• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.555-563
• /
• 2016

Line capacity of railways is a core criterion to decide maximum trips in accordance with traffic demand and a priority in railway investment to improve transportation capability. Particularly, because two operators will start revenue services in the HSR from mid-2016, the line capacity should be carefully calculated and controlled to avoid conflicts between the maximum number of KTXs, and the number needed to guarantee the effective competition of the operators. Meanwhile, there have been many arguments about calculating the line capacity, because this number is affected by the number of trips by train types, stopping pattern and dwell time in each station, journey time, crossing or passing, safety headway between trains, etc. To deal successfully with these kinds of problems, this study proposes a simulation method to calculate the line capacity that considers train operation according to the operator's service policies.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.585-591
• /
• 2003

Recently, South korea is driving forward the strategy concerning of the logistics center of northeast asia aggressively on the purpose of promoting Busan port & Gwangyang port to the hub-port of northeast asia, In that situation, it is significant that the meaning, construction connecting between south and north railway. Namely, That is the reason why Busan port is satisfied with the combined transport system of not only marine transportation but also railway transportation completely, However, the research and policy is only focused on the connection of north-south railway so far. The ability of Buans railway equipment as the actual role of origin-destination point of TKR(Trans Korean Railway), was not reviewed. Therefore, this research is shown the problem and reality of the railway transport concerning the centralization of Busan port, and the capacity of Busan port railway facility regarding the increase of future container quantity is reviewed and analyzed Moreover, the object, shown the importance of facility expansion such as Gungbu Trans Express between Daegu and Busan and the improvement scheme for railway transportation activation through the analysis of society cost and the logistics cost of the ability of railway facility, is set up.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.697-706
• /
• 2011

There are more than 800 railway steel plate girder bridges which are in use and the total length is approximately 50 km. Among these, it shall be pointed out that non-ballast rail systems which lay on wood sleepers are the most critical members. To strengthen this type of structures, mainly two methods have been applied. The first one is the most typical method which is to replace the girders with slab girder system or steel composite girders and to add ballast. It is not uncommon that the construction cost of substructure is more than ten time higher than that of superstructures and even in this case, the structural uncertainty for the substructures is not diminished. To resolve above mentioned problems, new method was developed to rehabilitate railway steel girder bridge by adding PC-slab using transport equipment. Using this method, substructure strengthen is rarely required because the additional weight to the bridge superstructure is only up to 1.0t/m. Also it was possible to save the construction cost by reducing construction duration and by simplifying the construction process. Experimental construction was performed for Jewon bridge and measurements were performed before and after construction to verify the bridge capacity.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1245-1255
• /
• 2016

The single resonant inverter is widely employed in typical inductive power transfer (IPT) systems to generate a high-frequency current in the primary side. However, the power capacity of a single resonant inverter is limited by the constraints of power electronic devices and the relevant cost. Consequently, IPT systems fail to meet high-power application requirements, such as those in rail applications. Total harmonic distortion (THD) may also violate the standard electromagnetic interference requirements with phase shift control under light load conditions. A power regulation approach with selective harmonic elimination is proposed on the basis of a parallel multi-inverter to upgrade the power levels of IPT systems and suppress THD under light load conditions by changing the output voltage pulse width and phase shift angle among parallel multi-inverters. The validity of the proposed control approach is verified by using a 1,412.3 W prototype system, which achieves a maximum transfer efficiency of 90.602%. Output power levels can be dramatically improved with the same semiconductor capacity, and distortion can be effectively suppressed under various load conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.12
• /
• pp.965-970
• /
• 2016

Fuel used in the steel metallurgy industry is stored in huge stage systems called SILO. Fuel is released by RDM (Rotary Discharge Machine), at the place of utilization. RDM is located in the Silo, and is constituted of a main frame, driving part, discharging part and control part. RDM is combined to a direct motion on the rail in tunnel, having a rotary motion enabled by a motor. In this paper, we calculate the theoretical discharging capacity of RDM to confirm the correlation between design element and discharging capacity of RDM. Also, through structure analysis, we confirm the vulnerable point of RDM when it discharges the storage materials. We hope to apply these results to design a more efficient RDM.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.297-304
• /
• 2003

As the high speed rail to be opened at 2004, the. railroad will dominate over the transportation market in the Seoul-Busan corridor compared to road transport. But, it is obvious that the LOS(level of service) of railroad at 2004 will be worse in the areas that are not served KTX. For the speed-up of conventional line, it is a worldwide trend that tilting trains are served on the conventional railway line. That is the reason serving tilting trains is very efficient to use existing facilities and improve cruise time when capacity is available. In this paper, we suggest 10 routes are replaced with present operating trains(saemaeul, mugunghwa) by the tilting train.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.195-196
• /
• 2011

Recently, the number of high-rise buildings has been on the rise, which has meant that maintenance cost has increased by two and three times, along with the increase in the construction cost. It is suggested that the use of an auto-cleaning robot could increase the productivity and safety of cleaning work, which is mostly done outside of a building. In particular, the guide rail on a high-rise building could be useful in this capacity, as it has the advantage of not being significantly influenced by factors of the external environment, including wind pressure. For this reason, this research is preliminary research into a cleaning automation for a high-rise building, and aims to draw up a scenario for the vertically moving robot.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.271-281
• /
• 2000

A number of variables and environment are concerned for the basic design of train. The design of train ran be optimized by the ruining simulation. And using the simulation result the consuming energy, regenerating power, adhesion coefficient, train traction control capacity are respectable. Considering these variables and for more information operating time, operating period, standard velocity and limit speed, the all factors of train are optimized. The light-tail tram is mainly divided into linear motor train, road surface train, iron wheel train and rubber tire train, and the most profitable one for adhesion coefficient is rubber tire train and the train will be designed.

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.161-169
• /
• 2000

AGT(Automated Guide-way Transit System) was introduced to satisfy the every increasing need for improved urban transportation. The AGT system is classified as medium distance and demand capacity mass transit being introduced for such area with inadequate passenger demand for railway construction but excessive demand for bus service. To decrease initial investment cost it is important that we have to secure the technology system of Light Rail Transit for Korea environment. By utilizing the finite element analysis, the result in this paper is enough to satisfy the strength whish is required. Also for the purpose of safety, it is decided the thickness and frame structure of the undeframe section through the analysis. It is known that carbody is no problem for required design conditions.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1481-1498
• /
• 2007

As railroad industry face the new Renaissance era, effective and efficient maintenance methods for rolling stock operation are required with advanced railroad technology. All kinds of railroad systems such as high speed long distance train, metropolitan mass transit and light rail require systematic maintenance technology in order to maintain the safe railroad operation. Simulation models for detailed operations of the sample maintenance center are developed. In this study, standard maintenance procedures, layout, equipments and number of workers of Siheung Metropolitan Railroad Maintenance Rolling Stock Depot are considered. The proposed simulation models are developed using simulation package ARENA. Three simulation analysis using the developed simulation model are done. First, the bottleneck operation is identified. Second, the relationship between maintenance center size, number of workers and cycle time is analyzed. Lastly, the scheduling performances between PERT/CPM and Critical Chain Project Management(CCPM) are compared.