• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.866-871
• /
• 2003

In automobile, the introduction of electronically commutated motors has been accompanied by a proliferation of electronic devices. With this proliferation of electronic devices, an emphasis has been placed on EMC issues. This paper is proposed to use SRM as a radiator cooling fan in automotive applications. To drive SRM, Energy efficient C-dump converter is applied. It is verified more efficient than other converters through simulation and experiments. And also SRM is valid automotive applications that have strict EMC standards. It is compared SRM with BLDC and DC motor by experiments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.27-30
• /
• 2003

In order to get the infrared ray radiator with high efficiency emission, the starting raw material $Fe_2O_3$ powder is heat-treated under the oxygen pressure log[$PO_2$] = -13~15 at $800^{\circ}C$ for 2hours. It has shown that the radiation rate was larger than 0.85 at the relatively high temperature($400^{\circ}C$), and decreased slowly with increasing the temperature from 50 to $400^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1317-1319
• /
• 1994

The thermal properties of Cordierite$(2MgO.2Al_2O_3.5SiO_2)$ + 30 [wt%]clay + X[wt%]MnO_2$ of infrared radiator have been investigated as a function of $MnO_2$ additives (X=0, 0.1, 0.25, 0.5, 1.0, 1.5, 2.0, 2.5). The thermal expansion coefficient was decreased and the spectral emissivity was increased only in the below $4.5{\mu}m$ wavelength with increasing amaunts(wt%) of $MnO_2$ additives. Also, the infrared radiator of Cordierite system which spectral emissivity was approximately 1.0 can be attainable at from $4.5{\mu}m$ to $8{\mu}m$ wavelength. The spectral emissivity was decreased from $8{\mu}m$ to $14{\mu}m$ at X=2.5.

• ETRI Journal
• /
• v.16 no.1
• /
• pp.1-15
• /
• 1994

A computationally-efficient approach to the calculation of the transient field of an acoustic radiator was developed. With this approach, a planar or curved source, radiating either continuous or pulsed waves, is divided into a finite number of shifted and/or rotated versions of an incremental source such that the Fraunhofer approximation holds at each field point. The acoustic field from the incremental source is given by a 2-D spatial Fourier transform. The diffraction transfer function of the entire source can be expressed as a sum of Fraunhofer diffraction pattern of the incremental sources with the appropriate coordinate transformations for the particular geometry of the radiator. For a given spectrum of radiator velocity, the transient field can be computed directly in the frequency domain using the diffraction transfer function. To determine the accuracy of the proposed approach, the impulse response was derived using the inverse Fourier transform. The results obtained agree well with published data obtained using the impulse response approach. The computational efficiency of the proposed method compares favorably to those of the point source method and the impulse response approach.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.225-228
• /
• 2000

Addition effects of metal oxide on the characteristics of infrared radiator of porous cordierite have been investigated. The porosity was increased with adding the graphite for 2MgO $.$ 2A1$_2$O$_3$$.$5SiO$_2$. The microstructure and the spectral emissivity were investigated as a function of metal oxide additives. The prosity and the emissivity were decreased with increasing amounts of CuO additives. The prosity and the emissivity were increased with increasing amounts of CoO, MnO$_2$ additives. The infrared radiator of cordierite system which spectral emissivity was 0.927 and 0.928 at from 5$\mu\textrm{m}$ to 20$\mu\textrm{m}$ wavelength as a 9wt% of CoO and MnO$_2$ additives.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.516-523
• /
• 1998

Radiation efficiency of a cylindrical shell whose surface vibrates under harmonic distribution is investigated by theoretical solutions and Boundary Element Method. The vibration modes of a cylindrical shell is determined from experiment and is compared with the result of Finite Element Method. Harmonic vibration response of the cylindrical shell under the point excitation and the radiation phenomena from its response is analyzed by Finite Element Method and Boundary Element Method.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.70-75
• /
• 1995

Recently, for the thermal system design in an engine room, the importance of the numerical analysis on the heat and fluid flow has been recognized. In the present study, the flow inside an engine room with complex geometry was analysed by use of TURBO-3D program being developed in KIST. Radiator and Cooling fan were simulated by porous media and momentum sources, and the result shows a good agreement with our expectation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.74-79
• /
• 1995

A theoretical method has been considered for the analysis of an annular slot radiator in a metal-backed cylindrical cavity with coaxial feed. In order to check the validity of the method theoretical values of the input return loss and radiation pattern are compared with experimental values. There is good agreement between them.

• Journal of Industrial Convergence
• /
• v.7 no.1
• /
• pp.33-43
• /
• 2009

The purpose of this study was to analysis to jobs inducing the Musculoskeletal Disorders(MD) and improve the working environment. The case study was conducted at S company where makes radiator case of heavy profile equipment. Most of works are plating and welding. Bending and welding are works which induce MD. The adjustable workstation and fatigue prevention mat were recommended for the welding and bending. A standing posture was recommended for the welding.

• Journal of computational fluids engineering
• /
• v.19 no.4
• /
• pp.86-93
• /
• 2014

Increased demand of power-transformer's capacity inevitably results in an excessive temperature rise of transformer components, which in turn requires improved radiator design. In this paper, numerical simulation of the cooling performance of an ONAN-type (Oil Natural Air Natural) radiator surrounded by air was performed by using CFX. The natural convection of the air was treated with the full-model. The present parametric study considers variation of important variables that are expected to affect the cooling performance. We changed the pattern and cross-sectional area of flow passages, the fin interval, the flow rate of oil and shape of flow passages. Results show that the area of flow passage, the fin interval, the flow rate of oil and shape of flow passages considerably affect the cooling performance whereas the pattern of flow passages is not so much influential. We also found that for the case of the fin interval smaller than the basic design, the temperature drop decreases while a larger interval gives almost unchanged temperature drop, indicating that the basic design is optimal. Further, as the flow rate of oil increases, the temperature drop slowly decreases as expected. On the other hand, when the shape of flow passages are changed, temperature drop is increased, indicating that the cooling performance is enhanced thereupon.