within a few minutes and reach the equilibrium in adsorption within ca. 30 minutes. The adsorption of $Pb^{2+}$ was exothermic and explained well by e Freundlich model. Acidic pretreatment of Undaria pinnatifida enhanced its adsorption capacity for $Pb^{2+}$ , however, the reverse was observed for alkaline pretreatment. The formation of organometallic complex between $Pb^{2+}$ and some functional groups on the surface of Undaria pinnatifida was considered to be one of the main drives for adsorption. Finally the adsorbability of$ Pb^{2+}$ was examined to be rather affected by several solution features such as the coexistence of other adsorbate, the variation of ionic strength, and the concentration of complexing agent.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.2
• /
• pp.134-141
• /
• 2021

BACKGROUND: The analytical method was established for determination of fungicide chinomethionat in several animal commodities using gas chromatography (GC) coupled with electron capture detector (ECD). METHODS AND RESULTS: In order to verify the applicability, the method was optimized for determining chinomethonat in various livestock products including beef, pork, chicken, milk and egg. Chinomethionat residual was extracted using acetone/dichloromethane(9/1, v/v) with magnesium sulfate and sodium chloride (salting outassociated liquid-liquid extraction). The extract was diluted by direct partitioning into dichloromethane to remove polar co-extractives in the aqueous phase. The extract was finally purified with optimized silica gel 10 g. CONCLUSION: The method limit of quantitation (MLOQ) was 0.02 mg/kg, which was in accordance with the maximum residue level (MRL) of chinomathionate as 0.05 mg/kg in livestock product. Recovery tests were carried out at two levels of concentration (MLOQ, 10 MLOQ) and resulted in good recoveries (84.8~103.0%). Reproducibilities were obtained (Coefficient of variation <5.2%), and the linearity of calibration curves were reasonable (r²>0.995) in the range of 0.01-0.2 ㎍/mL. This established analytical method was fully validated and could be useful for quantification of chinomathionat in animal commodities as official analytical method.

• Korean Journal of Environmental Biology
• /
• v.41 no.1
• /
• pp.1-13
• /
• 2023

Broad bean wilt virus 2 (BBWV2) is a species in the genus Fabavirus and family Secoviridae, which is transmitted by aphids and has a wide host range. The BBWV2 genome is composed of two single-stranded, positive-sense RNAs, RNA-1 and RNA-2. The representative symptoms of BBWV2 are mosaic, mottle, vein clearing, wilt, and stunting on leaves, and these symptoms cause economic damage to various crops. In 2019, Perilla fructescens leaves with mosaic and yellowing symptoms were found in Geumsan, South Korea. Reverse-transcription polymerase chain reaction (RT-PCR) was performed with specific primers for 10 reported viruses, including BBWV2, to identify the causal virus, and the results were positive for BBWV2. To characterize a BBWV2 isolate (BBWV2-GS-PF) from symptomatic P. fructescens, genetic analysis and pathogenicity tests were performed. The complete genomic sequences of RNA-1 and RNA-2 of BBWV2-GS-PF were phylogenetically distant to the previously reported BBWV2 isolates, with relatively low nucleotide sequence similarities of 76-80%. In the pathogenicity test, unlike most BBWV2 isolates with mild mosaic or mosaic symptoms in peppers, the BBWV2-GS-PF isolate showed typical ring spot symptoms. Considering these results, the BBWV2-GS-PF isolate from P. fructescens could be classified as a new strain of BBWV2.

• Journal of Forest and Environmental Science
• /
• v.40 no.2
• /
• pp.90-98
• /
• 2024

This study analyzes the characteristics of sound-absorbing materials made from forest by-products of the deciduous tree species Zelkova serrata (Z. serrata) by evaluating their sound absorption performance. Accordingly, sound-absorbing materials with varying sample thicknesses, leaf sizes, and drying conditions were fabricated. The sound absorption properties were measured using the impedance tube method via middle-type measurement tube (100 Hz-3,200 Hz). The sound absorption properties were evaluated using the average sound absorption coefficient (ASAC), which was calculated from the measured sound absorption coefficients at 250 Hz, 500 Hz, 1,000 Hz, and 2,000 Hz. The ASAC value significantly improved as the leaf size increased to 0.5×0.5 cm², 1.0×1.0 cm², and 2.0×2.0 cm². The ASAC values under the two drying conditions were similar. There was no significant difference in ASAC according to the leaf size under the air-dried leaf condition, with a thickness of 2.50 cm. The highest ASAC value according to the sound-absorbing material thickness was 0.47 at a thickness of 2.50 cm and leaf size of 2.0×2.0 cm² under the air-dried leaf condition. In addition, the variation in ASAC was 0.23, indicating that the sound absorption performance according to leaf thickness was more significant than the difference in absorption properties according to leaf size. A sound absorption coefficient (SAC) of 0.4 or higher was observed across the measurable frequency band (100 Hz-3,200 Hz). Furthermore, the SAC values with respect to leaf size and thickness were close to 1 in the high-frequency range above 2,000 Hz. Therefore, it is considered that sound-absorbing materials using Z. serrata leaves are advantageous in the field of absorbing noise in a high-frequency band of 2,000 Hz or more, and it is better to manufacture a thickness of 2.50 and 2.0×2.0 cm².