• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.438-440
• /
• 2003

It is very important to ensure system safety during the process of developing a system. Railway system is also devoting a great portion for the safety. Nowadays many countries leading railway industry have their own system assessment process according to the situation of their train control system. In this Paper, several methods to derive Tolerable Hazard Rate are represented in the railway signalling system the characteristics of those methods are also considered respectively.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1205-1207
• /
• 2002

As going through technical transition of signal control logic to mechanic, electric, electronic etc., railway signalling system utilizing computer control technology has recently been developed and used since railroad service had been firstly started in 1825 by beginning that horseman kept red color sign and notified something wrong existence and nonexistence of front route to train driver in the Britain. In this paper, the domestic technical change process of signalling technology to be a basic of train control technology is discussed and then reviewed about technical trend of advanced nation's development.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1999-2004
• /
• 2009

Since 2003, the domestic ground signalling system of the Kyeongbu and Honam lines has been steadily improving with the introduction of the ATP system and application of the system to the train is actively being pursued for 2009 target. Therefore, new ground signalling systems are being installed to the trains and track conditions to control the train speed to a maximum of either 80km/h, 120km/h, 150km/h, or 160km/h. As well, considering safe breaking distance, block signalling has been installed and also the change over times of the track switching device has been adjusted according to the train speed. Since the new Tilting trains will be running faster than present trains, at speeds over 180 km/h, we anticipate that there will be problems with present signalling facilities. Therefore this paper attempts to examine the various problems with the interface between the ATP signalling system and the new Tilting trains and also it will propose the most effective operating plan based upon case studies of successful foreign operations.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.671-675
• /
• 2008

Railway signal system is responsible for the safety operation of railway and performs vital functions as safe space control, route control and etc. These functions prevent collision accidents between trains and derailment accidents of trains. However, these accidents are occurred by some causes. It is necessary to analysis hazards, hazard frequency and risk contribution. And railway signal system must make practical application of the analysis results. This paper includes analysis results of railway accident data by FTA(Fault Tree Analysis) and hazards. Railway signal system must consider these hazards. This paper used the railway accident data of RSSB(Railway Safety & Standard Board) of UK. We will use the FTA result to set up a draft of safety criteria of railway signal system.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.189-191
• /
• 2009

Compatibility concerns between train signalling systems and rolling stock are a significant problems to cross-acceptance of rolling stock in urban railway system. In this paper, we measured the conducted emission flowing current through rails and analyzed results for DC rolling Stock.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.304-313
• /
• 2016

It is necessary to receive telegrams transmitted by transponder tags installed along the track in order to detect the exact position of a high-speed train. In a high-speed railway environment, telegrams can be corrupted by the electromagnetic interference that comes from onboard electric train power equipment or wayside devices. In this study, we verified the railway environment compatibility of a high-speed transponder system developed as a train position detection system. We installed transponder tags on the Honam high-speed line and measured the number of error-free telegrams received from the transponder tag while the HEMU-430X was running at 268km/h~334km/h. Based on the measurement, we estimated the length of the contact zone formed between the transponder reader and tag. Field test results allow us to estimate how many error-free telegrams can be received when HEMU-430X is at speeds up to 400km/h.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.211-225
• /
• 2011

Railroad signalling systems are to control intervals and routes of trains. There are ATS(Automatic Train Stop), ATP(Automatic Train Protection), ATO(Automatic Train Operation) and ATC(Automatic Train Control) system. Trains are operated in the section which is met on the signalling system because various signalling systems are used in Korea. On the other words, trains are not operated in the section which is used in the other signalling system. To solve this problem, recently combined on-board system has been developed. The combined on-board system is designed by doubling the ATS, ATP and ATC system. Information signal is received by magnetic sensors in the ATC system and is received by antennas in the ATS and ATP system. Therefore, it is possible to arise transmission problems by magnetic coupling. In this paper, electric model of the ATS and ATP antenna is suggested and interference frequency by the magnetic coupling between the ATS and ATP antenna is estimated numerically. As a results of the magnetic coupling, the value of the magnetic coupling is presented without magnetic induction.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1152-1158
• /
• 2014

In Modern society, various important systems is operated such as nuclear plant, chemistry industry, railway system and so on. But these systems can cause high risky accidents. Hence, these systems are required to ensure the individual and societal risk criteria. In this paper, we reviewed EU risk criteria which is already operated in UK and Netherlands, then we proposed acceptable risk criteria and estimated risk of oil immersed transformer for subway with FN curve.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1324-1328
• /
• 2013

The reason of train location detection is generally the train interval control between the railway stations and the train path control in the railway station yard in order to avoid train collision. It is very important to know the train location for shortening the train headway, and improving the efficiency of railway maintenance as well as the safe operation of trains. Therefore, the accurate detection of train location is the prerequisite technology in railway signalling system. The track circuit and the wheel sensor of rolling stock have been used to detect the train location widely in urban railway as well as high speed train. The track circuit is continuously monitored by electrical equipment to detect the absence of the train and the tachometer and encoder is used for the wheel sensor to measure the train speed. But speed sensor failures are frequent due to the extremely harsh operating conditions encountered in rail vehicle. The CBTC(Communication based Train Control) system has been used in urban railway system recently. But the installation of CBTC system is very high and the modification of design is difficult. This paper deals with the feasibility of new train location detection method using magnetic sensors.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.863-869
• /
• 2006

The existing Europe Standard, EN 50159 with respect of safety of railway signalling communication protocol has been changed into International Standard, IEC 62280. This Standard presents the requirement for safe communication between safety-related devices which connects with transmission system, there are both closed and open transmission system. Regardless of this international Standards, the communication protocol for interface between CTC communication server and external facilities has been standardized several years ago in our country, so this is applied to integrated CTC system in KORAIL. Two Standards are currently standardized as a protocol between CTC and external facilities, these standard protocols are also required high level safety as a communication link which is transmitted vital control information in common with the train control system. For that reason, we have made analysis of requirement for the safe transmission required by international standard. Under this analysis, we have studied safety features of communication protocol applying to our standard. In other words, we have researched that how many the requirement from international standard for safe transmission is reflected in domestic standard protocol, and also whether our standard makes sure of safety enough or not.