• Solar Energy
• /
• v.17 no.2
• /
• pp.23-33
• /
• 1997

This paper reviews the advanced solar cell structures used in space. These are the structures which incorporate the back surface field and reflectors with very shallow and lightly doped emitters. Their use in space has shown that the thinner cells are more resistive to radiation damage than the thicker ones. It has been found that the charged particles affect both the surface and bulk of the cells used in space. This causes degradation in the output power, which in effect, can be explained by the degrading diffusion length of the cells. The PERL cells showed higher BOL(beginning of life) efficiency and almost the same EOL(end of life) efficiency as structures with wrap-around contact configuration fabricated on 10 ${\Omega}cm$ resistivity substrates. This observation lead to a conclusion that, the space cells do not necessarily need to have very high BOL efficiency except in specific missions which require such.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.299-305
• /
• 1995

Visible photoluminescing (PL) silicon at room temperature has been prepared by a dry technique, that is, by spark processing, contrary to anodically etched porous silicon. PL peak maximum of photoluminescing spark processed Si was shifted to blue 520 nm. The stability of spark processed Si towards degradation upon UV radiation was found to be extremely high. Results from high resolution TEM, XRD and XPS studies suggest that spark processed silicon involves minute nanocrystalline (polycrystalline) particles which are imbedded in an amorphous matrix, preferably $SiO_2$.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.93-96
• /
• 2007

In this paper, the testing equipment for evaluating aging characteristics of outdoor silicone rubber insulator resulting from the environmental aging effect with regards to sunlight(UV) was developed. Influence of sunlight effect aging is seriously increase due to destruction of ozone layer which is occurred by consumption of fossil fuel. For this purpose, silicone rubber was aged under the artificial sunlight by exposure of xenon lamp radiation in the accelerating aging chamber and various test and analysis were performed such as breakdown strength, contact angle. And FT-IR analysis has been followed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.6
• /
• pp.586-591
• /
• 2010

VLC (Visible Light Communication) is a wireless communication method using light that is visible to the human eye. It has a major advantage that it causes no interference to RF-based devices. This makes wireless communication possible in RF hazardous areas such as nuclear facilities. In order to apply VLC communication in harsh environment of nuclear power plant, the high luminance LEDs, which are key components of the VLC communication, have been gamma-ray irradiated at the dose rate of 4kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced color-center was formed in the LED housing cap made of transparent plastic or acryl material. The beam degradations of high luminance LEDs by high dose-rate gammaray irradiation are analyzed using color CCD image processing technology.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.447-450
• /
• 2002

Recently polymeric insulators and arresters are being used for outdoor high voltage applications. Polymeric insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage(UHV) transmission lines. Their advantages are light weight, vandalism resistance and hydrophobicity. Polymeric insulator kind are a relatively new technology, but their expected life is still unknown. In this paper, the material property for polymeric insulating material such as silicone rubber and EPBM is investigated by cross-link time and the relation between tracking resistance and W resistance is analyzed by IEC 60587 and W aging experiment.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1404-1406
• /
• 1998

The outdoor polymeric insulating materials such as silicone rubber, ethylene propylene diene monomer(EPDM), ethylene vinyl acetate(EVA) and epoxy are aged by various natural environment with the long-term performance in outdoor. In this paper, the effects of UV-ray on surface of silicone rubber were investigated by using the weather-Ometer. The accelerated aging stresses were simulated by UV radiation. high temperature and humidity as well as water spray. These the aging characteristics were examined through contact angle measurements, tracking resistance test, FT-IR and SEM/EDS analysis. the experimental results showed that tracking resistance decreases with increase in the UV-ray irradiation period. But the surface of silicone rubber kept hydrophobicity. It is found that the inorganic filler such as $Al(OH)_3$ improves tracking resistance and the $TiO_2$ is very effective in preventing degradation of silicone rubber surface from UV-ray.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1432-1435
• /
• 1998

Influences of carbon black contents on the tracking resistance, tan $\delta$ and dielectric constant volume resistivity and dielectric strength of EPDM compounds before and after a exposure to UV radiation were investigated. Carbon black content up to 1.5 phr have a positive effect to improve the resistance to tracking and erosion, since carbon black diminish the leakage current. Results from the study reveal that both tan $\delta$ and dielectric constant volume resistivity and dielectric strength are unaffected by adding of carbon black up to 2.0 phr and carbon black have a significant effect to suppress the photo-degradation of EPDM compounds.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.4
• /
• pp.39-44
• /
• 2014

The elemental composition of electro-deposited black Cr solar selective coatings before and after heating in air by using secondary ion mass spectrometry (SIMS) was investigated for optical property analysis. In addition, black Cr selective coating exposed by solar radiation for 5 months was compared with heated sample. SIMS investigation shows that $OH^+$ bearing ions were related to a near surface region of CrOH and CrO compound. The optical degradation of this coating after heating at $500^{\circ}C$ reveals that diffusion of the Cu and Ni elements in substrate material, the chemical interactions adjacent to the interface, and the interface width broadening.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.441-446
• /
• 1998

As for safety assessment of a radioactive waste disposal facility, radiation dose to inadvertent intruders is evaluated according to scenarios related to intruder's postulated activities at the disposal site after the end of Institutional Control Period(ICP). Simple trench and Below Ground Vault(BGV) are considered for this study as alternative disposal systems, and different scenarios are applied to each disposal type. The results show that 300 years of ICP is needed for simple trench and 100 years for BGV. Even for BGV, concentration of long-lived radioactive nuclides should be limited considering degradation of BGV after 300 years.

• Korean Journal of Microbiology
• /
• v.11 no.2
• /
• pp.79-88
• /
• 1973

In order to investigate the effect of gamma radiation on Salmonella typhi, Ty2, the components of amino acids, proteins, carbohydrates and lipids in irradiated cells were compared with those in unirradiated control cells respectively. The results obtained were as follows ; 1) The inactivation curves of Salmonella typhi with $Co^{60}$ .gamma.-ray irradiation were exponential over a wide range to the irradiated doses. 2) Dose for the inactivation factor of $10^8$ was 94.0 Krad in physiological saline or in phosphate buffered saline, 104.2 Krad in nutrient broth, 220.4Krad in frozen state, 552.0 Krad in dried state, 88.3 Krad in the abundance of oxygen and 188.0 Krad in the deficience of oxygen, respectively. 3) Five consecutive irradiation of Salmonella typhi suspension at the dose of 90 Krad gave no additional increase in resistance. 4) Even at the smallest dose of 500 Krad, compositions of amino acids, proteins, carbohydrates, and lipids were more or less decreased and the distinct banding patterns were also lost possibly due to degradation of the protein molecules.