• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2216-2219
• /
• 2003

Accurate speech region detection and automatic syllable segmentation is important part of speech recognition system. In automatic speech recognition system, they are needed for the purpose of accurate recognition and less computational complexity, In this paper, we Propose improved syllable segmentation method using ramp edge detection method and residual signal Peak energy. These methods were used to ensure accuracy and robustness for endpoint detection and syllable segmentation system. They have almost invariant response to various background noise levels. As experimental results, we obtained the rate of 90.7％ accuracy in syllable segmentation in a condition of accurate endpoint detection environments.

• 대한교통학회지
• /
• 제24권7호
• /
• pp.41-51
• /
• 2006

본 논문에서는 고속도로 트럼펫 IC형식의 연결로 선형조건 및 교통조건에 따른 교통사고특성에 관한 기초연구를 수행하였다. 교통사고 특성분석은 트럼펫 IC형식의 유입 및 유출 연결로 형태의 도로선형조건 및 교통조건에 따른 다양한 거시적 미시적 교통사고분석을 수행함으로써 연결로의 형태(직결, 준직결, 루프 연결로) 별로 도로선형조건(곡선반경, 곡률차, 본선 구배)과 교통조건(교통량)이 교통사고에 미치는 영향을 규명하였다. 거시적으로 사고율은 트럼펫 IC A형과 B형이 거의 유사하게 나타났으나, 사고건수는 B형이 A형보다 약 1.5배 높게 나타났다. 그리고 유출연결로의 사고율은 유입연결로보다 약3배 이상 높게 나타났다. 거시적으로 유출연결로의 사고율은 교통량, 곡률차, 첫 번째 곡선반경의 증가에 따라 지수형으로 감소하였다. 그러나 사고율과 두 번째 곡선반경의 관계는 ${\cap}$형의 관계를 보였으며, 본선구배에 따른 사고율은 본선구내 $-0.15{\sim}-0.5%$에서 높게 나타났다. 고속도로 트럼펫 IC형식 연결로의 교통사고 특성분석 결과는 비용-효율적인 트럼펫 IC 연결로의 설계를 위한 평가의 수단으로 이용될 수 있을 뿐만 아니라, 사고취약 고속도로 연결로에 대한 개선 대안의 수립에도 기여할 것으로 기대된다.

• 대한인간공학회지
• /
• 제29권4호
• /
• pp.681-686
• /
• 2010

Although the height of a ramp is an important design element, it has not been considered in prior studies. Therefore, in this study, the ramp slope and height are considered as independent variables. To analyze the effects of the slope and height, five levels of slope (1:6, 1:8, 1:10, 1:12 and 1:14) and three levels of height (15cm, 30cm and 45cm) are considered. For the dependent variables, the total time, velocity and perceived discomfort were considered as usability measures, pulse rate changes and EMG signals of four related muscles (extensor carpi radialis, triceps brachii, anterior deltoid and posterior deltoid) were considered as physiology measures. As a result, differences among usability and physiological characteristic for the five slopes increased as the height increased. Additionally, slope effects were minor when the height was low (15cm). Almost domestic/international regulations and guidelines related to ramp recommended 1:12 slope for the ramp design, however, there was no significant difference between 1:10 and 1:12 according to result of this study. In addition, slope effects were minor at a low height; thus, a slope of 1:8 can be recommended if the installation space for a gentler ramp is not sufficient.

• International Journal of Reliability and Applications
• /
• 제15권2호
• /
• pp.125-150
• /
• 2014

Accelerated life tests (ALTs) are extensively used to determine the reliability of a product in a short period of time. Test units are subject to elevated stresses which yield quick failures. ALT can be carried out using constant-stress, step-stress, progressive-stress, cyclic-stress or random-stress loading and their various combinations. An ALT with linearly increasing stress is ramp-stress test. Much of the previous work on planning ALTs has focused on constant-stress, step-stress, ramp-stress schemes and their various combinations where the stress is generally increased. This paper presents an optimal design of ramp soak-stress ALT model which is based on the principle of Thermal cycling. Thermal cycling involves applying high and low temperatures repeatedly over time. The optimal plan consists in finding out relevant experimental variables, namely, stress rates and stress rate change points, by minimizing variance of reliability function with pre-specified mission time under normal operating conditions. The Burr type XII life distribution and time-censored data have been used for the purpose. Burr type XII life distribution has been found appropriate for accelerated life testing experiments. The method developed has been explained using a numerical example and sensitivity analysis carried out.

• 한국유체기계학회 논문집
• /
• 제18권5호
• /
• pp.49-53
• /
• 2015

Thrust vector control is the method which generates the side force and roll moment by controlling exhausted gas directly in a rocket nozzle. TVC is classified by mechanical and fluid dynamic methods. Mechanical methods can change the flow direction by several objects installed in a rocket nozzle exhaust such as tapered ramp tabs and jet vane. Fluid dynamic methods control the flight direction with the injection of secondary gaseous flows into the rocket nozzle. The tapered ramp tabs of mechanical methods are used in this paper. They installed at the rear in the rocket nozzle could be freely moved along axial and radial direction on the mounting ring to provide the mass flow rate which is injected from the rocket nozzle. TVC of the tapered ramp tabs has the potential to produce both large axial thrust and high lateral force. We have conducted the experimental research and flow analysis of ramp tabs to show the performance and the structural integrity of the TVC. The experiments are carried out with the supersonic cold flow system and the schlieren graph. This paper provides to analyze the location of normal shock wave and distribution of surface pressure on the region enclosed by the tapered ramp tabs.

• 대한교통학회지
• /
• 제14권4호
• /
• pp.7-29
• /
• 1996

The optimal solution obtained by a linear programming model is to maximize the ramp inflow rate. It is argued in this paper that the maximization of inflow rate is different from the maximization of outflow rate under congested conditions. Therefore, this paper proposes a systematic searching procedure from a linear programing formulation to a integer programming : first obtain the optimal solution by a linear programming and then adding weight to linear programming then. solve the optimal solution again by integer programming i.e. The proposed method is an interactive approach. Measure of effectiveness by simulation models regards the real time data(O/D, queue, delay, etc), can be utilized in the proposed interactive process.

• Environmental Engineering Research
• /
• 제14권1호
• /
• pp.48-52
• /
• 2009

Solubilization of sewage sludge creates favorable conditions for anaerobic microorganisms to produce biogas. In this paper, we quantify the effect of heating pretreatment on the degree of solubilization of sewage sludge. The pretreatment process was carried out using a lab-scale industrial microwave unit (2450 MHz frequency). Response surface analysis was applied to determine the combination of temperature-increase rate (ramp rate) (2.9 to 17.1 ${^{\circ}C}$/min) and terminal temperature (52 to 108${^{\circ}C}$). Both ramp rate and temperature significantly affected the solubilization degree of sludge. Within the design boundaries, the conditions predicted to maximize the solubilization degree of 15.8% were determined to be 2.9 ${^{\circ}C}$/min and 104${^{\circ}C}$.

• 대한교통학회지
• /
• 제28권3호
• /
• pp.29-37
• /
• 2010

도시고속도로 연결로 접속부 교통혼잡을 해결하기 위한 가장 대표적인 전략은 램프미터링 전략이다. 램프미터링 이란 고속도로의 유입램프에서 램프유입량을 조절하는 것을 말하며, 램프교통량을 제한함으로써 고속도로의 흐름을 정상 교통류로 유지시키는 것을 목적으로 한다. 본 연구에서는 램프미터링 기법중에서 고정식 미터링 방식을 기초로 하여, 동일한 미터링율이 본선에 진입할 때 차량진입방식(단일차량, 차량군)에 따라 본선 교통류에 미치는 영향을 비교분석하고 평가하고자 한다. 연결로 차량의 진입방식별 본선 교통류의 효과를 살펴본 결과, 동일한 미터링율에서 한 주기에 많은 연결로 차량들이 진입하는 다중차량진입방식이 본선교통류의 속도, 밀도, 지체 측면에서 불리한 것으로 분석되었고, 또한 교통와해가 조기에 발생하여 합류용량도 감소시키고 정체로 전이되어 낮은 속도를 갖는 것으로 나타났다. 이러한 결과들은 본선 교통량수준이 높을수록 연결로 진입방식에 따른 미터링 전략이 매우 중요하다는 것을 의미한다.

• 대한교통학회지
• /
• 제26권5호
• /
• pp.73-80
• /
• 2008

ALINEA는 램프의 하류부에 설치된 검지기를 이용하여 최적의 차량점유율 상태를 유지하도록 유입램프의 교통량을 조절하는 방안으로 검지기를 이용한 차량의 점유율을 제어 변수로 이용하고 있다. 하지만, 현재 가장 널리 사용되고 있는 루프제어기 점유율의 정확도가 비교적 낮다는 점과 점유율은 검지기 길이의 함수로서 ALINEA의 적용 시 설치 지점마다, 그리고 검지기 길이마다 최적 점유율 보정과정이 필요한 점을 감안할 때 현재 사용 중인 ALINEA를 보완할 필요가 있다. 관리자와 이용자 측면에서 점유율이 사실상 인지하기 어려운 변수임을 감안할 때 쉽고 간편한 변수의 사용을 통한 모형개발이 의미를 가질 수 있을 것이다. 본 연구에서는 ALINEA 알고리즘의 기본 개념을 이용하되 제어변수인 점유율을 이용할 때의 불편한 점 및 단점을 일부 개선시킬 수 있는 속도 변수를 이용하여 ALINEA 모델을 보완하고자 한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3068-3073
• /
• 2007

Aerodynamic forces and moments have been used to control rocket propelled vehicles. If control is required at very low speed, Those systems only provide a limited capability because aerodynamic control force is proportional to the air density and low dynamic pressure. But thrust vector control(TVC) can overcome the disadvantages. TVC is the method which generates the side force and roll moment by controlling exhausted gas directly in a rocket nozzle. TVC is classified by mechanical and fluid dynamic methods. Mechanical methods can change the flow direction by several objects installed in a rocket nozzle exhaust such as tapered ramp tabs and jet vane. Fluid dynamic methods control the flight direction with the injection of secondary gaseous flows into the rocket nozzle. The tapered ramp tabs of mechanical methods are used in this paper. They installed at the rear in the rocket nozzle could be freely moved along axial and radial direction on the mounting ring to provide the mass flow rate which is injected from the rocket nozzle. In this paper, the conceptual design and the performance study on the tapered ramp tabs of the thurst vector control has been carried out using the supersonic cold flow system and shadow graph. Numerical simulation was also performed to study flow characteristics and interactions between ramp tabs. This paper provides to analyze the location of normal shock wave and distribution of surface pressure on the region enclosed by the tapered ramp tabs.