• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.356-363
• /
• 2011

Vibrations and noise in electrical machines are directly related to the characteristics of the radial forces on one hand, and mechanical behavior on the other [1, 4]. The characteristics of these forces depend on the air gap flux density, which is also influenced by other factors, such as stator slots and poles, saturation level, winding type, and certain faults. The aim of this work is to investigate the effect of eccentricity and demagnetization faults on electromagnetic noise generated by the external surface of Permanent Magnet Synchronous Machine [PMSM]. For this purpose, an analytical electromagnetic vibroacoustic model is developed. The results confirm the effect of eccentricity and demagnetization fault in generating some low modes radial forces.

• 대한기계학회논문집
• /
• 제10권5호
• /
• pp.601-610
• /
• 1986

본 연구에서는 음향학적 고찰로써 최근 디지를 처리기술의 발달에 따른 근접 한 2점의 음압으로 부터 테니스 라켓의 공기입자속도를 근사적으로 구하기 위하여 두 개의 마이크로폰을 이용하여 계산된 음향인텐시티는 구물의 오무드 해석법에 의해 구 해진 테니스 라켓의 동적 특성과 비교 검토함으로써 진동과 음의 발생기구를 구명하고 측정계의 비접촉에 의한 테니스 라켓의 동적 거동을 규명하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.813-816
• /
• 1988

This study is to investigate the adhesive strength of composite material's interface on the experimental methode of tree growth in the material. The results are as follows 1) The irradiations of ultrasonic energy cause the mechanical vibration in the polymer composite materials of fluid state, so then bring about physical dispersion and heat for inorganic materials, being supposed to produce chemical interlinking reaction, decreasing of voids between filler and matrix. 2) As the intensity of ultrasonic energy and its irradiated time are larger, the tree inception and breakdown voltages increase and the tree growing is slower. so we obtain that the interface adhesive force can be strengthened by the irradiation of ultrasonic energy.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.212-222
• /
• 1994

In the annular Modified Chemical Vapor Deposition process using two concentric tubes, the inner tube is heated to maintain high temperature gradients to have high thermophoretic force which can increase particle deposition efficiency. However, higher axial velocity in a narrow gap between inner and outer tubes can result in a longer tapered entry length. In the present paper, a new concept using an annular jet from the inner tube is presented and shown to significantly reduce the tapered entry length with maintaining high efficiency. Effects of a jet injection on heat transfer, fluid flow and particle deposition have been studied. Of particular interests are the effects of jet velocity, jet location and temperature on the deposition efficiency and tapered length . Torch heating effects from both the previous and present passes are included and the effect of surface radiation between inner and outer tubes is also considered.

• 전기전자학회논문지
• /
• 제21권3호
• /
• pp.297-308
• /
• 2017

By using electron beam evaporation under appropriate conditions, we obtained graphene intercalated sheets on Si(111) with an average crystallite size less than 11nm. The formation of such nanocrystalline graphene was found as a time-dependent function of carbon deposition at a substrate temperature of $1000^{\circ}C$. The structural and electronic properties as well as the surface morphology of such produced materials have been confirmed by reflection high energy electron diffraction, Auger electron spectroscopy, X-ray photoemission spectroscopy, Raman spectroscopy, scanning electron microscopy, atomic force microscopy and scanning tunneling microscopy.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.579-585
• /
• 2001

This paper proposed a method of reducing a noise in hard disk drive. This method is performed through three parts of procedures. First procedure is sound-oriented experiment, which contains sound intensity techniques and measurements of sound pressure level and sound power. Second is vibration-oriented experiment, which contains FRF(Frequency Response Function) analysis and disk vibration reduction techniques. And the third is computer-oriented simulation, which contains modal analysis and force vibration analysis using ANSYS and sound radiation prediction using SYSNOISE. As these three parts can affect with each other, they should be considered and conducted simultaneously. Through this procedure sound power is measured 2.7 Bels in idle-spinning mode, which is the lowest noise level in the HDD industries.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1393-1393
• /
• 2001

This paper reviews the Lawson formula which predicts the sound field of a point force in arbitrary motion. The acoustic density was represented by an integral of integrand including the generalized function and its partial derivative at retarded time. After skillful integration, a mathematically exact formula was yielded with some terms which were still remained in need of numerical calculations. The significance of further mathematical progress is discussed in this paper. And also, the adequacy of procedures deriving the far- and near-field terms is investigated from the viewpoint of radiation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.555-564
• /
• 2001

Wheel-rail noise is normally classified into three catagories ： rolling, squeal and impact noise. In this paper, rolling noise caused by the irregularity between a wheel and rail is analysed as follows： The irregularity between the wheel and rail is assumed as combination of sinusoidal profiles. Wheel-rail contact stiffness is linearized by using Hertzian contact theory, and then contact force between the wheel and rail is calculated. Vibration of the rail and wheel is calculated theoretically by receptance method or FEM depending on the geometry of wheel or rail for the frequency range of 100-5000Hz, important for noise generation. The radiation caused by those vibration is computed by BEM. To verify this analysis tools, rolling noise is calculated by preceding analysis steps using typical roughness data and it is compared with experimental rolling noise data. This analysis tools show reasonable results and used for the prediction of KTX rolling noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.106-112
• /
• 2000

Axial fans are widely used in heavy machines due to their ability to produce high flow rate for cooling of engines. At the same time. the noise generated by these fans causes one of the most serious problems. This work is concerned with the low noise technique of discrete frequency noise. The prediction model. which allowed the calculation of acoustic pressure at the blade passing frequency and it's harmonics. has been developed by Farrasat. This theory is founded upon the acoustic radiation of unsteady forces acting on blade. To calculate the unsteady resultant force over the fan blade. Time-Marching Free-Wake Method are used. The fan noise of fan system having unsymmetric engine-room is predicted. In this paper, the discussion is confined to the performance and discrete noise of axial fan and front part of engine room in heavy equipments.

• 천문학회지
• /
• 제33권1호
• /
• pp.19-28
• /
• 2000

In the earlier papers we analyzed the axisymmetric, nonstationary electrodynamics of the central black hole and a surrounding thin accretion disk in an active galactic nucleus. In this paper we analyze the axisymmetric, nonstationary electrodynamics of the black hole magnetosphere in a similar way. In the earlier papers we employed the poloidal component of the plasma velocity which is confined only to the radial direction of the cylindrical coordinate system. In this paper we employ a more general poloidal velocity and get the Grad-Shafranov equation of the force-free magnetosphere of a Kerr black hole. The equation is consistent with the previous ones and is more general in many aspects as it should be. We also show in more general approaches that the angular velocity of the magnetic field lines anchored on the accreting matter tends to become close to that of the black hole at the equatorial zone of the hole.