• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.3
• /
• pp.109-115
• /
• 2003

Diamond-like carbon (DLC) films are deposited at room temperature using a filtered cathodic vacuum arc (FCVA) technique. The influence of negative bias voltage (applied to the substrate from 0 to -250V) on the $sp^3$ hybridized carbon fraction is examined by Raman spectroscopy and x-ray photoelectron spectroscopy (XPS) for C 1s core peak. For the first time, depth profile of C 1s, Si 2p, and O 1s XPS peaks for the deposited DLC film are obtained. DLC film is modeled as a multilayered structure. composing of surface, bulk, and interface. In addition, the x-ray reflectivity (XRR) is proposed as a method for estimating the density, surface roughness, and thickness of each layer constituting the DLC film. The estimated thickness of DLC film is in good agreement with the result obtained from the transmission electron microscope (TEM) measurement.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.617-617
• /
• 2013

최근 그래핀 연구와 더불어 2차원 구조의 나노소재에 대한 관심이 급증하면서 육각형의 질화붕소(hexagonal boron nitride; h-BN) 박막(nanosheet) [1]이나 붕소 탄화질화물(boron caronitride; BCN) 박막 [2,3]과 같은 2차원 구조체에 대한 연구가 활발히 진행되고 있다. 그 중 BCN은 반금속(semimetal)인 흑연(graphite)과 절연체인 h-BN이 결합된 박막으로 원소의 구성 비율에 따라 전기적 특성을 제어할 수 있다는 장점이 있다. 따라서 다양한 나노소자로의 응용을 위한 연구가 활발히 진행되고 있다. 본 연구에서는 폴리스틸렌(polystyrene, PS)과 보레인 암모니아(borane ammonia)를 고체 소스로 이용하여 열화학기상증착법으로 BCN 박막을 SiO2 기판 위에 직접 합성하였다. SEM과 AFM 관측을 통해 합성된 BCN 박막의 두께가 약 10 nm이며, RMS roughness가 0.5~2.6 nm로 매우 낮은 것을 확인하였다. 합성과정에서 PS의 양을 조절하여 BCN 박막의 탄소의 밀도를 성공적으로 제어하였으며, 이에 따라 전기적인 특성이 제어되는 양상을 확인하였다. 또한 합성온도 변화에 따른 BCN 박막의 전기적인 특성이 제어되는 양상을 확인하였다. 추가적으로 같은 방법을 이용하여 BCN 박막을 Cu 위에서 합성하여 SiO2 기판위에 전사하였다. 합성된 BCN 박막의 구조적 특징과 화학적 조성 및 결합 상태를 투과전자현미경(transmission electron microscopy), X-선 광전자 분광법(X-ray photoelectron spectroscopy), 라만 분광법(Raman spectroscopy)을 통해 조사하였고, 이온성 용액법(ionic liquid) [4]을 이용하여 전계효과 특성을 측정하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.52-57
• /
• 2008

In this study, the effects of carbonization temperature on the physico-chemical properties of porous wood charcoal are studied by FT-IR and Raman spectroscopies. IR studies showed that cellulose and hemicellulose are mostly decomposed in the precarbonization stage at $500^{\circ}C$, while the decomposition reaction of relatively more stable lignin lasts up to $700^{\circ}C$. Above $900^{\circ}C$, the peak at $1575cm^{-1}$ disappears and a new peak at $1630cm^{-1}$, which seems to be related to the new carbon deposit phase, is evolved. The results of Raman studies, which show the red-shift of D-band and the increase in the relative intensity of D- to G-band, indicate that the size of the crystalline becomes smaller with increasing the carbonization temperature.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.51-57
• /
• 2008

we have demonstrated structural evolution and optical properties of Si-nanowires (NWs) synthesized on Si (111) substrates with nanoscale Au-Si islands by rapid thermal chemical vapor deposition (RTCVD). The Au-Si nano-islands (10-50nm in diameter) were employed as a liquid-droplet catalysis to grow Si-NWs via vapor-liquid-solid mechanism. The Si-NWs were grown by a mixture gas of SiH4 and H2 at a pressure of 1.0 Torr and temperatures of $500{\sim}600^{\circ}C$. Scanning electron microscopy measurements showed that the Si-NWs are uniformly sized and vertically well-aligned along <111> direction on Si (111) surfaces. The resulting NWs are ${\sim}60nm$ in average diameter and ${\sim}5um$ in average length. High resolution transmission microscopy measurements indicated that the NWs are single crystals covered with amorphous SiOx layers of ${\sim}3nm$ thickness. In addition, the optical properties of the NWs were investigated by micro-Raman spectroscopy. The downshift and asymmetric broadening of the Si main optical phonon peak were observed in Raman spectra of Si-NWs, which indicates a minute stress effects on Raman spectra due to a slight lattice distortion led by lattice expansion of Si-NW structures.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.379-382
• /
• 2019

Synthesis of gold nanoparticles (NPs) made an aqueous environment via the reduction of HAuCl₄ by ascorbic acid (AC) with the surfactant of polyvinylpyrrolidone (PVP). Highly monodisperse gold particles with size ranges from 4 to 20 nm were prepared in high-yield by pH control. The synthesized gold nanoparticles were analyzed for structural and optical properties using transmission electron microscopy (TEM) and UV-vis spectroscopy. In this study, we could reveal that the prepared nanoparticles exhibited efficient surface-enhanced Raman scattering (SERS) properties, and their SERS activities depends on size.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.287-291
• /
• 2009

The heterogeneous decomposition of ammonia on a quartz surface in an inverted, stagnation-point flow reactor was investigated using a measurement reactor and a numerical model of the reactor. In the experiments, 8 mole% of ammonia in nitrogen was used and the temperature of an electric heater was set in the range $300{\sim}900^{\circ}C$ to heat the quartz surface where the decomposition took place. Gas temperatures and ammonia concentrations in the reactor obtained using in situ Raman spectroscopy were analyzed with the numerical model and it was revealed that, depending on the heater temperature, the temperature of the quartz surface was estimated to be in the range $235{\sim}619^{\circ}C$ and the activation energy of the decomposition on the surface was in the range 10.9~15.8 kcal/mol.

• Journal of the Korean Ceramic Society
• /
• v.31 no.11
• /
• pp.1369-1377
• /
• 1994

• Journal of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.34-40
• /
• 1984

The reorientational motion of $C_6F_6$ in neat liquid is investigated in the temperature range 293∼333K by analyzing ${\nu}_2$ and ${\nu}_16$ bands of its Raman spectrum. Diffusion constants for the tumbling ($D_{\bo}$) and spinning ($D_{\parallel}$) motions are determined. The reorientation of the molecule seems to be distinctly anisotropic. Based on the hydrodynamic model, the tumbling motion of the figure axis of $C_6F_6$ is largely diffusional. On the other hand, the spinning motion of the same axis looks mostly inertial.

• Journal of the Korean Chemical Society
• /
• v.47 no.5
• /
• pp.439-446
• /
• 2003

Surface-enhanced Raman(SER) spectroscopy was utilized to investigate the adorption orientation of the 4-biphenylcarboxylic acid(BPCA) derivatives, such as 4'-cyano-BPCA(c-BPCA), 4'-mercapto-BPCA(m-BPCA), and 4'-amino-BPCA(a-BPCA), which were adsorbed on Au and Ag colloid monolayers. For the systematic approach, information regarding the adsorption behavior of benzoic acid, biphenyl, and BPCA was applied to the target molecules. From the spectral behaviors of benzene ring, C-H stretching, carboxylate anion, and the other finger printing vibrational modes, it was concluded that only the m-BPCA was adsorbed tilt with thiol group being adsorbed on Au surface, whereas the other molecules were adsorbed flat on both Au and Ag surfaces.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.610-610
• /
• 2013

그래핀을 구성하는 탄소 원자는 모두 표면에 존재하기 때문에, 맞닿아 있는 물질에 따라 그래핀의 물리적 특성에 민감한 영향을 미치기도 한다. 본 연구에서는 라만분광법과 원자 힘 현미경(atomic force microscopy, AFM)을 이용하여 통상적인 열처리 조건에서 그래핀에 탄화수소가 흡착될 수 있는 가능성을 탐구하였다. 산소가 없는 조건에서 열처리된 그래핀으로부터 D, G, 2D 봉우리와 겹쳐지는 폭이 넓은 새로운 라만 봉우리들이 관찰되었다. 열처리 시간, 온도 및 진공도에 따른 라만 스펙트럼의 변화와AFM에 의해 확인된 표면의 구조 변화로부터 새로이 관찰된 라만 봉우리는 탄화수소의 탄화에 의해 그래핀의 표면에 형성된 비결정성 탄소물질(amorphous carbon)임을 확인하였다. 기계적 박리법과 화학기상증착법으로 시료를 준비할 때 사용된 폴리머 잔유물이 열처리 과정에서 탄화수소를 배출하는 것으로 판단된다. 이 연구는 그래핀 소자의 작동에 있어서 환경적인 효과를 이해하고 탄화에 의해 그래핀 표면에 만들어진 비결정질 탄소를 정량화하는데 도움을 줄 것이다.