• 제목/요약/키워드: Radiation field Size

검색결과 389건 처리시간 0.028초

6MV 선형가속기의 비대칭 조사야의 변화에 따른 선량분포 (Study on 6 MV Photon beam Dosimetry by Asymmetric Collimator Variation of Linear Accelerator)

  • 윤주호;이철수;염하용
    • 대한방사선치료학회지
    • /
    • 제12권1호
    • /
    • pp.91-104
    • /
    • 2000
  • Recently linear accelerator in radiation therapy in asymmetric field has been easily used since the improvement and capability of asymmetrical field adjustment attached to the machine. It has been thought there have been some significant errors in dose calculation when asymmetrical radiation fields have been utilized in practice of radiation treatments if the fundamental data for dose calculation have been measured in symmetrical standard fields. This study investigated how much the measured data of dose distributions and their isodose curves are different between in asymmetrical and symmetrical standard fields, and how much there difference affect the error in dose calculation in conventional method measured in symmetrical standard field. The distributions of radiation dose were measured by photon diode detector in the water phantom (RFA-300P, Scanditronix, Sweden) as tissue equivalent material on utilization of 6 MV linear accelerator with source surface distance (SSD) 1000 mm. The photon diode detector has the velocity of 1 mm per second from water surface to 250 mm depth in the field size of $40mm{\times}40mm\;to\;250mm{\times}250mm\;symmetric\;field\;and\;40mm{\times}20mm\;to\;250mm{\times}125mm$ asymmetrical fields. The measurements of percent depth dose (PDD) and subsequent plotting of their isodose curves were performed from water surface to 250mm dmm from Y-center axis in $100mm{\times}50mm$ field in order to absence the variability of depth dose according to increasing field sizes and their affects to plotted isodose curves. The difference of PDD between symmetric and asymmetric field was maximum $4.1\%\;decrease\;in\;40mm{\times}20mm\;field,\;maximum\;6.6\%\;decrease\;in\;100mm{\times}50mm\;and\;maximum\;10.2\%\;decrease\;200mm{\times}100mm$, the larger decrease difference of PDD as the greater field size and as greater the depth, The difference of PDD between asymmetrical field and equivalent square field showed maximum $2.4\%\;decrease\;in\;60mm{\times}30mm\;field,\;maximum\;4.8\%\;decrease\;in\;150mm{\times}75mm\;and\;maximum\;6.1\%\;decrease\;in\;250mm{\times}125mm$, and the larger decreased differenced PDD as the greater field size and as greater the depth, these differences of PDD were out of $5\%$ of dose calculation as defined by international Commission on radiation unit and Measurements(ICRU). In the dose distribution of asymmetrical field (half beam) the plotted isodose curves were observed to have deviations by decreased PDD as greater as the blocking of the beam moved closer to the central axis, and as the asymmetrical field increased by moving the block 10 mm keeping away from the central axis, the PDD increased and plotted isodose curves were gradually more flattened, due to reduced amount of the primary beam and the fraction of low energy soft radiations by passing thougepth in asymmetrical field by moving independent jaw each 10 h beam flattening filter. As asymmetrical radiation field as half beam radiation technique is used, the radiation dosimetry calculated in utilizing the fundamental data which measured in standard symmetrical field should be converted on bases of nearly measured data in asymmetrical field, measured beam data flies of various asymmetrical field in various energy and be necessary in each institution.

  • PDF

INFRARED EMISSION FROM SPHERICAL DUST CLOUDS

  • Lee, Hyung-Mok;Hong, Seung-Soo;Yun, Hong-Sik;Lee, Sang-Gak
    • 천문학회지
    • /
    • 제25권2호
    • /
    • pp.111-128
    • /
    • 1992
  • Infrared emissions from spherical dust, clouds are calculated using quasi-diffusion method. We have employed graphite-silicate mixture with power-law size distribution for the dust model. The grains are assumed to be heated and cooled by radiative processes only. The primary heating source is diffuse interstellar radiation field. hut the cases with an embedded source are also considered. Since graphite grains have higher temperature than silicate grains, the observed IR emission is mainly due to graphite grains, unless the fraction of graphite grains is negligibly small. The color temperature of Bok globules obtained from IRAS 60 and $100{\mu}m$ data are found to be consistent with the dust cloud with graphite-silicate mixture exposed to average interstellar radiation field. The color temperature is sensitive to the external radiation field, but rather insensitive to the size distribution of the grains. We found that the density distribution can be recovered outside the beam size using the inversion technique that assumes negligible optical depth. However, the information within the beam size is lost for if beam convolved intensity distributions are used in deriving density profile.

  • PDF

Linear Accelerator를 이용한 Stereotactic Radiosurgery 방법 (A Method of Stereotactic Radiosurgery Using A Linear Accelerator)

  • 나수경;박재일
    • 대한방사선치료학회지
    • /
    • 제6권1호
    • /
    • pp.146-153
    • /
    • 1994
  • A modified irradiation technique utilizing a linear accelerator for radiation surgery within the brain was performed in 41 cases of patients with anteriovenous malformation(AVM), astrocytoma, meningioma. etc. The treatment planning and dosimetry of small field for stereotactic radiosurgery with 10 MV X-ray isocentically mounted linear accelerator will be presented dose with field size, the central axis persent depth dose and the combined moving beam dose distribution. The three dimensional dose planning of stereotactic focusing irradiation on small size tumor region was perfomed with dose planning computer system(Therac 2300) and was verified with film dosimetry. The more the number of strip and the wider the angle of arc rotation, the larger were the dose delivered on tumor and the less the dose to surrounding the normal tissues. In this study, the using machine and method was as fellowing. 1) Apparatus : NELAC-1018 10MV X-ray 2) Strip No. : Select the 5-7 strips 3) Cone and field size are from $1{\times}1cm^2$ to $3.5{\times}3.5cm^2$, and special circular cone designed for the purpose of minimized the risk to normal tissue and those size are $0.7{\~}3.6cm{\phi}$.

  • PDF

IMRT 및 IMRS에서 Small Field의 선량분포 확인시 SAD 변화에 따른 측정의 유용성 평가 (IMRT and IMRS Checking the Dose Distribution in the Small Field Evaluation of Measurement by Changes in SAD)

  • 고승영;김성준;박길용;손미숙;이남기;김진수
    • 대한방사선치료학회지
    • /
    • 제22권1호
    • /
    • pp.33-39
    • /
    • 2010
  • 목 적: 세기변조방사선수술 및 세기변조방사선치료 시 치료계획과 실제 조사에 의해 형성된 선량분포의 일치성 확인은 필수적이다. 하지만 매트릭스형 팬톰의 특성 상 조사면이 작아질수록 큰 조사면에 비해 그 정확도가 떨어진다. 본 연구는 축선원거리(source-axis distance, SAD)를 조절하여 기하학적으로 조사면 크기를 변화시키고 이에 대한 선량분포를 측정 및 분석함으로써 정확도를 개선하고 그 유용성을 평가해보고자 한다. 대상 및 방법: 실험은 본원에서 보유하고 있는 노발리스 선형가속기(BrainLAB, Germany)의 6 MV 광자선을 이용하였으며, 대체적으로 조사면 크기가 작은 IMRS 환자 25명을 대상으로 하였다. 이들을 조사면의 크기에 따라 3그룹으로 분류하였다. 조사면 크기 변화에 따른 선량분포 확인을 위해, SAD를 80에서 130 cm로 변화시킨 후 각각 매트릭스형 팬톰(MatriXX, Scanditronix Wellhofer, IBA, Germany)을 이용하여, 선량분포를 측정하였다. 측정된 값은 분석프로그램(Omnipro-ImRT, Scanditronix Wellhofer, IBA, Germany)을 통해 치료계획장치(I-Plan3.0, BrainLAB, Germany)로부터 획득된 각 환자의 선량분포와 비교 및 분석하고, 감마값(gamma value)으로 나타내었다. 결 과: SAD 80, 100, 그리고 120 cm에서 감마값은 조사면의 크기가 $3\;cm^2$ 이하의 환자에서는 평균 0.939, 0.969, 그리고 0.979 로 각각 나타났으며, 그 이상 $5\;cm^2$ 이하의 환자는 0.962, 0.983, 그리고 0.988이었다. $5\;cm^2$ 이상의 환자는 0.982, 0.990, 그리고 0.992이었다. 결 론: $3\;cm^2$ 이상의 조사면은 SAD 100, 120 cm에서 정확도를 신뢰할 만큼 충분히 많은 전리함들을 포함하므로 그 값에 큰 변화가 없다. 하지만 80 cm로 했을 경우 조사면 크기가 $3\;cm^2$ 이하가 되어 정확도가 감소하였다. 그 이하의 작은 조사면은 SAD를 변화시켜 기하학적 크기가 $3\;cm^2$ 이상이 되게 측정하는 것이 그 정확도가 증가하는 것으로 나타났다. 따라서, 작은 조사면의 경우에는 SAD의 따른 조사면 크기를 증가시켜 측정하는 것이 좀 더 정확한 결과를 도출할 것으로 판단된다.

  • PDF

X선격자 성능시험에 미치는 인자의 검토 (A Study of Factors Affecting the Grid-test)

  • 이인자;신화수;김창균;허준;강홍석;박준철;윤철호
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제10권1호
    • /
    • pp.61-67
    • /
    • 1987
  • Authors tested the grid functions with various thickness of acryl phantom, radiation field size and diameter of shielding lead. The results are as followed: 1. The characteristic values of grid are affected by phantom thickness, but free from radiation field size in the diagnostic useful range. 2. The quantity of scattered radiation was decreased according to the diameter of shielding lead under 20mm, and then the diameter the smaller the better, in accordance with proposed KS standard. 3. The quantity of primary radiation was increased a little at the 80mm diameter radiation field size, but did not have much differences. Therefore, it was thought that it is needed to limit beam size in case of absolute values in accordance with any standards, but it has no matter to use 100 mm diameter in case of relative values just to campare with.

  • PDF

의료용 선형가속기의 소조사면에 대한 검출기 종류에 따른 평가 (Evaluation of the Small Field of for the Detector Type Medical Linear Accelerator)

  • 이동운;정강교;신귀순;조평곤
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제39권2호
    • /
    • pp.177-184
    • /
    • 2016
  • 최근 선형가속기를 이용한 방사선치료는 세기조절방사선치료, 정위적방사선치료 등이 널리 사용되고 있다. 이러한 방사선 치료기법은 일반적으로 역방향치료계획을 사용함으로써 소조사면을 제외하기 어렵다. 그러므로 소조사면의 선량특성에 관한 정확한 측정이 필요하다. 따라서 유효체적이 서로 다른 검출기를 이용하여 소조사면에 대한 깊이선량백분율, 빔측면도, 그리고 선량출력계수를 측정하여 각 검출기의 선량특성 평가하고자 하였다. 실험 결과 X-선 6 MV에너지에 대한 빔선질($PDD_{20}/PDD_{10}$)은 $10{\times}10cm^2$에서 Diode 검출기는 Pinpoint 검출기에 비해 2.4%로 높았다. 모든 조사면에서 유효체적이 작은 Diode 검출기가 다른 검출기들과 50%이상 작은 반음영을 보여 공간분해능이 우수한 것으로 평가되었다. 출력선량계수는 조사면 $2{\times}2cm^2$에서 Semiflex 검출기 다른 검출기에 비해 2%정도 적게 측정되기 시작해서 조사면 $1{\times}1cm^2$에서는 20%정도 차이를 보이며 유효성이 없는 것으로 판단된다. 조사면 $1{\times}1cm^2$에서 Diode 검출기와 Pinpoint 검출기의 측정값은 13%정도 차이를 보였다. 조사면 $3{\times}3cm^2$이하에서는 검출기의 유효체적에 따른 출력선량계수의 차이가 크므로 가능한 유효체적이 작은 검출기를 사용해야 될 것으로 사료된다.

휘진성 형광체 (BaFBr:$Eu^{2+}$)를 이용한 영상의학분야에서 산란선 특성에 관한 평가 (Evaluation of Scatter Radiation in Digital Radiological Condition by using Photostimulated Luminescence (BaFBr:$Eu^{2+}$))

  • 민정환;한성규;김정민;이주아;김기원;정회원
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제37권2호
    • /
    • pp.85-91
    • /
    • 2014
  • 본 연구는 휘진성 형광체를 이용하여 디지털 의료영상시스템의 환경에서 산란선에 의한 영상 특성을 연구하였다. 아크릴 팬텀을 사용하여 관전압 (50 kVp부터 120 kVp까지), 조사야($4{\times}4cm^2$부터 $26{\times}26cm^2$까지), 팬텀의 두께 (1 cm부터 25 cm까지)를 각각 변화시켜 실험을 실시하였다. 실험 방법은 영상을 ImageJ와 특성곡선을 사용하여 분석하였다. 관전압은 50 kVp ~ 70 kVp에서는 관전압이 증가하면서 일차선에 대한 산란선의 비율도 증가하지만, 80 kVp부터는 일정한 비율을 나타내었다. 조사야가 증가함에 따라 일차선에 대한 산란선의 비율은 증가한다. 팬텀 두께가 증가함에 따라 산란선이 증가한다.

4MV X-선을 이용한 조직보상체 두께비 연구 및 응용 (A study on tissue compensator thickness ratio and an application for 4MV X-rays)

  • 김영범;정희영;권영호;김유현
    • 대한방사선치료학회지
    • /
    • 제8권1호
    • /
    • pp.55-61
    • /
    • 1996
  • A radiation beam incident on irregular or sloping surface produces an inhomogeneity of absorbed dose. The use of a tissue compensator can partially correct this dose inhomogeneity. The tissue compensator should be made based on experimentally measured thickness ratio. The thickness ratio depends on beam energy, distance from the tissue compensator to the surface of patient, field size, treatment depth, tissue deficit and other factors. In this study, the thickness ratio was measured for various field size of $5cm{\times}5cm,\;10cm{\times}10cm,\;15cm{\times}15cm,\;20cm{\times}20cm$ for 4MV X-ray beams. The distance to the compensator from the X-ray target was fixed, 49cm, and measurement depth was 3, 5, 7, 9 cm. For each measurement depth, the tissue deficit was changed from 0 to(measurement depth-1)cm by 1cm increment. As a result, thickness ratio was decreased according to field size and tissue deficit was increased. Use of a representative thickness ratio for tissue compensator, there was $10\%$ difference of absorbed dose but use of a experimentally measured thickness ratio for tissue compensator, there was $2\%$ difference of absorbed dose. Therefore, it can be concluded that the tissue compensator made by experimentally measured thickness ratio can produce good distribution with acceptable inhomogeneity and such tissue compensator can be effectively applied to clinical radiotherapy.

  • PDF

Mechanical Check용 Spherical Device의 제작 및 특성 평가 (Practicability Assessment of Spherical Type Mechanical Check Device (SMCD))

  • 이병구;김건오;권영호
    • 대한방사선치료학회지
    • /
    • 제19권1호
    • /
    • pp.55-62
    • /
    • 2007
  • 목 적: PACS의 도입에 발맞추어 시작된 디지털 의료영상은 현재 방사선 진단 및 치료 영역에서 일반화되었으며 특히 진단 영역에서는 눈부신 발전을 거듭하고 있다. 치료영역에서의 디지털 영상 구현은 상대적으로 느린 성장과정을 거쳐 오늘에 이르고 있다. 본 논문은 이러한 아날로그에서 디지털로 변화하는 흐름을 인식하여 정도관리(Quality Assurance) 업무 중 기계적 점검(Mechanical check) 부분을 디지털 영상 기반 업무로 대체하여 수행하고, 기존의 육면체 또는 사각형틀의 개념을 탈피한 구형(球形)의 Spherical type mechanical check device (SMCD)를 고안하여 그 실용성을 실험하였다. 대상 및 방법: 선원에서 영상 detecter 간의 거리가 항상 일정하고, SMCD의 중심까지 거리가 일정하다면 어느 방향에서 방사선으로 SMCD를 조사하더라도 그 크기는 항상 일정하게 영상으로 표현 될 것이다. 이를 위해 Polyester P.E 재질의 정확한 반구(半球) 2개를 자체 제작하여 그것을 합쳤을 때 정원(正圓)의 구(球)가 되도록 하였다. 결 과: SMCD를 이용하여 방사선조사면과 광조사면의 일치도, 방사선조사면 크기의 정확도($5{\times}5$, $10{\times}10$, $15{\times}15cm^2$), Collimator field 크기의 정확도($5{\times}5$, $10{\times}10$, $15{\times}15cm^2$), Gantry rotation isocenter check, Collimator rotation isocenter check, Room laser accuracy check, Collimator rotation angle check와 Couch rotation angle check 등 기존의 기계적 점검을 디지털 영상을 이용하여 실행할 수 있었다. 결 론: 기존의 Flat 또는 정육면체 형태의 기계적 점검 장치로는 쉽게 하기 힘든 non-coplanar field에 적용되는 Gantry와 Couch가 동시에 rotation 되었을 때 그 isocenter의 일치도를 실시간으로 확인할 수 있었다.

  • PDF

6MV 방사선의 물리학적 Penumbra (The Physical Penumbra of the 6MV X-ray)

  • 조문준;강위생
    • Radiation Oncology Journal
    • /
    • 제9권2호
    • /
    • pp.333-336
    • /
    • 1991
  • 충남대학교병원 치료방사선과내 설치되어 있는 6MV선형가속기를 이용하여 음영을 측정하여 다음과 같은 결과를 얻었다. 1) 조사면 크기가 커질수록 음영폭은 중가하였으며 10x10 Cm 이상의 조사면에서는 계산한 음영폭보다 측정치가 대개 크게 나타났다. 조사면이 커질수록 이 차이는 더욱 증가하였다. 2) 깊이가 증가하면 음영폭도 증가하였다. 3) $90\%\~20\%$의 음영폭이 $80\%\~20\%$의 음영폭보다 컸으며 조사면이 커지고, 깊이가 증가할 수록 이 차이는 더 커졌다.

  • PDF