• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.355-358
• /
• 2002

In this paper, we propose RTP(Real-Time Transport Protocol) based image transport system to transport still images in real-time after JPEG2000 compression, which is still image compression standard for next generation. To add RTP packet on UDP packet, the image transport system inserts packetizer and depacketizer process into transmitter and receiver of RTP data, respectively. We apply the proposed system to several image and compare the transport time to TCP-based method.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.254-257
• /
• 1996

A Rapid Thermal Processing (RTP) system operated below $500^{\circ}C$ has been designed and constructed. It uses an optical pyrometer for measuring wafer temperature, the sensing range of pyrometer is from $2.0{\mu}m$ to $2.4{\mu}m$. To remove the interference effect by IR emitted from lamps an IR filter is adapted which uses water. The best condition for Al alloy using the RTP system is $425^{\circ}C$ for ten seconds. The RTP system uses many lamps for supplying enough power in processing wafer because the absorption wavelength range of IF filter is from $1.3{\mu}m$ to $4.0{\mu}m$. However, reproducibility and uniformity is reduced due to the difference of lamp characteristics. Therefore, for improving the reproducibility and uniformity new RTP system using one lamp is designed. The new RTP system uses a focusing mirror and it focuses the light of lamp. The curverture of the focusing mirror is controlled to supply uniform power in processing wafer. The result of computer simulation shows the possibility of new RTP system using one lamp.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.6
• /
• pp.460-471
• /
• 2004

Since the RTP is suitable for real-time data transmission in multimedia services like VoD, AoD, and VoIP, it has been adopted as a real-time transport protocol by RTSP, H.323, and SIP. Even though the RTP protocol stack for embedded systems has been in great need for efficient support of multimedia services, such a stack has not been developed yet. In this paper, we explain embeddedRTP which supports the RTP protocol stack at the kernel level so that it is suitable for embedded systems. Since embeddedRTP is designed to reside in the UBP module, existing applications which rely ell TCP/IP services can proceed the same as before, while applications which rely on the RTP protocol stack can request HTP services through embeddedRTp API. EmbeddedRTP stores transmitted RTP packets into per session packet buffer, using the packet's port number and multimedia session information. Communications between applications and embeddedRTP is performed through system calls and signal mechanisms. Additionally, embeddedRTP API makes it possible to develop applications more conveniently. Our performance test shows that packet-processing speed of embeddedRTP is about 7.5 times faster than that oi VCL RTP for multimedia streaming services on PDA in spite that its object code size is reduced about by 58% with respect to UCL RTP's.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.434-437
• /
• 1997

In this paper, we present an $H^{\infty}$ controller design of RTP system satisfying robust stability and performance using weighted mixed sensitivity minimization. In industrial fields, RTP system is widely used for improving the oxidation and the annealing in semiconductor manufacturing process. The main control factors are temperature control of wafer and uniformity in the wafer. The control of temperature and uniformity has been solved by PI control method. We improve robust stability and performance of RTP system by the design of $H^{\infty}$ controller using the weighted mixed sensivity function. An example is proposed to show the validity of proposed method.d.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.292-294
• /
• 2001

VoIP(Voice over IP) system은 현재 크게 2가지 형태로 진행되어가고 있다. 첫 번째는 H.323을 이용한 방법이고, 두 번째는 SIP(Session Initiation Protocol)를 이용한 방법이다. H.323은 실제 데이터를 전송하기전 호처리에 많은 signaling이 이루어지는 관계로 SIP보다 많은 RTT(Round Trip Time)를 소모하게 된다. 따라서 매우 복잡하고, LAN환경을 바탕으로 만들어서 확장성면에서도 여러 문제점을 가지고 있다. 그래서 본 논문은 호처리는 SIP를 이용하고, 실제 음성전송은 RTP(Real-Time Transport Protocol)와 RTCP(RTP Control Protocol)를 이용하는 시스템 구현을 제시한다. RTP는 실시간 특성을 가지는 데이터에 대해서 종단간 전송 서비스를 제공해주는 프로토콜로, 어떠한 인코딩에도 적합한 프레임워크를 제공한다. 그런데, RTP는 완전한 하나의 프로토콜이 되기 위해서는 RTP와 페이로드 포맷이 함께 제공되어야 하므로, 구현시스템은 음성신호를 PCM(Pulse Code Modulation), ADPCM(Adaptive Differential PCM)등의 여러 압축기술을 이용하여 파일을 생성하여 실시간으로 RTP와 RTCP를 이용하여 전송하는 방법을 제시한다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.6
• /
• pp.500-505
• /
• 2000

This paper deals with wafer temperature uniformity control essential in rapid thermal processing (RTP). One of the important control objectives of RTP is to keep the temperature over the wafer surface as uniformly as possible. For this, a discrete time state equation around the operating point is first identified by using the subspace fitting method, and a multivariable LQG(Linear Quadratic Gaussian) controller is designed based on the identified model. Simulation and experimental results show improvement in temperature uniformity over the conventional PID method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.571-572
• /
• 2006

RTP (rapid thermal pressing), one of micro-pattern replication techniques like hot embossing, is focused on achieving shorter cycle time. DFSS(Design for Six Sigma) has been applied in order to enhance the completeness of the development process for RTP system. According to DIDOV roadmap, we derived design concepts and subsequently decided the main performances, design factors, and components for RTP system. In the design process of RTP system using finite element analysis, it was realized that its structural characteristics affect large area replicability. Optimizing structural design factors, based on CAE, it was checked out that its large area replicability could be improved in a virtual test. Finally, we have a plan to validate the large area replicability of the developed RTP system, by performing micro-pattern replication tests with polymeric sheets.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.121-122
• /
• 2002

The main principle of radiation therapy is to deliver optimum dose to tumor to increase tumor cure probability while minimizing dose to critical normal structure to reduce complications. RTP system is required for proper dose plan in radiation therapy treatment. The main goal of this research is to develop dose model for photon, electron, and brachytherapy, and to display dose distribution on patient images with optimum process. The main items developed in this research includes: (l) user requirements and quality control; analysis of user requirement in RTP, networking between RTP and relevant equipment, quality control using phantom for clinical application (2) dose model in RTP; photon, electron, brachytherapy, modifying dose model (3) image processing and 3D visualization; 2D image processing, auto contouring, image reconstruction, 3D visualization (4) object modeling and graphic user interface; development of total software structure, step-by-step planning procedure, window design and user-interface. Our final product show strong capability for routine and advance RTP planning.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.6
• /
• pp.667-675
• /
• 1999

In this paper, we propose a robust controller design of RTP(Rapid Thermal Processing) system using structured uncertainty approach. Using the weighted mixed sensitivity function, we solve the robust stability problem against disturbance and temperature variation, and design a $\mu$ controller using curve fitting method against structured uncertainty. Also the reduction method should be requried because of the difficulty of implementaion with the obtained high order controller. We dal with robust stability and performance of RTP system by the design of $\mu$ controller for original model and Schur balanced reduced model. Finally the simulation results are proposed to show the validity of the proposed method.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1653-1656
• /
• 2003

In this paper, we implemented a web-based communication system using Motion JPEG and RTP. MJPEG compression method is used for compression of the image in order to film and transmit the moving image information in the real time, and the RTP(Real-Time Transport Protocol) which differs from the existing TCP and UDP is used for the data transmission.