• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.265-270
• /
• 2003

We divide networks of an organization into internal network and external network to distribute the load of web server, and allocate separate web server for each network. The performance of web server for internal networks can be affected seriously by RTO(Retransmission Timeout). The value of RTO set by default in the OS of an web server is so large that it degrades the performance of web server. Therefore, this paper suggests not useing but applying conventional algorithm to calculate RTO, but to apply newly controlled value of RTO, and it showed improvement of the performance of web server.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.514-516
• /
• 2004

오늘날 RTOS가 운영되는 시스템이 고안정성을 요구할수록 임베디드 소프트웨어인 RTOS의 중요성은 날이 갈수록 증대하고 있다 검증된 RTOS의 개발을 목표로 본 논문에서는 RTOS의 태스크 스케줄러를 정형명세하고, 정형명세된 스케줄러가 가져야 하는 몇 가지의 검증특성들을 모델체킹 기법을 통해서 검증하였다. 또한 에스테럴로 정형 명세된 스케줄러에서 자동 생성된 C 소스를 사용하여 직접 태스크를 스케줄 해 주는 간단한 RTOS를 제작함으로서 검증된 RTOS를 제작 할 수 있는 방법을 제시 하고자 한다.

• Journal of Software Assessment and Valuation
• /
• v.17 no.2
• /
• pp.91-99
• /
• 2021

In the current business environment where dependence on IT has increased rapidly, the risk from disasters or cyber-attacks is also increasing. Business continuity, the ability to continue to provide service in the event of a business disruption caused by a disaster, is essential. In other words, you need to have a plan in place to keep your core business functions uninterrupted with rapid recovery within a predetermined Recovery Time Objective (RTO) and Recovery Point Objective (RPO) time frame. In this paper, we propose a disaster recovery system construction method that can minimize RTO and RPO to ensure business continuity. The system configuration adopts Tier 7 disaster recovery model, synchronous storage replication, hot disaster recovery site, and operation management automation solution. This ensures continuity of core business with virtually no data loss and minimal RTO and RPO.

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.220-224
• /
• 2002

본 논문에서는 웹 서버의 부하가 급증하면서 대두된 네트워크 과부하를 해결하기 위한 방법으로 서버분산처리 방식과 RTO(retransmission time out : 재전송타임아웃)간을 조정하는 기법을 이용하였다. 부하 분산을 위한 방법으로는 기존의 NAT 기반의 가상서버 방식과 비슷하나, 기존의 가상서버에서 서버들을 선택하는 스케줄링 방법을 이용하지 않고 네트워크 주소(IP)룰 통한 서버 분산방법을 선택하였다. 이를 위해 Linux 기반의 PC에 라우터론 구축하였고 여기에 실제 IP를 할당하였으며, 라우터를 경유하여 연결된 두개의 서버에는 가상 IP를 할당 내부접속용과 외부접속용으로 나누어 서버 분산이 이루어지게끔 하였다. 이러한 서버 분산은 학교라는 즉. 웹서버의 접속이 내부접속 비율과 외부접속 비율 어느 한쪽으로도 크게 기울지 않는 네트워크 환경을 고려한 것이다. 네트워크의 성능 평가에 있어 가장 기본이 될 수 있는 응답시간은 전송거리와 트래픽량에 비례한다. 이에 외부접속용 서버와 내부접속용 서버 각각에 RTO 값을 다르게 적용시킴으로써 전체적인 Delay의 변화를 확인해 볼 수 있다. 이는 전송거리가 길 경우 생길 수 있는 패킷 손실을 고려한 것으로 패킷 손실로 인하여 재전송이 이루어질 경우 재전송 time이 RTO를 통하여 이루어지며 이러한 RTO의 적절한 값은 전체적인 응답시간에 영향을 미칠 수 있다는 것에 기인한 것으로 RTO값을 전송거리가 긴 외부접속용 서버에는 전송거리가 짧은 내부접속용 서버에 비해 길게 적응시킴으로써 전체적인 응답시간의 개선을 유도하였다

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.6
• /
• pp.786-796
• /
• 1999

Background: It has been anticipated that the amount and composition of mucin are changed in patients with chronic airway diseases. We evaluated whether RTO3(mAb against rat tracheal mucins) could quantify the amount of mucin from the airway in the patients with chronic airway diseases. Methods and results; 1) RTO3 was bound to high molecular weight of mucin based on Western blot in sputum and BALF from patients with chronic airway diseases. 2) The goblet cells and submucosal glands in main bronchus from human were observed by PAS stain. And immunohistochemical stain with RTO3 showed immunoreactivity on some goblet cells. 3) The amount of mucin was more increased in patients with chronic airway diseases compared to those in normal subjects. 4) In the exacerbation of asthmatics, mucin amounts were more increased than stable asthmatics. Conclusion: We suggested that secreted mucin in chronic airway diseases can be quantified by ELISA with RTO3.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.6
• /
• pp.716-722
• /
• 2003

This study determined the optimum dosage for coagulation reactions of red tide organisms (RTO) using a combination of ignited oyster shell powder (10sp) and loess and examined the electrokinetic and rheological characteristics of their flocs. Two kinds of RTO, Cylindrotheca closterium and Skeletonema costatum, were sampled in Masan Bay and cultured in the laboratory. Coagulation experiments were conducted using various concentrations of IOSP, loess, IOSP+1oess, RTO, and a jar tester RTO cell numbers were counted for both the supernatant and RTO culture solution. The removal rates increased rapidly with increasing IOSP concentrations up to 50 mg/L and loess concentrations up to 800 mg/L. A removal rate of $100\%$ was reached at 400 mg/L of IOSP and 6,400 mg/L of loess. The highest increment $(16.7\%)$ of the rates of coagulation reaction occurred using both IOSP and loess (50+200 mg/L) in comparison with IOSP alone. The rate of coagulation reaction using both IOSP and loess (50+200 mg/L), $90.6\%,$ was similar to employing either IOSP of 150 mg/L or loess of 3,200 mg/L. All of the coagulation liquids for RTO, IOSP (200 mg/L), loess (200 ma/L), and IOSP+1oess (200+200 mg/L) revealed non-Newtonian fluid properties and therefore their shear rate vs. shear stress curves were non-linear. The coagulation liquids revealed elastic body properties at a lower shear rate increasing in the following order: RTO, IOSP (200 mg/L), loess (200 mg/L), and IOSP+1oess (200+200 mg/L. IOSP+1oess (200+200 mg/L) especially demonstrated plastic flow properties at a lower shear rate.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.7-8
• /
• 2017

최근 ARM 프로세서의 가상화 확장 기술을 이용하는 임베디드 시스템에서 다종의 OS 작동을 지원하는 하이퍼바이저가 많이 개발되었다. 가상화 기술은 하드웨어 자원을 효과적으로 사용한다는 이점이 있지만, RTOS를 작동시킬 경우 하이퍼바이저의 오버헤드에 의해 RTOS의 성능이 저하될 수 있는 문제가 발생한다. 본 논문에서는 가상화 기술을 지원하는 ARMv7 Cortex-A15 프로세서를 탑재한 NVidia Jetson TK-1 임베디드 보드에서 RTOS가 단독으로 작동했을 때의 성능과 QPlus Hypervisor를 통해 Linux OS와 함께 RTOS가 작동했을 때의 성능을 측정하고 비교 분석 하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.217-224
• /
• 2009

The traditional small educational multi-joint robots were developed on firmware. In these system's case, we cann't give a chance to educate good practices due on executing just robot's simple movements. But it may be possible for RTOS to control the elaborate movement of the robot with assembling each part on firmware. With this RTOS, we can enhance the efficiency of robot's movements, but too difficult to use the education as increasing the complexity of robot system. To solve the problem, we apply with Design pattern and Refactoring for the Education. Applying robot's design with Design pattern and Refactoring. There may be easily understand what and how to design RTOS for any level ones. We may easily change/upgrade RTOS for new system with this approach. This paper mentions to design RTOS with Design patterns and to apply RTOS's source code with Refactoring.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.8
• /
• pp.560-564
• /
• 2003

Thick oxide layer was fabricated by anodic reaction and complex oxidation performed by combining low temperature thermal oxidation (50$0^{\circ}C$, 1 hr at $H_2O$/O$_2$) and a RTO (rapid thermal oxidation) process (105$0^{\circ}C$, 1 min). Electrical characteristics of OPSL (oxidized porous silicon layer) were almost the same as those of thermal silicon dioxide prepared at high temperature. The leakage current through the OPSL of 20${\mu}{\textrm}{m}$ thickness was about 100 - 500 ㎀ in the range 0 V to 50 V. The average value of breakdown field was about 3.9 MV/cm. From the XPS analysis, surface and internal oxide films of OPSL prepared by complex process were confirmed completely oxidized and also the role of RTO process was important for the densification of PSL (porous silicon layer) oxidized at low temperature.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1301-1306
• /
• 2011

RTOS in the embedded system is a powerful tool for the design of multi-tasking. However, previous RTOS has large proportion in the MCU with limited memory. So it is difficult to apply RTOS. In this paper, I removed less frequently used features from the traditional RTOS, and designed lightweight RTOS that schedules and manages the resources with minimal code. I used techniques to obtain user memory using sharing stack, and to reduce the overhead at context. Considering ratio of kernel and applications, the RTOS designed in this paper is available on the MCU with more than 4KB of program memory.