• 건축역사연구
• /
• 제21권2호
• /
• pp.21-36
• /
• 2012

As wooden construction developed, it was observed that the rafters with corners changed to angled rafters. The change from rafters to angle rafters means that the angle rafters became the most important member in supporting the roof weight as the construction scale increased and structurally developed. The specific installation methods of angle rafters were all unique in Korea, China, and Japan. In East Asia, the angle of the angle rafter gradually decreased along with the development of construction. However, in Joseon Dynasty Korea, the angle of the angle rafter was larger than that of the Gorye era because the method of fixing the corner of the roof more firmly by building the fan-shaped rafter was utilized. The changes to the angle rafter installation method is a unique characteristic of Korea, in that it was developed in a totally different way from the methods used in China and Japan.

• 건축역사연구
• /
• 제29권6호
• /
• pp.29-40
• /
• 2020

This research is conducted focusing on the 7-Dories type wooden buildings showing different rafter installation. This research found the reason why the rafter configuration look different each other and the relationship the between rafters and the Dory. Factors were compared to determine why the rafter configuration show the formal differentiation. The comparison factors are as follows: 1. The type of rafter installation is related to the longitudinal length of the building. 2. The type of rafter installation is related to the number of Kans on the side of the building and is proportionate. 3. The type of rafter configuration is related to the Dory arrangement and is proportionate. 4. The type of rafter configuration is related to the Dory's vertical arrangement. If the Dory arrangement is small, it is identified as two-stage rafter configuration. And if the Dory arrangement is large, it is identified as three-stage rafter configuration. Eventually, it was confirmed that the rafter configuration were affected by the Dory arrangement.

• 건축역사연구
• /
• 제26권2호
• /
• pp.7-14
• /
• 2017

Rafter is a member for roof and plays a role in protecting shaft members under rafter such as pillar, beam and girder from natural environment and to fix by supporting finished materials of roof. It is common in the Korean architecture that rafter cross-section is paired with circular form and Buyeon cross-section is paired with the square shape. However, while there are not many, some architectures have rafter end header in the square shape. The aim of this study is to examine the square shape cases of rafter end header with special reference to stone structure. As a result, among stone structure related to Bangyeon, the majority case is seen at Palgakwondang type Seungtap. It was shown in the Seungtap of monk of Gusanseonmun school in the later Unified Silla to the early Goryeo period that succeeded Seodang Jijang.

• 한국강구조학회 논문집
• /
• 제17권3호통권76호
• /
• pp.347-356
• /
• 2005

최근 들어 강구조 공장건축은 상당부분 P.E.B.시스템으로 지어지고 있으나 관련기술이 대부분 외국에서 수입된 것으로 전용프로그램(예, MBS, LTI 등)에만 의존하고 있고 국내의 설계지침이 없어서 AISC-ASD에 의해 설계하고 있다. 또한 P.E.B.골조의 구조적 거동을 검토한 연구 및 H형강을 이용한 요소기술 개발이 부족한 실정에 있다 특히, 기둥-보(rafter) 접합부는 Extended type end plate에 의한 접합에만 의존하여 과다설계의 경향이 있으므로. 접합부에 대한 구조적 검토가 필요하다. 따라서 이 연구에서는 P.E.B.시스템 공장건물에서 H형강-보(rafter)의 접합부(Extended/Flush type)의 구조성능을 실험적으로 평가하여 구조적, 경제적으로 우수한 P.E.B. 시스템 골조의 설계를 위한 기초자료를 제공하고자 한다.

• 한국CDE학회논문집
• /
• 제18권2호
• /
• pp.148-154
• /
• 2013

Han-ok (the Korean traditional house) is famous for its beauty and healthful aspects. However, its construction cost is too high because of the manual process of parts such as rafter, timber, etc. These days, many people want to build a modernized Korean traditional house at a low cost. In order to do so, the rafter machining process is required to be automatized using a CNC machine. It is also observed that, generally the timber does not have a uniform shape. Therefore, it is also needed to examine the timber shape before starting its processing. This paper presents the concept design of the rafter processing CNC machine, and a 3D laser scanning system. The laser scanner is developed to acquire 3D details of the timber shape. Furthermore, the results of simulated experiments are presented to investigate surface roughness during the machining process of the timber. Since cutting parameters largely influence on surface roughness and cusps formation, it is needed to achieve optimal machining parameters. Several experiments were carried out changing cutting parameters such as cutting tool diameter, feed-rate, and spindle speed.

• 대한건축학회논문집:계획계
• /
• 제36권5호
• /
• pp.117-124
• /
• 2020

This study examined ornamental metals used as architectural members among metal artifacts excavated from ancient Buddhist temples and palaces in Korea. Through this, we approached the decorative characteristics of ancient architecture eaves. 1. The decorations used in eaves of Korean ancient architecture include roof-end tiles and ornamental metal. Through excavation examples, the technique of attaching ornamental metal to the rafters and corner rafters of high-ranking architectures in the 7th and 8th centuries (ornamental metal for rafter end, ornamental metal for corner rafter end), and tosu iron in the 10th century It seems to be fashionable. 2. Several buildings were built in ancient Buddhist temples and palaces. At this time, they differentiated ornamental metal according to the hierarchy of the building. The higher the hierarchy, the greater the difference in the number of ornamental metal installations, materials, and decoration techniques. In addition, ornamental metal used in eaves is an important factor in the discrimination of the times as the type, number of members, and patterns change depending on the era. 3. The great feature of the eaves metal decoration excavated in the 7th and 8th centuries is the attachment of ornamental metal to the rafters and horsetails. This seems to create a sense of grandeur by removing the weight of the roof and giving the impression constructed regardless of gravity by supporting it with non-material materials.

• 헤리티지:역사와 과학
• /
• 제42권2호
• /
• pp.134-153
• /
• 2009

본 연구는 19세기에 중건된 조선시대 창경궁의 내전 전각을 대상으로, 지붕가구를 구성하는 주요 부재들의 치수계획을 고찰하고 서까래의 물매를 결정하는 요소를 분석하여 궁궐건축 내전 전각에 있어서 지붕가구계획의 기법을 밝히고자 하였다. 창경궁 내전 전각의 지붕가구를 형성하는 주요 부재의 치수계획은 다음과 같다. 먼저 평주의 길이는 궁궐지의 기록과 일치하였으며 고주의 계획치수는 촌(寸)단위까지 사용하였다. 영춘헌과 같이 평주의 길이가 촌단위까지 치목되어질 때 고주의 길이는 완척으로 계획되어 평주와 고주 사이에 형성되는 장연의 물매는 일정한 값을 갖는 것으로 판단된다. 한편 초익공 부재는 대체로 1.2척(尺)의 높이를 가지며 이익공의 경우에는 0.8척으로 초익공보다 0.4척 정도 작게 나타났다. 한편 장혀의 단면 폭은 0.3척으로 규모에 관계없이 일정하며, 다만 단면 높이의 경우 0.6~0.7척으로 대별된다. 도리의 직경은 1척을 기준으로 0.1척을 가감(加減)하였으며, 장연의 직경은 전각의 규모에 따라 0.5~0.6尺의 사이에 있는 것으로 나타났다. 한국 전통목조건축 지붕가구의 형성에서 서까래의 물매결정은 먼저 장연의 물매를 정한 후, 건물의 전체 높이를 결정하는 종도리의 높이를 정하고, 중연을 걸기 위해 동자주의 위치와 높이를 조정하는 방식으로 지붕가구를 계획하는 것으로 파악되었다. 특히 장연 물매는 건물 규모에 따라 특별히 정해진 값이 있는 것이 아니라 전면 평주높이와 포작의 구성 등에 따라 자연스럽게 결정된 것으로 추정된다. 그리고 중연을 사용하는 경우 중연물매의 결정방식은 양통 어칸을 등간격으로 분할한 후, 동자주의 위치 또는 길이를 조정하는 방법을 사용하였던 것으로 추정할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.727-728
• /
• 2012

• 건축역사연구
• /
• 제25권3호
• /
• pp.23-35
• /
• 2016

The purpose of this study is to classify types of the eaves structure of buildings with the Jusimpo-type structure and to analyze the characteristics of each eaves structure. For this objective, forty buildings were selected and investigated. The results of analysis are summarized as follows. First, the main members of framework which handle a load burden on the long-rafter(長椽) are classified as the Jusim-dori(柱心道里) and the Oemok-dori(外目道里). Based on the method of handling a load, the eaves structure is classified into three types; the Jusim-processing-type(柱心中心形), the Oemok-processing-type(外目中 心形), and the Oemok-processing-variant-type(外目中心變異形). The Jusim-processing-type is the set where the internal length of a long-rafter is longer than the length of the eaves on the basis of the center of a column. The Oemok-processing-type is the set where the external length of a long-rafter is longer than the internal length of it. And the Oemok-processing-variant-type is the set where the internal length of a long-rafter is longer than the external length of it, but it is shorter than the length of the eaves which includes the extruded length of a Buyeon(浮椽). Second, the Jusim-processing-type had been generally adopted in the Jusimpo-type structure of the Goryeo Dynasty. But since the 17th century, the Oemok-processing-type had the highest application rate. Third, the change from the Jusimdori-processing-structure to the Oemokdori-processing-structure means that the long-rafter is moved to the direction of outside of the building, and thus the Jung-dori(中道里) is gradually moved to the column center. And, the change of the eaves with the Jusimpo-type structure was not a process for increasing the length of the eaves but a process for adopting the advantages of the Dapo-type structure by changing the arrangement of purlin. Fourth, the change from the Jusimpo-type structure to the Dapo-type structure could be understood as a process for moving the main point for handling a load from the Jusim-dori to the Oemok-dori.

• 한국농촌건축학회논문집
• /
• 제10권1호
• /
• pp.101-109
• /
• 2008

It is very hard to find out Tongbanga-millhouse installed nearby a streamlet to use water with Tongbanga(a kind of water-mill) to polish cereals by pounding like a visage of its old days. It plays an important part in folkloric, architectural and educational aspects. The purpose of this study is to analyse the architectural features of Tongbanga and millhouse itself so that to find the way how to build and fabricate the materials and frame members. Therefore this study has been focused on the composition principle and fabrication method of Tongbanga-millhouse on the side of architecture. The fabrication methods of its house in accordance with regular sequences are as follows. ${\cdot}$ Firstly the decision of location of Tongbanga-millhouse and Hwak(a big mortar made of stone). ${\cdot}$ Slantly three rafter installation at an angle of $50^{\circ}$ to err on the safe side and then slantly fifteen rafter installation making a circular cone shape. ${\cdot}$ Installation of twigs to be circles from bottom to top. ${\cdot}$ Manifoldly covering of trunks peeling the barks from flax plants. ${\cdot}$ Threefoldly thatching with upside barks of oak trees. ${\cdot}$ Placing woods alike rafter on the bark thatches as a weight not to fly away by wind. ${\cdot}$ Binding woods alike rafter with vines of arrowroots to maintain the proper place. The decayed Tongbanga-millhouse by means of upper ways was restored out of all recognition.