• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.533-539
• /
• 2020

Real-time service (RTS) provided by IGS provides correction for GNSS orbit and clock via internet, so it is widely used in fields that require real-time precise positioning. However, the RTS signal may be lost due to an unstable Internet environment. When signal disconnection occurs, signal prediction can be performed using polynomial models. However, the RTS changes rapidly after the GNSS navigation message issue of data (IOD) changes, so it is difficult to predict when signal loss occurs at that point. In this study, we proposed an algorithm to generate continuous RTS correction information by applying the difference in navigation trajectory according to IOD change. The use of this algorithm can improve the accuracy of RTS prediction at IOD changes. After performing optimization studies to improve RTS prediction performance, the predicted RTS trajectory information was applied to precision positioning (PPP). Compared to the conventional method, the position error is significantly reduced, and the error increase along with the signal loss interval increase is reduced.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.199-206
• /
• 2015

For real-time precise positioning, IGS provides ephemeris predictions (IGS ultra-rapid, IGU) and real-time ephemeris estimates (real-time service, RTS). Due to the RTS data latency, which ranges from 5 s to 30 s, a short-term prediction process is necessary before applying the RTS corrections. In this paper, the real-time performance of the RTS correction and IGU prediction are compared. The RTS correction availability for the GPS satellites observed in Korea is computed as 99.3%. The RTS correction is applied to broadcast ephemeris to verify the accuracy of the RTS correction. The 3D orbit RMS error of the RTS correction is 0.043 m. Prediction of the RTS correction is modeled as a polynomial, and then the predicted value is compared with the IGU prediction value. The RTS orbit prediction accuracy is nearly equivalent to the IGU prediction, but RTS clock prediction performance is 0.13 m better than the IGU prediction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.682-684
• /
• 2004

The effect of 1/f noise by the random telegraph signal(RTS) on the phase noise and the jitter of CMOS ring Oscillator is investigated. 10 parallel piece-wise-linear current sources connected to each node model the RTS signals. The In, the power spectral density and the jitter of output of the ring oscillator are simulated as functions of the amplitude and time constant of RTS current source. It is confirmed that the increase of amplitude of RTS is directly related to the increase of the width of phase noise md the value of jitter. The shorter the time constant is, the wider width of FET peak and the larger value of cycle to cycle jitter are.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.425-432
• /
• 2016

When user estimates user's position, GPS positions can be obtained from the navigation message transmitted from the GPS. However, the broadcast ephemeris cannot be used in the applications required high-level accuracies because it can cause errors of several meters. To correct satellite positions and clocks, user can use RTS corrections provided by IGS. In this paper, the accuracy of broadcast and RTS corrections are analyzed by comparing with the IGS final for 3-months. The RTS errors are analyzed for each user's locations and satellite blocks. The correlations between errors and shadow condition, and solar and geomagnetic activities are analyzed. The latency is applied to the RTS corrections, and these are extrapolated by polynomial. Then, the extrapolated RTS are compared with true RTS. The single-day performances of the PPP by broadcast ephemeris and RTS corrected ephemeris are analyzed. As a result, RTS 3D orbit and clock errors are 1/20 and 1/3 less than broadcast ephemeris errors. 3D positioning error of the RTS is 1/5 less than that of broadcast ephemeris.

• IE interfaces
• /
• v.16 no.2
• /
• pp.195-200
• /
• 2003

In this paper, the selective use of RTS and CTS frames is considered to analyze the capacity of IEEE 802.11 WLAN (Wireless Local Area Network). The RTS and CTS frames are used to transmit the data frames longer than dot11RTSThreshold according to IEEE 802.11 specification. The analysis of the optimal RTS-CTS threshold is derived to maximize the capacity of IEEE 802.11 WLAN. And, numerical examples are also presented for IEEE 802.11 a and b WLANs.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1067-1072
• /
• 2008

This paper introduces the RTS method developed by the ASHRAE. In addition, a load calculation program was developed based on the RTS method and then the calculation logic and procedure are explained in detail. The developed program was designed to allow easy and precise predictions of the building load.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.519-524
• /
• 2006

This paper introduces the RTS method developed by the ASHRAE. In addition, a load calculation program was developed based on the RTS method and then the calculation logic and procedure are explained in detail. The developed program was designed to allow easy and precise predictions of the building load.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.310-312
• /
• 2005

무선 Ad-hoc 네트워크상에서 hidden node problem을 해결하기 위해 도입된 RTS/CTS의 사용여부는 네트워크의 처리량(throughput)에 영향을 미친다. 이는 RTS/CTS가 hidden node problem을 해결해주지만 거기에서 발생하는 overhead 때문에 처리량이 떨어질 수도 있기 때문이다. 기존 관련 연구에서는 RTS/CTS의 사용여부를 패킷의 크기에 따라 달리 해야 한다고 말하고 있다. 그리고 이를 구현하기 위해서 RTSThreshold라는 값을 사용하고 있다. 만약 이 값보다 패킷의 크기가 작으면 RTS/CTS는 사용 되지 않고, 만약 이 값보다 패킷의 크기가 크면 RTS/CTS가 사용된다. 이렇게 RTS/CTS의 사용여부를 결정해주는 RTSThreshold값을 결정하기 위해선 네트워크의 처리량에 영향을 줄 수 있는 모든 인자들을 고려해 보아야 할 것이다. 조사한 바에 의하면 이미 관련 연구에서 physical preamble의 크기, 노드의 수, 그리고 data rate와 RTSThreshold와의 관계를 연구 했었지만, 그밖에 네트워크의 처리량에 영향을 줄 수 있는 carrier sense range나 네트워크의 크기와의 관계는 연구가 되지 않았었다. 따라서 본 논문에서는 이 두가지 인자와 RISThreshold와의 관계를 살펴보고자 모의실험을 수행하였고 그 결과를 분석하였다. 두 인자가 어느 정도 RTSThreshold를 결정하는데 영향을 줄 것이라 예상했었지만, 실험 결과를 분석한 결과 carrier sense range나 네트워크의 크기는 RTSThreshold를 결정하는데 크게 영향을 주지 않는 것으로 나타났다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1713-1718
• /
• 2004

It has been known that 1/f noise of MOSFET is generated by the superposition of single random telelgraph signals (RTS). In this study, jitters caused by 1/f noise of MOSFET are analysed with RTS supplied to all of the nodes of the CMOS ring oscillator under investigation. Through the analysis of the variations of jitters and jitter ratios with varying values of the amplitude of RTS, it is found that the jitters and the jitter ratios are proportional to the amplitude of RTS. And the analysis of FFT of the outputs of the ring oscillator reveals that the jitters are closely related to the phase noise of the high order harmonics of the ring oscillator outputs.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.2
• /
• pp.246-254
• /
• 2008

In this paper, a new efficient hidden node detection method is proposed to decide whether the RTS/CTS mechanism is necessary to resolve the hidden node problem for the data transmission of each node in infrastructure mode IEEE 802.11 wireless LANs. The nodes, for which the RTS/CTS mechanism is found to be not necessary by the hidden node detection method, can transmit their data frames without performing the RTS/CTS exchange. Only the nodes, for which the RTS/CTS mechanism is found to be necessary by the hidden node detection method, perform the RTS/CTS exchange before their data frame transmissions.