• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.3
• /
• pp.1-4
• /
• 2010

RS-485, communication bases from small network system must prepare in collision. The collision is that mean the data transfer breaks. For a stabilized communication chooses 1:N polling methods. But polling is low speed in addition to maybe overload Master device. So, usual N:N Prefers a communication. In this case, must be preparing to avoid collision or some solutions. Generally, to after collision retransmits after short time. It's called delay time for short time. When making a delay time, uses address of each systems. (Address of each node) If the many nodes collided, the each node has different delay time. When making a delay time, uses a usual random number. Making a random number is hard job. So uses a usual pseudorandom number. It is more difficult from small size MCU. The Chaos random number provides stabled value. Finally, when uses the Chaos random number, the stability and reliability of system get better.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.197-199
• /
• 2018

Recently, many industrial instruments face the problem of protocol compatibility with the external monitoring and control system. This paper is prepared in the main control board to support the industrial communication protocol conversion, control, and monitoring. The industrial communication gateway module is also designed to ensure that the protocol conversion of CAN bus and Ethernet. The main board processor is used the Atmega2560, and placed 4ea RS485 serial slots for sub-board. One of them is used for communication CAN bus and Ethernet. It provides analog and digital I / O through each of the slots is used for control and monitoring.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.281-283
• /
• 2016

Recently, many industrial instruments face the problem of protocol compatibility with the external monitoring and control system. This paper is prepared in the main control board to support the industrial communication protocol conversion, control, and monitoring. The industrial communication gateway module is also designed to ensure that the protocol conversion of CAN bus and Ethernet. The main board processor is used the Atmega2560, and placed 4ea RS485 serial slots for sub-board. One of them is used for communication CAN bus and Ethernet. It provides analog and digital I / O through each of the slots is used for control and monitoring.

• Journal of Biomedical Engineering Research
• /
• v.18 no.4
• /
• pp.373-380
• /
• 1997

In this paper, we describe the intrabed network in a patient monitoring system we developed The intrabed network handles data communication between the main unit of a bedside patient monitor and parameter modules plugged in it. We designed the intrabed network based on RS-485 and HDLC protocol with 1 Mbps data rate. Message exchanges are implemented based on three data structures of packet frame. and stream. We present the specification and the performance of the data communication network for the developed patient monitor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.553-556
• /
• 2014

최근 선박 전자 장비들이 디지털 인터페이스 표준을 위해 NMEA(National Marine Electronics Association)에서는 CAN Part B 표준 버스 프로토콜 기반의 네트워크 표준인 NMEA2000 표준을 개정하였다. NMEA2000는 네트워크상에서 PnP 기능을 가지는 멀티토커, 멀티리스너로서 네트워크 관리를 위한 서버가 필요 없는 멀티마스터의 실시간 제어 네트워크이다. 본 연구에서는 NMEA2000 기반의 선박 센서용 프로토콜 변환 알고리즘의 구현과 NMEA2000/CAN/Ethernet/RS422, RS485, RS232 포맷 변환 및 NMEA2000 기반 전용 케이블을 고려한 아날로그 데이터 모듈 외형 설계 및 개발을 목표로 한다. 본 연구를 통해 NMEA2000 핵심 기술의 개발과 적용을 통해 새로운 조선 IT 시장을 선점할 수 있을 것으로 기대된다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1670-1671
• /
• 2007

산업분야의 통신시스템에는 주로 RS232C 통신, RS485 통신, CAN 통신 등이 주로 사용되었다면 근래에는 고속통신이 가능하며 공장 자동화(CIM)나 시스템 통합에 편리한 이더넷통신이 사용되고 있는 추세이다. 즉, 기존의 PC와 프로세서간의 통신의 방식에서 랜 선을 이용하여 원거리에서 프로세서의 제어와 모니터가 가능하도록 구현되는 실정이다. 이더넷을 통해 연결된 시스템은 $10Mbps{\sim}100Mbps$의 빠른 속도로 모니터링과 제어가 가능하여 널리 사용되고 있다. 본 논문에서는 승압형 컨버터를 구현하기 위하여 마이크로프로세서는 컨버터의 입력전압과 출력전압이 필요하며 이를 마이크로프로세서 내부에 있는 12비트A/D변환기로 구현하였다. 전압 제어를 위해서 본 논문에서는 25us 마다 PWM의 ON/OFF 폭을 미리 예측한 후 타이머를 이용하여 A/D 변환을 하도록 하였다. 원 칩 마이크로프로세서인 DSP(TMS320F2812)의 PWM 기능을 이용하여 승압형 컨버터에서 출력되는 전압을 계측하여 PID 제어이론을 바탕으로 전압을 제어하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1672-1673
• /
• 2007

RS-232통신, RS-485통신, CAN통신 등 여러 가지의 통신 규격이 존재하고 있다. 이러한 통신은 하나의 독립된 시스템과 또 다른 시스템간의 데이터 교환 및 모니터링을 위해 사용되고 있다. 현재의 가장 주목 받고 있는 통신 방식은 이더넷 통신이다. 이더넷은 하나하나의 시스템이 거미줄처럼 연결되어 결론적으론 하나의 커다란 묶음으로 묶여있는 시스템이다. 때문에 세계 그 어느 장소든지 이더넷에 연결된 시스템은 지구 반대편의 시스템과도 연결이 가능하다. 이더넷을 통해 연결 된 시스템은 최대 100Mbps의 빠른 속도로 복수 객체의 동시제어가 가능한 이유 등으로 가장 많이 사용되는 추세이다. 본 논문에서는 3상 AC 모터의 속도 제어시스템을 구성하고 이더넷을 통하여 원격제어 및 각 변수의 변화하는 값을 원격 모니터링 하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.283-284
• /
• 2021

The domestic and overseas IoT (Internet of Things)-based automation industry is developing remarkably, and the development of this automation technology is further accelerated by the development of sensor technology. In recent years, the smart farm industry for the purpose of growing crops based on various sensor technologies is rapidly developing. In the case of smart farms, real-time monitoring and mobile services are provided by measuring representative environmental data such as temperature, humidity, and CO2 required for crop cultivation. Most of these environmental monitoring and control operations use the RS-485-based Modbus (RTU) communication method. In this paper, we intend to test the performance of sensor data and actuator information required for smart farm construction by building a platform for controlling sensor data and actuators based on LabView using MQTT (Message Queuing Telemetry Transport), an IoT standard protocol.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.32-37
• /
• 2019

In this paper, we have designed a solar photovoltaic system to attach solar photovoltaic modules to each module and develop the best efficiency in each module. The efficiency of the designed solar panel optimizer was more than 99.27% and MPPT efficiency of 99.66%. In addition, the monitoring of power generation and abnormal operation phenomenon in each optimum period and tracking for failure location of specific photovoltaic module have improved the utilization rate of photovoltaic power generation. Wired and wireless communication methods has been proposed to monitor the power generation and operation status of the solar panel optimizer. For this purpose, the RS485 communication was used for wire communication and Zigbee communication was used for wireless communication to monitor the status of each module in real time. It is shown that communication redundancy can be achieved through the proposed method, and the possibility of commercialization is suggested.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.35-40
• /
• 2023

For the EMC test, the radiation characteristics and immunity characteristics of the EUT are measured under the condition that the EUT maintains its normal operation. For normal operation of the EUT, it is necessary to operate the EUT and monitor its status through separate equipment outside the anechoic chamber. External equipment operates and monitors the EUT through various communications such as 1553B communication, RS-485 communication, and Ethernet communication. At this time, external equipment can transmit noise through the communication line. This noise is transmitted to the LISN through the connected power cable and measured. It is also radiated through the connection terminal to the LISN. In this case, the communication line is the power line It should be designed so that noise is not transmitted through electromagnetic isolation as much as possible. In addition, noise from external equipment must be suppressed as much as possible from entering the chamber through the communication line. In this paper, external EUT test equipment applied for EMC test It explains the considerations in the design and manufacture of the design and explains the satisfaction of the design through tests including CE and RE.