• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1343-1349
• /
• 2010

This paper presents the behavior of the soil based on the Gap Parameter during the Shield TBM tunnel excavation in sandy soil. This study reproduced the tunnel before and after the excavation according to the diameter of the tunnel, water ratio and depth to execute a Scaled Model Test and analyzed the behavior change of the upper soil. As a result, tunneling after for soil stress decreased was similar in all the Case. In addition, the soil stress decreased was in water ratio increases.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.579-584
• /
• 2003

In this study, anisotopic yield function is proposed for the numerical analysis of reinforced tunnel ground with grouting. For this, material properties of the reinforced ground both by equilibrium as well as kinematic condition along the interface and by the mean field theory of Eshelby (1957) and Zhao (1990) are compared with each other and, as a result, the advantage/disadvantage of the proposed models are summarized. Finally, reinforced ground around tunnel with grouting is analyzed numerically. A new anisotropic yield function model is shown to be more reliable than the previous one and the predicted result is agreeable with the experimental data available.

• International Journal of Railway
• /
• 제1권3호
• /
• pp.99-105
• /
• 2008

Flow around an ICE2 high-speed train exiting a tunnel under the influence of a wind gust has been studied using numerical technique called detached eddy simulation. A wind gust boundary condition was derived to approximate previous experimental observations. The body of the train includes most important details including bogies, plugs, inter-car gaps and rotating wheels on the rail. The maximal yawing and rolling moments which possibly can cause a derailment or overturning were found to occur when approximately one third and one half of the train, respectively, has left the tunnel. These are explained by development of a strong vortex trailing along the upper leeward edge of the train. All aerodynamic forces and moments were monitored during the simulation and the underlying flow structures and mechanisms are explained.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 공동학술대회 논문집
• /
• pp.157-164
• /
• 2005

일반적인 물리탐사기법은 도심지내에서 구조물, 전도성 지장물, 차량 등 인공 잡음으로 인하여 그 적용성에 많은 제약을 받는다. 전철이 운행하는 철로 하부에 대한 탐사 역시 전선 및 열차진동이 일반 물리탐사 적용을 제한한다. 본 과업에서는 그 대안으로 선형배열 상시진동탄성파탐사를 적용하였다. 상시진동탐사(mircotremor survey)기법에는 철로를 운행하는 기차와 주변 도로위의 차량에 의한 진동이 오히려 양호한 송신원으로 활용 될 수 있다. 선형배열 상시진동탐사기법에서는 일반적인 굴절법 장비를 이용하여 일상적인 진동을 기록하고, 파동장의 변환을 수행하여 표면파의 분산곡선을 얻는다. 이후 발췌한 분산곡선에 대한 반복적인 수치모델링을 통하여 전단파속도를 구한다. 본 과업에서는 기존 철로를 따라 하부의 터널심도까지의 전단파속도를 전체 터널구간에 대하여 얻기 위하여 40m간격으로 선형배열을 이동하면서 자료를 획득하였다. 측선상의 시추공에서 수행한 SPS검층을 통하여 획득한 전단파속도와 RMR의 비교한 결과 전단파 속도와 RMR이 높은 상관관계에 있음을 확인할 수 있었으며, 상시진동탐사기법을 통하여 획득한 전단파속도 역시 RMR과의 양호한 상관관계를 나타냄을 알 수 있었다. 이러한 상관관계를 이용하여 도심지 철도터널 전체 구간에서 암반분류를 위한 RMR 추정이 가능하였다.

• 한국지반공학회논문집
• /
• 제30권4호
• /
• pp.21-34
• /
• 2014

본 연구는 터널 열화 특성과 이와 관련된 각종 문헌 및 사례조사를 통하여 비교 분석하고 정량적인 해석을 위한 영향인자를 도출하여 입력변수를 결정하고 국내 고속철도 터널의 대표단면(풍화암)에 대하여 수치해석을 실시하였다. 해석 결과는 공용 후 30년 경과 시 열화로 인하여 천단침하량은 7.0%, 지표침하량은 30.2%이 증가하고 내공변위는 9.0mm가 수축 한 이후 점차 수렴되는 경향을 보였다. 또한 이완하중고는 공사 완료 후 50년 경과 시 터널고의 2.55배까지 증가하여 극한상태에서의 Terzaghi의 제안값 보다 상당히 큰 값을 나타내었으며, 이러한 소성영역의 확장으로 인하여 터널 라이닝에 3.20~3.66MPa의 축응력이 추가로 작용하게 되는 경향을 확인하였다. 따라서 이로부터 설계에 반영할 수 있는 정량적인 예측기법을 제안하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.313-336
• /
• 2007

고속철도는 일반철도와는 달리 터널구간에서 여러 가지 공기역학적인 문제가 발생한다. 개활지와 비교하여 크기가 매우 작은 터널에서 고속으로 운행하는 열차는 큰 공기저항을 받게 되어 주행 안정성이 떨어지고, 터널 내의 급격한 압력변동으로 객차 내 승객의 이명감 발생, 터널출구에서의 소음공해 등 일반철도에서는 예상치 못했던 문제를 유발시킨다. 이 같은 문제점을 해결하기 위하여 본 고에서는 공기압의 특성 분석에 대하여 소개하고자 한다. 수치시뮬레이션을 통해 이명감 기준을 만족하는 최적의 단면을 검토하였다. 또한, 경부고속철도를 운행하는 열차에서 객차내 압력을 측정하였고, 화신5터널에서 터널내 압력 및 터널출구에서의 미기압을 측정하였다. 동시에 열차주행 모형실험을 수행하여 수치시뮬레이션의 입력조건으로 사용된 각종 매개변수 등의 적정성을 비교 검증하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권5호
• /
• pp.101-107
• /
• 2017

터널공사의 발파공법의 특성상 여굴 발생은 필연적이라고 할 수 있다. 국내 터널 여굴 관련 설계기준에 의하면 공동구 바닥부의 여굴처리는 채움 10 cm로 되어 있으나 설계 여굴량 이상의 깊이를 모두 콘크리트로 채우게 되면 공사비가 크게 증가한다. 철도터널은 항구적인 콘크리트 궤도를 적용 중에 있다. 그러나 철도터널에서 바닥 여굴이 발생할 경우 압축강도 18 MPa의 콘크리트 채움 시공(T=100 mm)을 하고 있고, 상부에 150 mm ~ 237 mm의 보조도상 콘크리트층, 240 mm 콘크리트 궤도(TCL층)를 시공하는 등의 레일 하부와 터널 암반 사이에 약 600 mm 두께의 콘크리트로 시공하고 있어 경제성이 매우 떨어지는 실정이다. 이 연구에서는 기존터널단면과 변경터널단면에 대해 각각 여굴 깊이에 따라 콘크리트 균열 수치해석 및 콘크리트 균열 위험도 분석, 콘크리트 균열 안정성 확보를 위한 터널 바닥콘크리트 소요 두께에 대한 적정성을 평가하였다.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.655-661
• /
• 2005

For a hydro power plant project, the headrace tunnel having a finished diameter of 3.3m was constructed in volcanic rocks with well-developed vertical joint and high groundwater table. The intake facility was located 20.3 km upstream of the powerhouse and headrace tunnel of 20 km in length and penstock of 440 m in height connected the intake and the powerhouse. The typical caldera lake, Lake Toba set the geology at the site; the caving of the ground caused tension cracks in the vertical direction to be developed and initial stresses at the ground to be released. High groundwater table(the maximum head of 20 bar) in the area of well-connected vertical joints delayed the progress of tunnel excavation severely due to the excessive inflow of groundwater. The excavation of tunnel was made using open-shield type TBM and mucking cars on the rail. High volume of water inflow raised the water level inside tunnel to 70 cm, 17% of tunnel diameter (3.9 m) and hindered the mucking of spoil under water. To improve the productivity, several adjustments such as modification of TBM and mucking cars and increase in the number of submersible pumps were made for the excavation of severe water inflow zone. Since the ground condition encountered during excavation turned out to be much worse, it was decided to adopt PC segment lining instead of RC lining. Besides, depending on the conditions of the water inflow, rock mass condition and internal water pressure, one of the invert PC segment lining with in-situ RC lining, RC lining and steel lining was applied to meet the site specific condition. With the adoption of PC segment lining, modification of TBM and other improvement, the excavation of the tunnel under severe groundwater condition was successfully completed.

• 화약ㆍ발파
• /
• 제13권3호
• /
• pp.19-30
• /
• 1995

NATM as method of tunneling has been applied to construction of domestic subway, roads, rail way, water way etc. Accordingly, we have NATM's many drafts and constructional results, but many problems and accidents have occurred under construction of tunnel using NATM for shortage of technical data. Poorness of constructional improvement, systemic inconsistency etc. Especially, everyone was shocked at Gupo's train wrecking accident lately. The purpose of this thesis is presentation of means for setting technical problems, by looking into Gupo's train wrecking accident and home records that applying NATM in tunneling failed, to minimize future safety accidents we find that the general problems of home fifteen sites having occured accidents is badly geological survey, nonconfirmationi of base rock's state, formal measuring management, shortage of specialists, systemical discrepancy and that disregarding NATM's rules makes general problems. The results of this study are Summarised as follows : 1. We advise repletion of design standards to practice crosshole test for confirming connected rock base on vertical section of tunnel. 2. We advise to practice pre0boring and pre-grouting for a weak layer difficult in applying NATM. 3. We advise systemic improvements that field servicer can construct tunnel of his own free will considering base rock's state at tunnel . 4. We advise that specialist, who can make a conduct and supervise above mentioned items as well as measuring management, should be posted at field.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.92-102
• /
• 1994

NATM as method of tunneling has been applied to construction of domestic subway, roads, rail way, water way etc. Accordingly we have NATM's many drafts and constructional results, but many problems and accidents have occurred under construction of tunnel using NATM for shortage of technical data, poorness of constructional improvement, systemic inconsistency etc. Especially, everyone was shocked at Gupo's train wrecking accident lately. The purpose of this thesis is presentation of means for settling technical problems, by looking into Gupo's train wrecking accident and home records that applying NATM in tunneling failed, to minimize future safety accidents we find that the general problems of home fifteen sites haying occured accidents is badly geological survey, nonconfirmation of base rock's state, formal measuring management, shortage of specialists, systemical discrepancy and that disregarding NATM's rules makes general problems. The results of this study are summarised as follows ; 1. We advise repletion of design standards to practice crosshole test for confirming connected rock base on vertical section of tunnel. 2. We advise to practice pre-boring and pre-grouting for a weak layer difficult in applying NATM. 3. We advise systemic improvements that field servicer can construct tunnel of his own free will considering base rock's state at tunnel. 4. We advise that specialist, who can make a conduct and supervise above mentioned items as well as measuring managements, should be posted at field.