• The Journal of the Acoustical Society of Korea
• /
• v.37 no.1
• /
• pp.39-45
• /
• 2018

Compressive sensing allows recovering an original signal which has a small dimension of the signal compared to the dimension of the entire signal in a short period of time through a small number of observations. In this paper, we proposed a method for detecting tonal signal which caused by the machinery component of a vessel such as an engine, gearbox, and support elements. The tonal signal can be modeled as the sparse signal in the frequency domain when it compares to whole spectrum range. Thus, the target tonal signal can be estimated by S-OMP (Simultaneous-Orthogonal Matching Pursuit) which is one of the sparse signal recovery algorithms. In simulation section, we showed that S-OMP algorithm estimated more precise frequencies than the conventional FFT (Fast Fourier Transform) thresholding algorithm in low SNR (Signal to Noise Ratio) region.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.2
• /
• pp.120-124
• /
• 2009

The concept of biostimulation of wounds by low-level laser therapy(LLLT) is attracting considerable attention. Although its effect on whole tissues has been studied quite extensively, the biological and cellular mechanisms underlying LLLT have not been clarified. In an experimental radius fracture in rabbits, Tang and Chai reported that LLLT enhanced the activity of red blood cells, macrophages, fibroblasts, chondrocytes, and osteoclasts within the fracture area. The purpose of the present study was to evaluate the effect of LLLT with a GaAlAs diode laser device on bone healing in rabbit mandibular fractures. We use 12 rabbits for this study. All rabbits were fractured mandible angle area using saw in anesthetic condition. In control group(n=6), none treatment was performed at fracture site. In experimental group(n=6), LLLT with a GaAlAs diode laser was radiated at fracture site daily for 7 days. All rabbits were sacrificed at 6 weeks later from performed fracture day. We studied the immunohistochemical staining of CD34 and Vimentin and the histochemical analysis for calcium and phosphorus content. The results were as follows. 1. In the histological and immunohistological staining, after 6week, fibroblasts, osteogenic cells and collgen fibers were observed more in experimental group than in control group. 2. In the histochemical analysis, the amount of calcium and phosphorus contents of the experimental group were more than the control group. From the results obtained, we suggest that the bone healing is stimulated by low-level laser irradiation in bone fractures.

• Journal of Advanced Navigation Technology
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

In this research, we develop an airborne equipment radiating S/C-band signal to a target located at a long distance. RF interface of the equipment comprises band-specific transmitters and an broadband antenna to satisfy EIRP(effective isotropic radiated power) requirements. The equipment is in a shape of a POD like an aircraft fuel tank. The measured weight of the equipment is 119.8 kg, the CG(center of gravity) is 1391.35 mm and the MOI(moment of inertia) are 46.07 ± 0.05(I_yy) kg·㎡, 45.36 ± 0.09(I_zz) kg·㎡. All results are found to meet the requirements for aircraft installation. To verify flight safety, EMI(electromagnetic interference) tests (RE102, CE102), environmental tests (high/low temperature operation, altitude), intra-system EMC(electromagnetic compatibility) and HERP(hazards electromagnetic radiation personnel) tests have been conducted and all the test results met the requirements. It is confirmed that the equipment could be mounted on the aircraft by meeting all electrical and mechanical requirements.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.3
• /
• pp.89-96
• /
• 2018

This study aims to develop a fully passive smart sensing tag utilizing RF (Radio Frequency) energy harvesting technology at UHF (Ultra High Frequency) band of 915MHz. To optimize the power collected under various radiated conditions, an efficient energy harvesting module exploiting a boost circuit with maximum power point tracking (MPPT) is employed. Specifically, the proposed tag features two orthogonal antennas to enhance its capability of both energy scavenging and data transmissions. The experimental result shows that the developed smart sensor tag can scavenge an RF input power of as low as 0.19mW at a distance of 4 meters for a 3.6Vdc output. Furthermore, the proposed smart sensor tag performs the feasibility of completely autonomous monitoring food freshness at 2 meters with a low-power sensor array.

• The Journal of Korean Medicine
• /
• v.28 no.4
• /
• pp.86-94
• /
• 2007

Objective : Kuesu point is a newly discovered point, it is located in 3-cun from the centre of sacrum laterally, paralleled to the 4th foramen on the sacrum. This controlled trial was to evaluate the superior effect of Kuesu point on back pain which radiated to lower extremities. Methods : Randomized Controlled Trial (RCT) and Single Blind in patient was designed. Patients (n=31) were randomized to two groups, Kuesu-point acupuncture group (Group A, n=16) and non Kuesu point acupuncture group (Group B, n=15). Group A was acupunctured on B25 (大腸兪), B26 (關元兪) and B60 (崑崙) with Kuesu point. Group B was acupunctured on the same points without Kuesu point. The clinical subjects were female patients. Beside acupuncture, the other therapies were excluded. Clinical period was three weeks total. Each group was treated 4-5 times per week for 3 weeks. The outcome measurements were The Estimation Index of Backache (quality of life), Pain Rating Scale (pain intensity) and other physical examinations (ROM, SLR, etc.). Results : 31 patients (Group A: n=16, Group B: n=15) were Randomized, 6 of them dropped out. Eventually 25 patients (Group A: n=15, Group B: n=10) were included in the analysis. Group A acupunctured on Kuesu point scored more significant Estimation Index of Backache and lower PRS (Pain Rating Scale) than Group B acupunctured without Kuesu point (p=0.003/2). It turned out that the group acupunctured on Kuesu point show meaningful high improvement index. And other examination's results showed that the treatment effects of Group A are twice as better as Group B. Conclusion : These results suggest that Kuesu point acupuncture was more effective on lower back pain and improved the life quality of patients, being compared with non Kuesu point acupuncture.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.102-109
• /
• 2006

In this paper, the system level EMC radiated emission test results of KoDSat(Korea Demonstration Satellite), its affects upon the Launch vehicle and H/W improving methods regarding its over exceed value of EMC specification are discussed. Regarding its over exceed value, we estimated that DAU of KoDSat generated the exceeded EMC noise source, and these test results were analyzed using the EMC2000 tool to find out how did it affect the FTS(Flight Termination Subsystem) of KSLV-1(Korea Small Launch Vehicle). To diminish the EMC noise source of UHF(430.1Mhz) band level, we redesigned the DAU power board to be applied the various schemes for EMI noise reduction such as grounding, shielding and EMI filtering, and also verified these reworks to analyze its diminishing affects in UHF band level by means of performing the DAU box level EMC test and performing the second KoDSat's system level EMC test.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.26-33
• /
• 2013

BMI nozzles in bottom head of the nuclear vessel are one of major components in nuclear power plants. The BMI nozzles have high possibility to generate PWSCC(primary water stress corrosion crack) according to recent foreign case although operation temperature is lower then the upper head of the nuclear vessel. Thus, nondestructive inspection of the BMI nozzles is required. But, inspection of BMI nozzles is not easy since the BMI nozzles placed in high radiated area and inside the nozzles filled with boric acid. Thus, in this study, a TOFD transducer for inspection of BMI and automated scanner system with water were developed. Also, validation of performance of the developed transducer and system are performed using specimens with artificial defects.

• Korean Journal Plant Pathology
• /
• v.14 no.5
• /
• pp.402-407
• /
• 1998

Phytophthora rot on jujube fruit has occurred at several cultivation areas in Kyung-buk and Kyung-nam provinces. Symptoms consisted of brownish to reddish rot on fruits resulting in early drop or mummification. The causal fungus isolated from infected fruits and adjacent leaf stalks was identified as Phytophthora citricola, which has never been reported in Korea. Sporangia were semi-papillate, noncaducous and highly variable in shapes. Plerotic oospores with paragynous antheridia were abundant is single cultures. Sporangia of two isolates were measured as 38-76$\times$20-40 ${\mu}{\textrm}{m}$ and averaged 51.4$\times$27.0 and 55.6$\times$36.0 ${\mu}{\textrm}{m}$. Oogonia were ranged from 26 to 36 ${\mu}{\textrm}{m}$ and averaged 31.3 and 32.0 ${\mu}{\textrm}{m}$. Colony pattern was slightly radiated with sparse aerial mycelia on common media. Minium, optimum and maximum temperatures for mycelial growth were recorded at 7, 25, and 32$^{\circ}C$, respectively. Among tested media, 10% V8A was the best and $25^{\circ}C$ was better than 15$^{\circ}C$ for oospore formation of the fungus. The jujube isolates of P. citricola were readily differentiated from other closely related species in the genus, namely; P. nicotianae, P. citrophthora, P. cactorum, P. capsici, and P. plalmivora on the basis of PCR-RFLP of r-DNA. The fungus showed strong pathogenicty to jujube, apple, pear, orange, persimmon and eggplant, and relatively weak to citron, tomato, pepper and cucumber. In this study, P. citrocola is firstly identified and jujube fruit rot caused by the fungus is recorded as a new disease in Korea.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.8
• /
• pp.575-582
• /
• 2015

This paper deals with the dispersion relation of the waves sustained in a cylindrical shell submerged in the fluid. The waveguide finite method and the boundary element method are used to predict the dispersion characteristic of the cylindrical shell. The dispersion diagram of the cylinder is estimated from the eigenvalue problem and the forced vibration response. It follows that the water-loading leads to the decrease of the cut-on frequencies and the phase speeds of the bending waves. On the contrary, the longitudinal waves and the torsional waves are hardly affected by the fluid, and therefore the order of the cut-on frequencies of the waves is changed. The acoustic dispersion diagram is also estimated from the forced acoustic response to identify the characteristics of the wave radiated to the fluid. It follows that the acoustic waves on and near the surface of the cylinder are the same as those in the structure. But at the far field the acoustic waves caused by subsonic waves e.g., the bending waves disappear as the increase of the distance. Conclusively, the characteristics of waves in cylindrical shells are significantly affected by water-loading in terms of the cut-on frequency, the wave speed, the order of the cut-on and radiation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.1
• /
• pp.73-79
• /
• 2001

In this study, a submerged plate-type breakwater is considered, which is supported by elastic foundation. This breakwater makes use of wave phase interaction among the incident, diffracted and radiated waves. We apply a three-dimensional singularity distribution method within the linear potential theory in order to describe the wave field. The submerged plate is assumed to be rigid and the elastic support be a linear spring with constant stiffness. A typical rectangle plate is exemplified for numerical calculation. The thickness of the plate is carefully selected in order to guarantee the solution to be stable by checking the condition number of the system matrix. A parametric study is carried out for examining the effect of the stiffness of the elastic support on performance of the breakwater. We also examine the effect of the submerged depth.